Brand |
---|
BSS BLU-100 Audio Soundweb London 12×8 Signal Processor with BLU Link
Brand: BSSAED10,358.00 inc. VAT
Available in stock
The BSS Audio Soundweb London BLU-100 12x8 Signal Processor with BLU Link is a DSP processor designed for use in networked audio routing applications. It offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing, and a high bandwidth, fault tolerant digital audio bus.
The BLU-100 features open architecture with full configuration through HiQnet London Architect. A palette of processing and logic objects and "drag and drop" method of configuration provide a simple and familiar design environment. This processor features a low-latency, fault-tolerant digital audio bus of 48 channels, which uses standard Category 5e cabling, providing a distance of 100 yards between compatible devices. Fiber media converters can be used to increase the distance between devices to over 24 miles.
People Also Viewed
Description
The BSS Audio Soundweb London BLU-100 12×8 Signal Processor with BLU Link is a DSP processor designed for use in networked audio routing applications. It offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing, and a high bandwidth, fault tolerant digital audio bus.
The BLU-100 features open architecture with full configuration through HiQnet London Architect. A palette of processing and logic objects and “drag and drop” method of configuration provide a simple and familiar design environment. This processor features a low-latency, fault-tolerant digital audio bus of 48 channels, which uses standard Category 5e cabling, providing a distance of 100 yards between compatible devices. Fiber media converters can be used to increase the distance between devices to over 24 miles.
The BLU-100 is compatible with the entire Soundweb London family, and its 48-channel digital audio bus represents channels 1-48 of the larger 256-channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, and BLU-BOB devices. Analog Inputs provide software-configurable gain in 6 dB increments up to +48 dB per channel and software-selectable Phantom Power per channel. Phantom Power, Signal Present, and Clip information per channel is accessible without the requirement for a PC, from the clear front-panel LED indicators.
A bidirectional locate function allows devices to be identified both from and within HiQnet London Architect. 12 Control Inputs and 6 Logic Outputs allow the BLU-100 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, a comprehensive documentation which details how Soundweb London systems can be integrated with third-party control systems, is included within the installation of HiQnet London Architect.
Features
- 12 analog inputs (with +48V phantom power per channel)
- 8 analog outputs
- Configurable signal processing
- Rich palette of processing and logic objects
- 48-channel, low-latency, fault-tolerant digital audio bus
- Clear front-panel LED Indicators
- Bidirectional locate functionality
- 12 control inputs and 6 logic outputs for GPIO integration
- Soundweb London interface kit for third-party control system integration (documentation)
- HiQnet device
- Configuration, control, and monitoring from HiQnet London Architect
Specifications
Input | Signal Present, CLIP, 48 V (Input Only) |
Other | COM, STAT, ERR, PWR |
Mic/Line Inputs | 12 x Electronically Balanced on Phoenix Combicon Removable Screw Connectors Nominal Gain 0 dB, Electronically Switchable up to +48 dB, in +6 dB Steps |
Input Impedance | 3.5 Kilohms |
Maximum Input Level | +20 dBu with 0 dB Input Gain, +8 dBu with 12 dB Gain |
CMRR | > 75 dB at 1 kHz |
EIN | < -128 dBu Typical with 150-Ohm Source |
Phantom Power | 48 V Nominal, Selectable per Input |
Latency | A/D Latency: 37/Fs [0.77 ms @ 48 kHz] |
Outputs | 8 x Electronically Balanced on Phoenix/Combicon Removable Screw Connectors |
Maximum Output Level | +19 dBu |
Frequency Response | 20 Hz to 20 kHz (+0.5 dB / -1 dB) |
THD | < 0.01% 20 Hz to 20 kHz, +10 dBu Output |
Dynamic Range | 108 dB Typical, 22 Hz to 22 kHz, Unweighted |
Crosstalk | < -75 dB |
Output Impedance | 40 Ohms Balanced, 20 Ohms Unbalanced |
Latency | D/A Latency: 29/Fs [0.60 ms @ 48 kHz] |
Control Ports | 12 Inputs and 6 Outputs |
Input Voltage | 0 to 4.5 V |
Input Impedance | 2-Wire Mode: 4.7 Kilohms to +5 V 3-Wire Mode: >1 Megohm |
Output Voltage | Logic Output Voltage: 0 or +5 V Unloaded |
Output Impedance | Logic Output Impedance: 440 Ohms |
Output Current | Logic Output Current: 10 mA Source, 60 mA Sink |
Output Current | Opto Output Current: 14 mA Maximum |
Voltage | Withstanding Voltage: 80 V Maximum (Off) |
Impedance | Series Impedance: 220 Ohms (Isolated) |
Connectors | RJ45 Ethernet Connector |
Maximum Cable Length | 300′ / 100 m on Cat 5e Cable between Devices |
Number of Maximum Nodes | 60 |
Latency | 11/Fs [0.23 ms @ 48 kHz] Pass-Through Latency: 4/Fs [0.08 ms @ 48 kHz] |
Mains Voltage | 100 to 240 VAC, 50/60 Hz |
Power Consumption | < 55 VA |
BTU | < 188 BTU/Hour |
Operating Temperature Range | 41 to 95°F / 5 to 35°C |
Dimensions | 1.75 x 19 x 9″ / 45 x 483 x 229 mm |
Weight | 6.4 lb / 2.9 kg |
Package Weight | 10.2 lb |
Box Dimensions (LxWxH) | 23.8 x 15.6 x 4.8″ |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.