The white NuQ122-AN 2500W 2-Way 12″ Full-Range Powered Loudspeaker from Turbosound is ideally suited for a wide range of portable and fixed installation speech and music sound-reinforcement applications. Designed to work individually without a controller, the NuQ122-AN Loudspeaker provides optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge-monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.
The NuQ122-AN Loudspeaker features a 12″ low-frequency driver with a low-mass voice coil for improved transient response and an aluminum dome with 1″ neodymium high-frequency compression driver, which is mounted on a rotatable 70° horizontal by 70° vertical-dispersion converging-elliptical waveguide. Output power for the NuQ122-AN Loudspeaker is provided by means of an efficient and lightweight KLARK TEKNIK 2500W Class-D power amplifier. An easy-to-use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive full-range response at low volume levels and transparent limiting for clarity at high-output levels as well as for long-term reliability.
Features
- 2-way full-range powered loudspeaker for portable PA applications
- 2500W power featuring KLARK TEKNIK Class-D technology for total system control
- ULTRANET digital-audio networking connects to mixers and other sources
- 12″ low-frequency driver with low-mass voice coil for improved transient response
- Aluminum dome with 1″ neodymium motor-compression driver
- Low-distortion waveguide provides 70° H x 70° V dispersion
- Fully featured user interface with LCD display for ease of navigation
- PC remote control software downloadable
- 15mm birch plywood enclosure with hard-wearing semi-matte white paint finish
- Rugged powder-coated perforated steel-mesh grille
- Integral 35mm pole mount and handles
- Multiple internal rigging points allow bracket mount and suspension in any orientation
- Mains input on Neutrik powerCON connector
Specifications
Frequency Response | 55 Hz to 18 kHz (±3 dB) 50 Hz to 20 kHz (-10 dB) |
Nominal Dispersion | 70° H x 70° V @ -6 dB points |
Maximum SPL | 131 dB peak |
Crossover Type | Active |
Transducer | 1 x 12″ ( 315.5) LF driver 1 x 1″ (25.4 mm) HF compression driver |
Limiter | Independent HF, LF, peak and rms |
Maximum Output Power | 2500 W |
Type | Class-D |
Protection | Short circuit, thermal |
Input/Output | 1 x Combo Jack / XLR 1 x XLR |
Sensitivity | +4 dBu or +14 dBu software switchable |
Input Impedance | 40 kOhms; balanced |
Maximum Input Level | +22 dBu |
Connectivity (RJ-45) | 2 x RJ45 |
Mains Supply | Neutrik powerCON 20 A |
DSP | Rotary push-encoder and level control Buttons for Process, Setup, Exit, Enter |
Display | LCD 128 x 32, blue, backlit |
Delay | 0 to 300 ms |
Equalization | High- and low-shelving EQ 2 x parametric EQ Presets: Positioning, Sound mode, FBQ |
Limiter | Zero attack input limiter |
Presets | 20 total presets, 19 user-defi nable |
Crossover | High Pass L-R 24 dB/oct |
Protection | Lock-out function for all settings |
Processing | 24-bit, 44.1/48 kHz sample rate (digital) |
Converter Type | 24-bit, delta-sigma |
System | Signal 16 channels Latency < 0.9 ms Frequency response 20 Hz to 20 kHz (+0 / -3 dB) Dynamic range typical 92 dB |
Cabling | Shielded Cat5 Maximum 246 ft / 75 m (recommended) |
Power Consumption | 90 W @ 1/8 max power |
Voltage | 120 V, 60 Hz (T 15 Ah 250 V) |
Construction | 0.6″ (15 mm) birch plywood |
Grille | Powder-coated perforated steel |
Dimensions | 25.8 x 14.7 x 13.4″ (65.6 x 37.4 x 34.0 cm) |
Weight | 44.5 lb (20.2 kg) |
Reviews
There are no reviews yet.