Enjoy stereo sound from a variety of CD types with the Denon DCD-600NE CD Player. It uses a 192 kHz / 32-bit digital-to-analog converter for detailed audio reproduction from the stereo RCA analog output, and also features an optical output. The DCD-600NE will play CDs, CD-R/RWs, and MP3- and WMA-encoded discs.
Features
AL32 Processing
AL32 Processing is an analog waveform reproduction technology that utilizes data interpolation algorithms to add in the points that should exist before and after large quantities of data to smooth out the waveform and restore information lost during the digital recording. This is designed to produce detailed playback that’s free of interference, expressive in the lower range, and faithful to the original sound.
Supports CD, CD-R/RW, MP3, WMA, and USB Playback
Enjoy extended playback support for your high-resolution audio collection. The DCD-600NE can play standard CDs as well as CD-R/RWs in audio, MP3, and WMA format.
Short Circuit Paths
The circuit patterns of the DCD-600NE are engineered to make signal paths as short as possible, helping to reduce interference between circuits and the left and right channels, thereby minimizing the adverse influences on audio signals. This helps provide a clean audio output that’s transparent and faithful to the original recording.
Optical Output
The DCD-600NE features an optical output to connect to the digital input of your amplifier or receiver.
Pure Direct Mode
This mode deactivates the digital output and the display, which could otherwise color the signal to help output clean, detailed, accurate audio.
Direct Mechanical Ground Construction
The vibration-resistant design helps mitigate the adverse audio effects of heavy components within amplifiers. The power transformer is installed immediately above the insulators, near the foot, to mitigate unwanted vibration. In conjunction with a metal bracket connecting the CD mechanism and chassis to the feet, unwanted resonance from the rotation of the disc is also reduced for enhanced sound quality.
Auto Power Off Function
Auto Power Off helps you conserve energy by automatically powering the CD player off if it’s left unused for a set period of time.
Specification
Compatibility
| Supported Disc Types | CD, CD-R, CD-RW |
| Supported Formats | MP3, WMA |
General
| Frequency Response | 2 Hz to 20 kHz |
| DAC | 192 kHz / 32-Bit |
| Dynamic Range | 101 dB |
| Signal to Noise Ratio | 112 dB |
| Max Sample Rate/Resolution | 44.1 kHz |
| Total Harmonic Distortion (THD) | 0.003% |
| Number of Channels | 2 |
Connections
| Audio Outputs | 1 x RCA Stereo (L/R) 1 x TOSLINK Optical |
| Audio Inputs | None |
| Other I/O | 1 x 1/8″ / 3.5 mm (IR) Input 1 x 1/8″ / 3.5 mm (IR) Output |
Reviews
There are no reviews yet.