Shop

High quality construction and a 1x12-inch HH Custom Driver make this the ultimate cab for your low to mid-powered amp! Laney designed the IRT112 cab to compliment the IRT models sonic output. Fitted with ergonomic side grab handles and light enough to be carried from gig to gig with no strain. The 12 inch Custom HH-designed speaker provides 80W Power handling.

The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It's loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.

One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You'll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.

The IRT412A has many design features to survive a life of gigging and touring. The solid plywood chassis is built to last, and finished in a rugged black tolex with metal corner protectors. Recessed side handles with comfortable bars enable easier transportation, whilst steel castors assist with moving this large cabinet to and from the stage. Everything about the design ensures longevity and reliability, and you can be sure the IRT412A will deliver its powerful tones night after night.

Hearing the guitar played through a 4 x 12 cabinet is a truly awe-inspiring experience; nothing quite matches it in terms of volume, spread of sound, and depth of tone. The IRT412A features 4 custom HH drivers to send your tone to the far side of the room and back again, and ensures you'll cover your stage with a wall of sound. This cabinet is designed to work with the Ironheart range of amplifiers but will work equally well when paired with your favourite amp, giving you both punch and clarity in a durable, road-ready package.

The new IRONHEART  2 x 12" combo - the IRT60-212 bangs out 60 watts RMS of all ECC83 & 6L6 valve tone with masses of gain and like its metal relatives - such as the Laney KLIPP and the Laney AOR hits you hard between the eyes like a power hammer from hell!

The Combo houses three sonically distinct channels: - Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone. 

The IRT60-212's Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.

The Pre Boost feature makes the need to carry additional boost pedals redundant! Something any gigging player will admit is a great feature.  On the IRT60-212 the footswitchable Pre Boost works just like kicking in your favourite boost pedal right before your amp.  It's available where ever you are on the preamp and can be switched in or out via the supplied footswitch.

A standout feature of the IRT60-212 range is the WATTS control in the master section.  This allows you to really screw down the output of the IRT60-212's 2 x 6L6 output section, down to less than 1 watt!  Great for getting the sound of a full -blown metal head at bedroom levels.

Combine this with a Dynamics control which tightens up you low end when you're playing a full power and you have a great metal tone at whatever level you decide to play at.

The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.

Lionheart represents everything we've learned through forty years of Laney tube heritage, distilled into a single ampilfier range. Designed to deliver the ultimate tone of a tube being pushed hard - warm and expressive, at an output level which can be used in everyday environments.

This twin channel, all tube amplifier features 'Parallel single-ended' Class A output from 4x EL84 matched tubes, providing 20 watts of rich tube power.

The L20H also features gold plated PCB's and jack sockets. Sealed gold contact relays are used in all signal paths for minimum sound coloration, and the amp comes fitted with the renowned "Type 4" large spring line reverb for the classic guitar reverb sound.

Each L20H features a hand stamped 'build number' in the order they come off the Laney production line, and comes with a custom made 'Lionheart' dust cover.

The L20T-112 combo features the same highly respected preamp design as the rest of the Lionheart range and consists of a clean and drive section with shared 3 band EQ, global reverb and an overall tone control.

The L20T-112's all valve power amp houses a road tested 20 Watt Class A parallel single ended EL84 equipped output section, not previously seen in a Lionheart 1 x 12 combo. This offers the player an increased headroom option in a combo whilst still giving masses of vintage valve tone in a compact stylish package.

The rear panel of the L20T-112 features a footswitch socket for switching channel and reverb with the FS2 provided, an FX loop for connecting external FX devices and finally an external speaker socket for adding an additional speaker enclosure such as the LT212. The L20T-112 also features the innovative folding tilt mechanism that has proved popular on the rest of the Lionheart range.

The L20T-112 can sound either vintage or modern depending on how you use the preamp controls - back off the gain, wind up the master and you're cooking up serious retro tone. Digging in hard produces extra bite, or backing off cleans it all up.

The Lionheart range is a significant amplifier in todays market offering serious tone that's often difficult to find even in products costing twice the price. Lionhearts are easy to use and most players will get a great tone out of them within seconds.

The L5T-112 is a 5 watt Single-Ended, Class 'A' tube combo loaded with a 12" Celestion G12H 70th Anniversary driver to give the ultimate boutique guitar tone. Play through a Lionheart – it reacts to your touch. From the moment you strike a note you’re connected. Let the music flow through you – from your fingers to the guitar, through the amplifier to the beating heart of the speaker. You are one. You are Lionheart.

The L5T-112 features a chrome twin channel pre amp with a Bright switch, shared 3-band EQ, global Tone and Studio-quality Digital Reverb. Constructed from Marine Grade Plywood with retro banding strip and leather strap handle, the L5T-112 looks as good as it sounds.

Designed and engineered with pride in Great Britain, The Lionheart L5T-112 is a 5 watt, Single-Ended, Class ‘A’ guitar combo loaded with a 1 × 12 Celestion G12H 70th Anniversary driver, all designed to give the ultimate guitar tone.

With less of a emphasis on preamp distortion, with the L5T-112 you can hear and feel the power tubes clipping to breakup, giving a much richer harmonic content and a larger dynamic range. With the L5T-112 you can really feel and hear the differences in tone based on your picking technique.

The LA20C produces 20W RMS through a custom designed 8" driver fitted with a co-axial tweeter for pure acoustic brilliance. It's single-channel preamp features a single input, Lo, Parametric Mid & Hi EQ for accurate tonal shaping, a switchable chorus and an on-board reverb. It features an aux. input and a DI out, allowing for the option of plugging into larger PA venues for crystal-clear acoustic sound, whatever the volume. Another great feature of the LA20C is the anti-feedback circuitry eliminating the chances of acoustic feedback when in use.

The LG20R takes its tonal cues from its bigger tube brothers. The clean channel chimes away nicely and takes on a pleasant bite at higher volumes. Switch to the drive channel, set the drive and the master controls as desired, and the LG range will yield a range of tones, from just breaking up to saturated sustain, with an increasing degree of crunch and raunch in between. On both channels the three band tone controls contribute a subtle degree of shaping rather than creating extreme sounds.

The LG35R delivers 35 watts and features a pre-amp with clean and crunch sounds, shared 3 band EQ, REVERB and an AUX input - Perfect for practice! The LG35R takes its tonal cues from its bigger tube brothers. From clean chimes to full on rock and everything in between.

The L35R's Aux input socket makes jamming and learning new songs a blast and the on-board reverb provides a nice natural splash of colour to your overall sound. Perfect for the bedroom, rehearsal, and also great for recording.

On-board studio quality reverb. Reverb gives you a sense of the space that you are in. A dry guitar signal can sound a little dull. Adding the right about of reverb provides the guitar signal with ambience and brings it to life.

Some players like a lot of control over their tones and effects, some players are happy with simple straight ahead tone and effects combinations which sound great with the minimum amount of fuss. The Linebacker range is directed fairly and squarely at this later category of players. The LR5 is the smallest unit of the range and offers some unique features to the Laney amp lineup. The LR5 offers a single guitar channel featuring the same amp models as it's bigger brothers, but adds in a Mic/Line channel and battery powered portability - a feature not seen in any other Laney amp. The LR5 comes supplied with a carry strap to get you out and about from the get go, when you're not carrying the amp the strap doubles up as a guitar strap - nice touch!

If you have the Laney L20H, you won't want to compromise that great Class A tone by using any old cabinet. Instead, why not get the matching Laney LT212 cabinet. Featuring 2x 12" Celestion Heritage G12H Drivers and closed back construction, this cab gives thick, deep tones with growling bottom end power. This stylish and great sounding cab also features a folding tilt mechanism for optimum sound projection. Each LT212 features a hand stamped 'build number' in the order they come off the Laney production line, and comes with a custom made 'Lionheart' dust cover. At 19kg this cab will easily fit into your regular gigging rig.

The LV300 features a pre-amp valve – housing Tube Fusion Technology in its hybrid design. Giving you that legendary Valve Mojo to the pre-amp drive tones! Plus another benefit of a hybrid design is a lack of weight – any model in the LV range can be loaded in and out of a car boot or van without fear of injury but is as tough as it needs to be to withstand the rigours of gigging!

V is more to these amps than just being in the word LiVe – each drive channel features a V switch. The V switch gives you an instantly scooped tone. The nice thing is that there is one per channel – giving you flexibility to scoop the rhythm tone whilst leaving the solo tone unaffected. Next comes the VTS switch – this feature globally boosts certain bass and upper mid frequencies whilst cutting some of the lower mid.

Finally, the digital reverb section with individual controls for the clean and the drive channels, a really nice user-friendly feature.

The rear panel of the LV300 features everything you need – simple series effects loops an extension speaker socket and a footswitch socket. Each model in the LV range comes supplied with a sturdy metal FS3 custom three way footswitch!

The LV300 is geared towards live performance. Loud. Stage worthy and refreshingly user friendly. Finished in a tough black tolex with large protective corners the LV300 will look as good as it first did gig after gig.

The three-channel LV300H is a gig-ready head packed with features for live use. Guitarists know that tubes add warmth and character to most classic guitar sounds but tube amps can be heavy and more expensive. The LV300H preamplifier is therefore equipped with a real ECC83 tube to combine the practicality and portability of a solid-state amplifier with the benefits of tube tone. Each of the 2 Drive channels features a ‘V’ switch. This gives you an instantly scooped tone plus as there is one per channel it gives the flexibility to scoop the rhythm tone whilst leaving the solo tone unaffected. Next comes the VTS switch. On-board reverb provides ambiance to the amp tone and different reverb levels can be set to Clean and Drive sections.

The LX10B is a compact, plug and play practice amplifier designed specifically for bass guitar. The LX10B is a simple-to-use and compact amplifier combo designed specifically for bass guitar. It delivers deep bass tone with ease and is ideal for practice.

Teaching and rehearsal. The LX10B's channel features a 2 band EQ for tone shaping plus a Shape switch – this provides a great sounding “go to” setting from a single button press. The mini-jack AUX input allows for connection of a playback device such as MP3/iPod/CD for jamming along to songs or backing tracks.

Plus there is a headphone socket – a great feature for private practice or silent late-night sessions. Available in Black, Red and Camo.The mini-jack AUX input allows for connection of a playback device such as MP3/iPod/CD for jamming along to songs or backing tracks.

The LX10B is a compact, plug and play practice amplifier designed specifically for bass guitar. The LX10B is a simple-to-use and compact amplifier combo designed specifically for bass guitar. It delivers deep bass tone with ease and is ideal for practice, teaching and rehearsal. The LX10B's channel features a 2 band EQ for tone shaping Plus a shape switch – This provides a great sounding “go to” setting from a single button press. The mini-jack aux input allows for connection of a playback device such as MP3/iPod/CD for jamming along to songs or backing tracks, Plus there is a headphone socket – A great feature for private practice or silent late-night sessions.

The LX120RT packs a mean punch when it comes to gig worthy combos. It’s twin channel pre-amp covers all the bases from a tone point of view and it’s 2 × 12” HH drivers handle everything the 120 watts RMS output section throws at it whilst still remaining portable and easy to lug round in the boot of your car or back of the van.

The LX15 delivers 15 watts RMS of huge Laney guitar tone into a pair of twin loudspeakers. The LX range of solid-state electric guitar amplifiers offers legendary Laney guitar tone and reliability from practice room to stage.BRITISH DESIGN With 15 watts RMS power and twin 5” speakers, the LX15 delivers huge Laney sound at a very modest price. MASTER VOLUME The LX15 features a classic ‘master volume’ style preamp allowing gain and master level to be balanced independently. GREAT TONES With a 3-band EQ tone stack plus a Drive switch to add distortion, an assortment of great tones can be dialled in from spanky clean to overdrive sounds with real punch. PRIVATE PRACTICE The mini-jack AUX input, allows for connection of a playback device such as MP3/ipod/CD for jamming along to songs or backing tracks, plus there is a headphone socket for doing so quietly –a great feature for private practice or late night sessions.

The Laney LX15B offers big bass tones right out the box – designed to give you sonic performance bigger than its small size! The LX15B is a simple-to-use and compact amplifier combo designed specifically for bass guitar. It delivers punchy bass tone with ease. LX15B’s instrument channel features a 3 band EQ for tone shaping plus a Shape switch – this provides a great sounding “go to” setting from a single button press. A pre-selected compressor setting can be added with a simple switch. This adds punch to the original bass sound.
The mini-jack AUX input, allows for connection of a playback device such as MP3/iPod/CD for jamming along to songs or backing tracks, plus there is a headphone socket for doing so quietly –a great feature for private practice or late night sessions. The LX15B’s 15W RMS power stage is couple to a pair of custom-designed 5” woofers giving broad sound dispersion and impressive output level.

The Laney LX20R is more than just a practice amp with its rugged metal grille, metal corners and tattoo graphics giving it the looks and strength to be taken to the extreme. Twin channels, spring reverb, global 3 band EQ, a 1x8" Custom speaker, CD input (ideal for playing along to your favourite tunes) and headphone socket.

The LX35R features a twin channel preamp – giving aggressive extreme gain options plus a clean channel for softer moments. Featuring a 3 band EQ tone stack, gives you instant tone shaping options to suit the guitar and music style. Kick in the 'XTS' tone shaping switch for an instant scoop to the mid and a boost to key frequencies.

On-board reverb can be dialled in to add ambience to the tone plus an AUX input for jamming along and a headphone socket are great features for private practice or silent late-night sessions. For an expanded performance rig, the External Speaker socket can also be used to bypass the internal 10” driver and hook up to a larger cabinet (such as the LX412). Available in Black, Red and Camo.On-board studio quality reverb. Reverb gives you a sense of the space that you are in. A dry guitar signal can sound a little dull. Adding the right about of reverb provides the guitar signal with ambience and brings it to life.