-
The Electro-Voice ETX-18SP is a high-output active subwoofer well suited for mobile entertainment, AV rental, event production, clubs, and performance venues. The 18" direct radiating driver is powered by a 1800W Class-D amplifier, which delivers high sound pressure levels with dynamic and musical sound reproduction of very-low frequencies. The on-board DSP provides true cardioid performance across the full operating bandwidth, maximizing low-frequency output from the front, while minimizing energy around the sides and rear of the setup. Three ETX-18SP subwoofers are needed for cardioid deployment.Electro-Voice ETX-18SP 18″ 1800W Powered Subwoofer
AED9,164.00 inc. VAT -
The Electro-Voice EXT-35P (Single) is a high-power three-way loudspeaker; it can be used in a variety of portable and permanent applications. The DSP (Digital Signal Processing) menus offer extensive configurations, crossovers, selective voicing, protection limiters, EQ modes and a lockout mode prevents casual changes to the system. Loudspeaker system performance is optimized via an LCD screen. The front LED indicates power or can be configured to indicate limit.
Electro-Voice ETX-35P Dual 15″ 2000W 3-Way Full Range Powered Speaker
AED8,894.00 inc. VAT -
The white Electro-Voice EVID C10.1 is a passive 10" in-ceiling installation subwoofer with a multi-tap transformer designed to deliver reliable low-frequency reinforcement for foreground music systems in waiting rooms, offices, retail stores, restaurants, and more. When driven by your 70V, 100V, or 8-Ohm power amplifiers (available separately), these subwoofers provide a continuous power capacity of 100W. Each EVID C10.1 is equipped with a 10" high-excursion woofer capable of covering the low-frequency range from 45 to 150 Hz.
Electro-Voice EVID C10.1 Passive 10″ 100W Ceiling Subwoofers (Pair, White)
AED2,236.00 inc. VAT -
The Electro-Voice EVID C12.2 is a passive 12" in-ceiling loudspeaker system with a multi-tap transformer designed to deliver reliable voice and music reproduction in waiting rooms, offices, retail stores, restaurants, and more. When driven by your 70V, 100V, or 8-Ohm power amplifier (available separately), this two-way speaker provides a power capacity of 100W RMS. The EVID C12.2 is equipped with a 12" coaxial transducer capable of efficiently covering frequencies from 85 Hz to 18 kHz.
Electro-Voice EVID C12.2 Passive 12″ 2-Way 100W Ceiling Speaker System (Pair, White)
AED2,411.00 inc. VAT -
The Electro-Voice EVID C8.2D has a specially tuned enclosure and 8-inch woofer to provide amazing bass response. The 1-inch waveguide-coupled tweeter give smooth controlled coverage out to 20 kHz. Perfect for installations where a flush-mount design is desired but demand for high-quality audio exists. A 4-point mounting system is included to make installations fast and easy.Electro-Voice loudspeakers use innovative design and materials to provide premium-level performance in a flush-mount ceiling format.
Electro-Voice EVID C8.2D 8″ 2‑way Coaxial Ceiling Speaker (Pair, White)
AED1,503.90 inc. VAT -
Shallow profile, ideal for tight wall or ceiling spaces,Tuned passive radiator extends bass, enhances performance. High quality 1-inch titanium dome tweeter. Full-bandwidth overload protection 70 V, 100 V, and 8 ohms operation in the same model for off-the-shelf versatility. Front-panel mode/wattage switch Fully-sealed enclosure provides superior isolation to protect adjacent rooms.Secure Phoenix-style pass-through connectors for easy wiring and installation. Four point “quick mounting” tabs for fast attachment in any wall cavity. Can-mounted transformer for enhanced rigidity .Ribbed back can eliminates flexing.
Electro-Voice EVID FM4.2 4″ 2‑way Flush‑Mount Loudspeaker (White, Pair)
AED2,008.00 inc. VAT -
The white Electro-Voice EVID-C4.2LP is a pair of 4" coaxial flush-mount installation speakers with low-profile backcans designed for placement in tight ceiling areas and work effectively as a background music and paging solution for offices, waiting rooms, and other similar spaces.
Electro-Voice EVID-C4.2LP – 4″ Low-Profile Ceiling Speaker (Pair, White)
AED1,962.00 inc. VAT -
The white Electro-Voice EVID-C6.2 is a pair of 6.5" coaxial flush-mount installation speakers with complete backcan enclosures designed for placement in tight ceiling areas and work effectively as a background music and paging solution for offices, waiting rooms, and other similar spaces.
Electro-Voice EVID-C6.2 – 6.5″ Ceiling Speaker (Pair, White)
AED1,476.00 inc. VAT -
The Electro-Voice EVID-P6.2 loudspeaker system is a complete two-way pendant loudspeaker. The package consists of a bezel assembly, magnetic grille, rear enclosure, 6.5-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a titanium dome tweeter. The EVID-P6.2 loudspeaker utilizes a 2nd order crossover network with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The EVID-P6.2 loudspeaker utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75W, 7.5W, 15W or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8 ohm bypass. Selection is via a convenient switch on the front baffle, easily accessible by removing the magnetic grille.
Electro-Voice EVID-P6.2B 75W 6.5 inch Pendant-mount Speaker – (Black, Single)
AED1,535.00 inc. VAT -
The Electro-Voice EVID-P6.2 loudspeaker system is a complete two-way pendant loudspeaker. The package consists of a bezel assembly, magnetic grille, rear enclosure, 6.5-inch coax two-way loudspeaker and internal line-matching transformer. The loudspeaker features a titanium dome tweeter. The EVID-P6.2 loudspeaker utilizes a 2nd order crossover network with a comprehensive protection circuit to protect the network, woofer, and tweeter drivers from excessive power levels. The EVID-P6.2 loudspeaker utilizes a transformer that offers a selection of 1.88 (70-V only), 3.75W, 7.5W, 15W or 30 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8 ohm bypass. Selection is via a convenient switch on the front baffle, easily accessible by removing the magnetic grille.
Electro-Voice EVID-P6.2W Pendant speaker 6.5″
AED1,535.00 inc. VAT -
The black Electro-Voice EVOLVE 30M Portable Column Sound System combines a powered subwoofer with a speaker array to create a lightweight, active PA setup designed to provide high-powered, wide-range frequency reproduction for sound engineers, presenters, and DJs in clubs, parties, concert venues, and live stage events. The integrated 8-channel mixer allows you and your band-mates to plug in 4 mic/line sources, 2 additional line sources, and a dedicated stereo Bluetooth input for streaming backing tracks or between-set incidental music. Additionally, channel 4 also includes a 1/4" Hi-Z input for guitar or bass without the need for a separate DI. The system consists of a 1000W internal amplifier which delivers 500W to the 10" subwoofer and 500W to the six 2.8" neodymium high-frequency drivers, which combine for a frequency response of 51 Hz to 20 kHz with a max SPL of 123 dB.
Electro-Voice Evolve-30M Portable Column System Kit Black
AED7,489.00 inc. VAT -
The white Electro-Voice EVOLVE 30M Portable Column Sound System combines a powered subwoofer with a speaker array to create a lightweight, active PA setup designed to provide high-powered, wide-range frequency reproduction for sound engineers, presenters, and DJs in clubs, parties, concert venues, and live stage events. The integrated 8-channel mixer allows you and your band-mates to plug in 4 mic/line sources, 2 additional line sources, and a dedicated stereo Bluetooth input for streaming backing tracks or between-set incidental music. Additionally, channel 4 also includes a 1/4" Hi-Z input for guitar or bass without the need for a separate DI. The system consists of a 1000W internal amplifier which delivers 500W to the 10" subwoofer and 500W to the six 2.8" neodymium high-frequency drivers, which combine for a frequency response of 51 Hz to 20 kHz with a max SPL of 123 dB.
Electro-Voice Evolve-30M Portable Column System Kit White
AED7,450.00 inc. VAT -
This kit combines the Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer with the Evolve 50 Column Speaker to create a lightweight, active PA setup designed to provide high-powered, wide-range frequency reproduction for sound engineers, presenters, and DJs in clubs, parties, concert venues, and live stage events. The kit includes the powered subwoofer, magnetic speaker pole, column array speaker, power cord, and carry bag for the speaker pole and column array. The black Electro-Voice EVOLVE 50 Portable PA Column Array is part of the EVOLVE 50 portable PA system, which consists of a powered subwoofer, magnetic speaker pole, and the column array. The column array utilizes eight 3.5" neodymium drivers with a custom-designed waveguide, which provides consistent (120°) horizontal coverage. The column speaker array is powered by the subwoofer's integrated 1000W amplifier, which delivers 500W to the column array.
Electro-Voice Evolve-50 Portable Column System Kit Black
AED9,039.00 inc. VAT -
This kit combines the white Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer with the white Evolve 50 Column Speaker to create a lightweight, active PA setup designed to provide high-powered, wide-range frequency reproduction for sound engineers, presenters, and DJs in clubs, parties, concert venues, and live stage events. The kit includes the powered subwoofer, magnetic speaker pole, column array speaker, power cord, and carry bag for the speaker pole and column array.The white Electro-Voice EVOLVE 50 Portable 1000W Bluetooth-Enabled Subwoofer is part of the EVOLVE 50 portable PA system, which consists of a powered subwoofer, magnetic speaker pole, and a column array full-range speaker. The powered subwoofer utilizes a 12" driver and is powered by the integrated 1000W (500W to subwoofer) amplifier, which combines with the column array to provide a frequency response of 43 Hz to 20 kHz with a maximum SPL output of 127 dB.
Electro-Voice Evolve-50 Portable Column System Kit White
AED9,011.00 inc. VAT -
Bands, musicians, AV rental companies, DJs, and anyone looking for true professional audio performance in a super-compact and portable PA package will be thrilled by this kit, which combines the black Electro-Voice EVOLVE 50M Portable 1000W Subwoofer with the black Evolve 50 Column Speaker. The lightweight, active PA setup is designed to provide high-powered, wide-range frequency reproduction for sound engineers, presenters, and DJs in clubs, parties, concert venues, and live stage events. The kit includes the powered subwoofer, magnetic speaker pole, column array speaker, power cord, and carry bag for the speaker pole and column array.
Electro-Voice Evolve-50M Portable Column System Kit Black
AED11,253.00 inc. VAT -
Designed for musicians, bands, small venues, and rental houses, the black Electro Voice PXM-12MP 12" Powered Coaxial Monitor is a compact and versatile monitoring system that can be used as a floor wedge or as a mains PA. Placed on the ground, the floor wedge angles up 55° allowing musicians and performers to hear themselves without blocking sightlines. The enclosure also features a pole cup, which allows it to be mounted to a standard speaker stand and used as fills, delays, or a main PA system. With a dedicated subwoofer and the adjustable subwoofer matching LPFs of the PXM-12MP, a full 3-way system can be configured to create an extremely compact main PA.
Electro-Voice PXM-12, MP 12 700W Coaxial Multi Functional Powered Monitor Speaker
AED4,975.00 inc. VAT -
The Electro-Voice Sx300 is a 300-watt, 12-inch two-way, high-efficiency, constant-directivity compact speaker system with Ring-Mode Decoupling (RMDTM). Through the extensive use of computer-aided design and modeling, Electro-Voice engineers have developed a state-of-the-art professional loudspeaker system.
Electro-Voice SX-300 12″ 300W 2-Way Full Range Speaker.
AED3,305.00 inc. VAT -
The Tour X Series 12" Two-Way Full-Range Passive Loudspeaker from Electro-Voice is optimized for portable and fixed installation applications such as clubs, professional studios, and concerts. It features a high-sensitivity 12" SMX2120 woofer and a 1.25" 1.25" DH3/2010A titanium high-frequency compression driver. The speaker has a 500W continuous (2,000W peak) power handling capability to provide a strong, distortion-free performance. Constant-directivity waveguide provides a 90 x 50° coverage pattern. The high-frequency compression driver is protected by an advanced fourth-order crossover.
Electro-Voice TX-1122 12″ 500W 2-Way Full Range Speaker
AED4,269.00 inc. VAT -
The TX1152 PA speaker uses a DH3, high output 1.25″ titanium compression driver, coupled to a Constant Directivity 60 x 40 horn. This combination results in a smooth response to 20 kHz and excellent pattern control in medium throw applications. The SMX2151 15″ woofer has an FEA optimized magnet structure and a shorting ring for ultra low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.
Electro-Voice TX-1152 15″ 500W 2-Way Full Range Speaker
AED4,752.00 inc. VAT -
TX2152 utilizes the ND2, a high output 2-inch titanium compression driver, coupled to a Constant Directivity 60° x 40° horn. This combination results in excellent pattern control in medium throw applications. Dual SMX2151 15-inch woofers have FEA optimized magnet structures and shorting rings for ultra low distortion and maximum intelligibility at high SPL levels. The crossover uses very steep 36 dB/octave slopes with equalization for very smooth response in vocal range, and a protection circuit for long term reliability. The TX2152 has a variety of features that make it equally suited for portable or fixed installation applications. The internally braced, trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength and durability. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four way handles allow for gripping the TX2152 in a variety of positions. Six (6) M8 or six (6) 3/8-inch threaded points allow a single TX2152 to be suspended in a various positions in fixed installation applications. The recessed input panel with dual NL4 connectors keeps the connectors hidden and allows for closer placement to a wall or other boundary. The TX2152 is the same width and height as the TX2181, providing a single column appearance when stacked, and uses the minimum amount of space when stored or transported.
Electro-Voice TX-1181 18″ 500W Subwoofer
AED4,752.00 inc. VAT -
The black Electro-Voice ZLX-12BT is a compact and versatile 12" 2-way 1000W Bluetooth-enabled powered loudspeaker featuring custom engineered drivers in a rugged enclosure, well suited for rental houses, mobile entertainers, stage monitors, and more. A built-in Bluetooth receiver allows wireless music streaming from a mobile device or computer. The internal 1000W Class-D power amplifier drives the 12" woofer and 1.5" high-frequency titanium compression driver, which combine for a frequency response of 65 Hz to 18 kHz, and a maximum SPL of 126 dB. Two XLR-1/4" combo inputs, a 3.5mm aux input, and an XLR output accommodate typical connectivity with mixers, instruments, and more. Independent input/output gain controls and an LCD display with one-knob DSP control ensure efficient setup and signal adjustment. The sturdy polypropylene enclosure utilizes an EV-patented SST waveguide, and is covered by a powder-coated, 18-gauge steel grille. With its integrated pole cup, the ZLX-12BT can be mounted on a speaker stand, placed on a subwoofer pole, or can be used on its side as a floor wedge monitor. It includes an IEC power cable.
Electro-Voice ZLX-12BT 12″ 1000W 2-Way Full Range Powered Speaker
AED2,476.00 inc. VAT -
The black Electro-Voice ZLX-15BT is a compact and versatile 15" 2-way 1000W Bluetooth-enabled powered loudspeaker featuring custom engineered drivers in a rugged enclosure, well suited for rental houses, mobile entertainers, stage monitors, and more. A built-in Bluetooth receiver allows wireless music streaming from a mobile device or computer. The internal 1000W Class-D power amplifier drives the 15" woofer and 1.5" high-frequency titanium compression driver, which combine for a frequency response of 55 Hz to 18 kHz, and a maximum SPL of 127 dB.
Electro-Voice ZLX-15BT 15″ 1000W 2-Way Full Range Powered Speaker
AED2,926.00 inc. VAT -
The black Electro-Voice ZX3-90 is a 12" 2-way 600W passive loudspeaker offering high-performance, full-range sound reinforcement for installed applications in houses of worship, concert venues, arenas, and stadiums. Use it in your main PA system, expand your fills, or treat it as a floor monitor on stage. The ZX3-90's 12" woofer and neodymium/titanium high-frequency compression driver yield a 58 Hz to 15 kHz frequency response and boast a 600W continuous power handling rating (2400W peak). The high-frequency driver is mounted in a 90° x 50° horn for wide coverage or short distances.
Electro-Voice ZX-3-90B 12″ 600W 2-Way Full Range Speaker
AED5,039.00 inc. VAT -
The black Electro-Voice ZX4 is a 15" 2-way 400W passive loudspeaker offering full-range sound reinforcement for installed or portable applications in houses of worship, clubs, concert venues, and stadiums. Use it as your main PA system or treat it as a floor monitor on stage. The ZX4's 15" woofer and 1" titanium-diaphragm, high-frequency compression driver yield a 60 Hz to 20 kHz frequency response and boast a 400W continuous power handling rating (1600W peak). The high-frequency driver is mounted in a 90 x 50° horn for enhanced clarity and coverage control.
Electro-Voice ZX-4 15″ 400W 2-Way Full Range Speaker
AED4,958.10 inc. VAT -
The black Electro-Voice ZX5-90 is a 15" 2-way 600W passive loudspeaker offering high-performance, full-range sound reinforcement for installed applications in houses of worship, concert venues, arenas, and stadiums. Use it in your main PA system, expand your fills, or treat it as a floor monitor on stage. The ZX5-90's 15" woofer and neodymium/titanium high-frequency compression driver yield a 58 Hz to 18 kHz frequency response and boast a 600W continuous power handling rating (2400W peak). The high-frequency driver is mounted in a 90° x 50° horn for wide coverage or short distances.
Electro-Voice ZX-5-90B 15″ 600W 3-Way Full Range Speaker
AED5,611.00 inc. VAT -
Acoustically transparent fabric grille, mounts with integrated plastick studs.
Genelec 1032-409 Grille For 1032A- Black
AED198.45 inc. VAT -
The 1032-450B from Genelec is a stand plate that allows you to mount the 1032A or S30D monitor speakers to a floor stand. The plate has a standard 3/8" thread insert in the center, and offers 15 degrees of tilt. A rear press fit bar keeps the speaker cabinet securely on the plate.Designed for mounting the 1032A or S30D monitors to a floor standTiltable up to 15 degreesRear press fit bar for security
Genelec 1032-450B Stand Plate For 1032
AED631.05 inc. VAT -
The 1032-460B from Genelec is a wall mount for the 1032A or S30D monitor speakers. The mount offers 15 degrees of tilt and is adjustable for correct monitor positioning. A rear press fit bar keeps the speaker cabinet securely on the plate.Designed for mounting the 1032A or S30D monitors to a wallTiltable up to 15 degreesAdjustable for correct positioningRear press fit bar for security
Genelec 1032-460B Wall Mount For 1032 (S30D)
AED1,375.50 inc. VAT -
Acoustically transparent fabric grille, mounts with integrated plastick studs.
Genelec 1037-409 Grille For 1037A- Black
AED481.95 inc. VAT -
The Genelec Grill Cover is a high quality mesh speaker grill cover for 1038BPM monitors, sold individually, and requiring an order of two per pair of speakers.
Genelec 1038-409 Grille For 1238A- Black
AED728.70 inc. VAT -
This adapter is designed to use together with the floor stand model 8000-409B to support 1238CF monitors in lowered position. It’s not recommended to raise the stand in a higher position.
Compatible with:
- 1238CF
Width35 mmHeight12.5 mmGenelec 1038-605 Top Adapter 3/8″ For Floor Stand 8000-409B To Fit 1238Df
AED29.45 inc. VAT -
The Genelec-designed small and installation-friendly hybrid cable features power and signal in two isolated shield packed in the hybrid cable. Power is 3 x 0,85 mm2 and signal is double shielded 110 Ohm AES/EBU cable which can also handle analogue signal. 100m reels.
Genelec 1510-303B Hybrid Cable Black- 100 M Reels
AED1,008.53 inc. VAT -
Length: sold by the meter (price / meter). Signal conductors 2 x 7 x 0.20 mm AWG24 tinned copper (area 2 x 0.22 mm2). PE inner insulation (Foam-Skin-PE). AL / PETP protective film and PVC surface insulation. Power cables 3 x 19 x 0.24 mm AWG18 exposed copper (area 3 x 0.86 mm2). Power conductors have a common PVC insulation with signal conductors that can be split apart.
Genelec 1510-303W Hybrid Cable White- 100 M Reels
AED1,008.53 inc. VAT -
Installation friendly signal cable with shielded pair for balanced line level analog audio. Slimline white plastic jacket. 100m reel.
Genelec 1510-888 Installation Cable- 100 M Reels
AED444.47 inc. VAT -
The Cable Kit from Genelec includes two 4-pin Speakon cables and one CAT5 cable for the 1237APM & 1238APM monitors. Each cable is 33' long.
Genelec 1560-110 Ram-L Cable Kit 10 M
AED863.94 inc. VAT -
Galvanized steel bracket to be used for the enclosure mounting in thin wall materials.
Genelec 272-0030 Pre-Construction Bracket
AED64.05 inc. VAT -
Galvanized steel bracket to be used for the enclosure mounting in thin ceiling materials.
Genelec 272-0039 Pre-Construction Bracket
AED58.80 inc. VAT -
The Genelec 8000-410B is a fixed-position wall-mount bracket accessory for the 8030A active nearfield monitor, in a black finish. The bracket is also compatible and supplied with the 8020A monitor.
Genelec 4000-410B Wall Mount (Simple Bracket)- Black
AED52.50 inc. VAT -
Wall Mount Bracket 8X20 and 8X30 White
Genelec 4000-410W Wall Mount (Simple Bracket)- White
AED52.50 inc. VAT -
Exceptional sound meets compact dimensions. The 4010A offers the same clarity, reliability and adaptability as its larger 4000 series family members – but in a tiny footprint. Manufactured in Finland using certified sustainable methods, the 4010A blends premium performance with beautiful aesthetics. Its recycled aluminium enclosure delivers superb directivity and reduces reflections, which combine with onboard room compensation switches to produce precise, intelligible sound quality in even the most challenging acoustic spaces. The active design of the 4000 series removes the need for bulky external power amplifiers, since the amplifiers, crossover filters and protection circuitry are contained within the speaker cabinet itself. This not only ensures that the electronics and drivers are mutually optimised, but also reduces the need for racks of external amplifiers and associated cabling. And thanks to our extensive range of mounting accessories, the 4000 series can be installed quickly and conveniently in almost any location.
Genelec 4010AM Compact Two-Way Active Loudspeaker System in Black Painted Finish
AED1,513.00 inc. VAT -
Reference Amplified Diffuser for Home use with patented DCW anti-reflective aluminum construction; 2-way with dedicated Class D bass (25W) and treble (25W) amplifiers, 3 "Woofer and 34" Tweeter, Rear Bass Reflex, Frequency response (+/- 2.5dB) 74Hz-20Khz, Acoustic pressure at 1mt. 96dB, Crossover at 3KHz, Bass Adjustment from 0 to -4dB 3 Treble + 2dB, Balanced input on Phoenix / Euroblock terminals at 10Kohm with Pad at -10dB, ISS auto-off / on system with adjustable threshold, Consumption in the absence of 0 signal, 5W; 230VAC power supply, Ready for wall and VESA brackets, Complete with power supply cable and standard wall bracket; Dimensions: 181x121x116mm, Weight: 1.5Kg. White color
Genelec 4010AW Compact Two-Way Active Loudspeaker System in White Painted Finish
AED1,513.00 inc. VAT -
When space is at a premium, the 4020C is your compact, faithful friend. Designed for challenging commercial installations, the 4020C squeezes huge performance into a small package. With beautiful aesthetics and 120 RAL colour finishes, the 4020C delivers Genelec’s trademark precision and clarity, with controlled directivity and the ability to adapt to challenging acoustic environments via simple rear panel room compensation switches. This ensures clean, intelligible, non-fatiguing audio whatever the playback level, plus bulletproof 24/7 reliability as standard. The active design of the 4000 series removes the need for bulky external power amplifiers, since the amplifiers, crossover filters and protection circuitry are contained within the speaker cabinet itself. This not only ensures that the electronics and drivers are mutually optimised, but also reduces the need for racks of external amplifiers and associated cabling. And thanks to our extensive range of mounting accessories, the 4000 series can be installed quickly and conveniently in almost any location.
Genelec 4020CMM Compact Two-Way Active Loudspeaker System Black Painted Finish
AED2,109.00 inc. VAT -
Reference Amplified Diffuser for Home use with patented DCW anti-reflective aluminum construction; 2-way amplifier dedicated to bass from 50W and treble to 50W, 4 "Woofer and 34" Tweeter, Rear Bass Reflex, Frequency response (-3dB) 60Hz-21Khz, Acoustic pressure at 1mt. 96dB, Crossover at 3KHz, Bass Adjustment from 0 to -4dB 3 Acuri + 2dB, Balanced input on Phoenix terminals at 10Kohm with Pad at -10dB, ISS auto switch-off system with adjustable threshold, Consumption in the absence of signal 0.5W; 230VAC power supply, Ready for wall and VESA brackets, Complete with power supply cable and standard wall bracket; Dimensions: 226x151x142mm, Weight: 3.6Kg. Natural Aluminum Color.
Genelec 4020CRW Compact Two-Way Active Loudspeaker System in RAW Aluminium Finish
AED2,109.00 inc. VAT -
The compact and stylish Genelec 4020C active loudspeaker shares the same superior design with the Genelec 8000 Series monitors. Its controlled directivity allows the system to be easily installed in many types of acoustic environments, providing outstanding sound coverage. As an active loudspeaker, it contains drivers, power amplifiers, active crossover filters and protection circuitry. The 4020C is designed for indoor use only and features Genelec Intelligent Signal Sensing (ISS™) circuitry which switches the loudspeaker to standby when no audio input is detected (ErP 2013 Directive). Designer Tools and CAD Simulation Every building design and specification process is today done in conjunction with CAD/BIM software. The advantage of BIM software is that it enables evaluation and specification as early in the process as possible. BIM objects assist the designer/engineers in their work in a way that they become an integrated part of the BIM model (product model). Today CAD symbols are replaced by BIM objects. BIM objects still carry 2D and 3D presentations like a CAD symbol would, but they also carry so much more. BIM object products are visible in every drawing, visualisation and even bill of materials can be extracted from the BIM systems using ArchiCAD or Revit software.
Genelec 4020CWM Compact Two-Way Active Loudspeaker System in White Painted Finish
AED2,109.00 inc. VAT -
The compact 4030C offers crystal clear sound and round-the-clock reliability, making it the natural choice for small to medium-sized commercial installations. The active design of the 4000 series removes the need for bulky external power amplifiers, since the amplifiers, crossover filters and protection circuitry are contained within the speaker cabinet itself. This not only ensures that the electronics and drivers are mutually optimised, but also reduces the need for racks of external amplifiers and associated cabling.
Genelec 4030CM Compact Two-Way Active Loudspeaker System in Black Painted Finish
AED2,618.00 inc. VAT -
Reference Amplified Diffuser for Home use with patented DCW anti-reflective aluminum construction; 2-way with Class D amplifiers dedicated to bass (50W) and treble (50W), 5 "Woofer and 34" Tweeter, Rear Bass Reflex, Frequency response (+/- 2dB) 54Hz-20Khz, Acoustic pressure (peak) at 1mt. 110dB, Crossover at 3KHz, Bass Adjustment from 0 to -4dB 3 Acuri + 2dB, Balanced input on Phoenix terminals at 10Kohm with Pad at -10dB, ISS auto-off / on system with adjustable threshold, Consumption in the absence of signal 0.5W; 230VAC power supply, Ready for wall and VESA brackets, Complete with power supply cable and standard wall bracket; Dimensions: 285x189x178mm, Weight: 5.5Kg. Natural Aluminum Color
Genelec 4030CRW Compact Two-Way Active Loudspeaker System in RAW Aluminium Finish
AED2,618.00 inc. VAT -
The Genelec 4030CW is an active installation speaker for bars, restaurants, retail, meeting rooms or offices. The radiation is optimized for a wide listening zone and combines a natural, full and balanced sound with compact dimensions. The sturdy die-cast aluminum housing is provided with threaded holes. A large selection of suitable wall and ceiling brackets enable flexible installation. 120 RAL colors are available for adaptation to the respective environment. The two integrated Class-D power amplifiers are precisely matched to the drivers and guarantee distortion-free playback. If the playback level is too high, a protective circuit takes effect. The acoustic influences of an installation close to the wall can be compensated for via dip switches. The connection is made uncomplicated via a 3-pin Phoenix terminal. If there is no signal, the loudspeaker will automatically switch to standby mode if required.
Genelec 4030CW Compact Two-Way Active Loudspeaker System in White Painted Finish
AED2,618.00 inc. VAT -
Recycled-aluminium cabinet with tightly controlled directivity and minimum diffraction for excellent performance. Both drivers have metal protection grilles, with 165 mm (6.5 in) LF and 19 mm (3/4 in) HF transducers. Euroblock screw terminal for balanced input signal.
Genelec 4040AM Compact Two-Way Active Loudspeaker System in Black Painted Finish
AED4,421.55 inc. VAT
