-
The 8000-425B from Genelec is a height-adjustable table stand designed to support the 8020B and 8030A monitor speakers. The stand has a round base plate that can attach to a table or flat surface. Mounting hardware is included that can secure the stand to a table up to 1.57" (40mm) thick.
The stand has a telescopic length between 11.8 - 20.7" (301 - 527mm) to position your speakers above or behind a computer monitor. For better speaker positioning, the stand can be used with an IsoPod (sold separately).
Sturdy tube designHeight-adjustable for positioning speakers above or behind computer monitorsTable mounting hardware includedSku: 8000-425BGenelec 8000-425B Adjustable Height Table Stand (301-527 Mm)
AED237.41 inc. VAT -
The 8000-406 Short Table Stand from Genelec provides a raised position for nearfield monitors. It can be used with the Genelec 8010, 8020, 8030, and 8040 studio monitors (sold separately). Featuring a heavy black cast-iron base with an anti-vibration rubber ring for stability, the stand's base diameter is 7.1" and the 6.1" height tube has a 3/8" thread on the other end. The stand must be used together with a stand plate (sold separately).
Sku: 8000-406Genelec 8000-406 Short Table Stand (17 Cm)
AED237.41 inc. VAT -
Mount for attaching Beam to a mounted TV.?Easily and securely hang Sonos Beam with the custom designed wall mount.?Choose from all white or black to complement your Sonos Beam.?The bottom cover of Sonos Beam includes two mounting points to secure the product to the wall mount.
Compatibility: Sonos Beam sound bar Dimensions (W x H x D): 63.8 x 12.1 x 3.1cmSku: BM1WMWW1BLKSonos BM1WMWW1BLK Wall Mount for all-new Sonos Beam Sound Bar- Easy to install Speaker Wallmount Kit – Black
AED259.00 inc. VAT -
Mount for attaching Beam to a mounted TV. Easily and securely hang Sonos Beam with the custom designed wall mount. Choose from all white or black to complement your Sonos Beam. The bottom cover of Sonos Beam includes two mounting points to secure the product to the wall mount.
Compatibility: Sonos Beam sound bar Dimensions (W x H x D): 63.8 x 12.1 x 3.1cmSku: BM1WMWW1Sonos BM1WMWW1 Wall Mount for all-new Sonos Beam Sound Bar- Easy to install Speaker Wallmount Kit – White
AED259.00 inc. VAT -
Mount your Sonos One or PLAY:1 speaker to the wall with the black?Sonos Shelf. It is designed specifically to match the contour, color, material, and finish of your black speaker and allows you to place the speaker on either the left or right side of the shelf, providing room for additional compact objects, such as your phone. The internal wraparound cable management design helps keep your installation looking neat.Sku: S1SHFWW1BLK
Sonos S1SHFWW1BLK Shelf for One and Play 1 -Black
AED259.00 inc. VAT -
Mount your Sonos One or PLAY:1 speaker to the wall with the white Sonos Shelf. It is designed specifically to match the contour, color, material, and finish of your white speaker and allows you to place the speaker on either the left or right side of the shelf, providing room for additional compact objects, such as your phone. The internal wraparound cable management design helps keep your installation looking neat.Sku: S1SHFWW1
Sonos S1SHFWW1 Shelf for One and Play 1 -White
AED259.00 inc. VAT -
Custom molded in the UK to fit the contours of the Denon Prime 4 controller. Designed for the digital DJ, our super durable polycarbonate shell offers a high level of protection and slides straight into protective cases, making it ideal for travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Prime 4 covered.
Sku: DS-PC-PRIME4Decksaver DS-PC-PRIME4
AED349.00 inc. VAT -
Styled in a smoked/clear finish to preserve visibility, the Decksaver Cover for Pioneer XDJ-XZ Controller is a tough, protective cover engineered specifically to safeguard your Pioneer XDJ-XZ against impacts, dust, and spillage at home, in the club, or on the road. This sleek polycarbonate top cover is custom-molded to precisely fit the contours of your XDJ-XZ while allowing you to keep it fully connected and ready for use. The cover provides an additional level of protection inside flight cases and gig bags, shielding the delicate jog wheels and controls from damage during transportation.Sku: DS-PC-XDJXZ
Decksaver DS-PC-XDJXZ
AED349.00 inc. VAT -
The deck saver Pioneer ddj-sx3 cover was designed to fit all Pioneer DDJ-SX and RX models. Deck saver covers are tailor-made to exacting standards to fit each unit like a glove. Rather than using cheaper inferior acrylic, each one is made from polycarbonate - A very hard we a ring plastic used in bullet proof glass - and made to fit your gear as closely as possible. The use of polycarbonate means that thinner material can be used, making for discrete, strong yet attractive protection for your decks. Great care is taken to trim Each deck saver Pioneer ddj-sx3 cover achieve the best fit and still leave cables in place.
Sku: DS-PC-DDJSX3Decksaver DS-PC-DDJSX3
AED299.00 inc. VAT -
Custom molded to fit the contours of the Pioneer XDJ-RX2. Designed for the digital DJ. Our super durable polycarbonate shell offers a high level of protection. Slides straight into controller bags, ideal for the traveling DJ. Finished with a high quality smoked/clear sheen, The cover shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Deck saver has your XDJ-RX2 covered.Sku: DS-PC-XDJRX2
Decksaver DS-PC-XDJRX2
AED299.00 inc. VAT -
Deck saver covers are tailor-made to exacting standards to fit each unit like a glove. Rather than using cheaper inferior acrylic. each one is made from Polycarbonate - a very hardwearing plastic used in bullet proof glass - and made to fit your gear as closely as possible. The use of Polycarbonate means that thinner material can be used. making for discrete. strong yet attractive protection for your decks. Great care is taken to trim each Deck saver to achieve the best fit and still leave cables in place.
Sku: DS-PC-DJM900NXS2Decksaver DS-PC-DJM900NXS2
AED299.00 inc. VAT -
Designed and engineered in the UK for the Pioneer CDJ-2000 NXS2 Multiplayer - trusted by professional DJs and clubs across the globe to preserve the lifespan of their equipment. Custom made from super strong polycarbonate to protect the platter, fader and controls in the booth and during transportation. Each Decksaver is custom moulded for a perfect fit whilst making allowances for cables - the CDJ-2000 NXS2 can sit ready for operation. Includes fitted faceplate to protect platter from scratches. From Pacha NYC to Space Ibiza and back again, the constant you'll find is Decksaver.
Sku: DS-PCFP-CDJ2000NXS2Decksaver DS-PCFP-CDJ2000NXS2
AED299.00 inc. VAT