-
Housed in a convenient 500 series lunchbox-style chassis, the dbx 510 Subharmonic Synthesizer is designed to enhance the low end in live sound reinforcement applications, such as for mobile DJs, nightclubs, houses of worship, theaters, concert venues, broadcast, and more. It does this by synthesizing a waveform modeled bass note, exactly one octave below the bass signal of the original audio. In comparison to other forms of low frequency enhancement, this approach does not affect the equalization of the mid or high frequencies.
The module offers two separate bands of bass synthesis, each with a knob for setting the level of the synthesis, as well as an overall subharmonics level control and a low frequency boost control. A synthesis bypass button allows you to A/B the effect of the module on your signals and LED indicators provide visual feedback of the process.
Sku: DBX510DBX 510 Subharmonic Synthesizer (500 Series Module)
AED1,014.00 inc. VAT -
Housed in a convenient 500 series lunchbox-style chassis, the dbx 520 De-Esser is designed to tame excessive sibilance sounds which often occur in vocals and other high frequency content such as percussive instruments and problematic material with heavy amounts of reverb. Drawing from the design of the dbx 902, the unit allows you to adjust the amount of de-essing to create crisp vocals.
The unit operates by examining the difference in level between high frequency and full-bandwidth portions of the signal. It allows de-essing of signals by as much as 60 dB. The unit features a frequency control with a range from 800 to 8,000 Hz with gain reduction metering and a de-essing amount range from 0 to 20 dB. It also includes an In/Out switch for comparing the processed and unprocessed signals, as well as a High Frequency (HF) mode switch.
Sku: DBX520DBX 520 De-Esser (500 Series Module)
AED1,014.00 inc. VAT -
Housed in a convenient 500 series lunchbox-style chassis, the dbx 530 Parametric Equalizer is based on the classic dbx 905 and offers three distinct filters bands with dedicated frequency bandwidth (Q) control. Up to 15 dB of reciprocal cut or boost may be applied.
For problematic situations that require the removal of a spurious frequency, each filter band may be independently set to "infinite notch" without affecting the operation of the other bands. The equalizer's high and low bands can also be independently switched from peaking to shelving operation. The unit's "In" button allows you to compare the affected/bypassed signal.
Sku: DBX530DBX 530 Parametric Equalizer (500 Series Module)
AED1,410.00 inc. VAT -
Housed in a convenient 500 series lunchbox-style chassis, the dbx 560A Compressor/Limiter uses VCA-based compression with the same switch-selectable OverEasy and Hard Knee compression curves as found in the industry standard dbx 160A rackmount processor. Offering a wide-ranging threshold, ratio, and output controls as well as true RMS level detection provides dynamic processing with a natural sound signature. It can add punch to drums, bass, vocals, and more. The unit is also versatile enough to go from subtle compression to brickwall limiting.
You can select low ratios and OverEasy compression to smooth out fluctuating vocal and instrumental levels or use the unit's Hard Knee compression and higher ratios for protection against overload distortion in digital recording, P.A. systems, and broadcast signals.
Sku: DBX560ADBX 560A Compressor/Limiter (500 Series Module)
AED1,411.00 inc. VAT -
Housed in a convenient 500 series lunchbox-style chassis, the dbx 580 Mic Preamp offers up to 60 dB of low-noise amplification for even the most esoteric microphones. The device will transform the microphone's low-level output signal to a high-level, high-current output for direct connection to the line-level input of a mixer, sampler, or other recording medium.
The pre features a variable frequency low-cut filter with both low and high detail equalization controls. It also features a 20 dB pad, a polarity invert button, selectable +48V phantom power, a front-panel instrument input, VU metering, and a peak indicator LED.
Specifications
Series 500 Rack Spaces 1 Dimensions Not specified by the manufacturer Weight Not specified by the manufacturer Packaging InfoPackage Weight 1.75 lb Box Dimensions (LxWxH) 10.1 x 6.3 x 3.6" Sku: DBX580DBX 580 Mic Preamp (500 Series Module)
AED1,695.00 inc. VAT