Brand |
---|
Lab Gruppen FAD602 2 x 60W Commercial Amplifier with Direct Drive Technology, Dante Networking and Energy Star Certification
Brand: Lab GruppenAED2,587.20 inc. VAT
Available in stock
2 x 60 Watt dual-channel Amplifier provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. Capable of delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme flexibility on every channel. FAD602 is easy to install and operate – even for non-technical personnel. Simply put, the FAD602 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.
Description
2 x 60 Watt dual-channel Amplifier provides the perfect solution for commercial and industrial applications requiring great sounding distributed audio coupled with power conservation and reduced operating expense. Capable of delivering high-quality sound over both Low-Z (4/8 Ohm) and High-Z (70/100 V) loudspeaker configurations offering extreme flexibility on every channel. FAD602 is easy to install and operate – even for non-technical personnel. Simply put, the FAD602 is ideal-suited for bars & restaurants, retail destinations, hotels, corporate, education or other venues needing background music and/or a public address system.
Features
- 2 x 60 Watt amplifier for commercial and industrial applications
- Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter
- Direct drive, constant power technology for superior audio performance and reliability
- Dante* audio connectivity to enable creating large audio systems over a local network
- Energy Star* certified design conserves energy and drastically reduces operational cost
- GPI remote volume control using standard RJ-45 connector and Ethernet cable
- Auto Ramp circuitry for quiet and fast power up/down enables real-world energy savings
- Tamperproof gain controls for each channel on rear panel location
- Rack-mountable 1U, half-rack width enclosure with joining brackets for rack, table and wall mounting
- Euroblock type amplifier output connectors
- Convection-cooled, fan-less amplifier technology for low noise
- Comprehensive fail safe circuit protection ensures continued operation
Specifications
Maximum Output Power
4 or 8 Ω per channel |
60 W |
Number of Ouput Channels
Number |
2 |
Minimun Load Impedance
4 Ω mode |
4 Ω |
8 Ω mode |
8 Ω |
70 V output mode |
82 Ω |
100 V output mode |
166 Ω |
Controls
Front |
N/A |
Rear |
Gain control, load config (4 Ω / 8 Ω / 70 V / 100 V), high-pass filter switch, reset button) |
Indicators
Front | |
Power |
On (blue), standby (yellow) |
Limit (red LED), per channel |
-0.5 dBFS (digital) |
Signal (green LED), per channel |
> -63 dBFS (digital) |
Fault (red LED) |
Overheat, DC fault, over current etc |
Rear | |
Dante |
Indentify (yellow), clock sync (white) |
System
Input transmission type |
Dante, 2 channels Rx |
Input connectivity |
1 x RJ45 Ethernet connector, 1-port 100 Mbps to Dante interface |
Input sensitivty |
-2 dBFS (digital) |
Maximum input level |
0 dBFS (digital) |
Outputs connectivity |
1 x 4-pin 5.08 mm Euroblock connector |
Output circuit type |
Class D |
Remote connector |
2 x RJ45 Ethernet connector |
Performance
Distortion,1/8 rated power |
<0.1% |
Frequency response |
20 Hz to 20 kHz, +0/-1.5 dB |
Crosstalk |
>72 dB |
Signal-to-noise |
>101 dBA |
High-pass filter |
80 Hz HPF |
Circuit Protection
Cooling |
Convection-cooled, fanless |
Amplifier protection |
Thermal protection, over current protection, DC protection, high frequency protection |
Load protection |
Controlled start and shutdown behaviour, DC-fault protection |
Power Supply, Voltage (Fuse)
Main voltage |
100-240 V~, 50/60 Hz with active power factor correction |
Power consumption 1/8th rated power @ 4 Ω |
50 W |
Mains connector |
Standard IEC connector |
Dimensions / Weight
Dimensions (H x W x D) |
44 x 218 x 280 mm (1.7 x 8.6 x 11″) |
Weight |
2.6 kg (5.7 lbs) |
Finish |
Brushed black anodized aluminum chassis with black painted steel bottom |
Approvals |
CE, WEEE, cTUVus, PSE, RCM, RoHS, FCC part 15 Class B, Energy Star 3.0 |
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.