-
The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of EON710's is well equipped to cover an audience of 250. A push button and LCD menu screen on the back of the speaker allow you to physically switch between optimized use-case presets. The built-in DSP provides user control over the 3-channel mixer and the integrated dbx DriveRack, which offers Automatic Feedback Suppression (AFS), an 8-band output EQ, microphone ducking, and a 100ms speaker delay. Two inputs (Ch.1 and Ch.2) feature combo XLR-1/4" connectors complete with gain controls and signal/clip indicators. The third channel is the Bluetooth 5.0 input for wireless audio streaming.JBL EON710 Two-Way 10″ 1300W Powered Portable PA Speaker with Bluetooth and DSP
AED2,670.00 inc. VAT -
Designed to deliver professional-quality audio, the 12" JBL EON712 is a highly flexible, easy to use, 1300W powered portable PA speaker for today's working musicians, singer/songwriters, mobile DJs, and other sound providers. The speaker works in a variety of orientations and configurations for use as a main PA or stage monitor. When used as a main speaker, a pair of EON712's is well equipped to cover an audience of 300. A push button and LCD menu screen on the back of the speaker allow you to physically switch between optimized use-case presets. The built-in DSP provides user control over the 3-channel mixer and the integrated dbx DriveRack, which offers Automatic Feedback Suppression (AFS), an 8-band output EQ, microphone ducking, and a 100ms speaker delay. The highly efficient 1300W amplifier powers the 12" woofer and 1" compression driver, which provide full-range audio (60 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. JBLs redesigned high-frequency horn ensures a uniform coverage front to back with a dispersion of 100°H x 60°V. The EON712 includes a power cord.JBL EON712 Two-Way 12″ 1300W Powered Portable PA Speaker with Bluetooth and DSP
AED2,819.25 inc. VAT -
The IRX112BT features 4 x "real-world" EQs to let you dial-in an optimal tone quickly and efficiently. The built-in dbx AFS feedback suppression ensures your vocals or speech sound as loud and clear as possible. Other notable features include 1-touch ducking, which automatically lowers the music volume when speech input is detected, and a bass-boost circuit for pumping up the low end at your next party. The rear panel provides 2-channel mic/line inputs, each with combo XLR-1/4" connectors, as well as an XLR thru to connect additional speakers. Bluetooth 5.0 audio streaming lets you play backing tracks, video soundtracks, or recorded music between sets. It's possible to link 2 speakers to create a true stereo image.JBL IRX112BT Compact Powered 12″ Portable Speaker with Bluetooth
AED2,215.00 inc. VAT -
The JRX215 from JBL is a two-way 15" loudspeaker system. It is suitable for live sound and speech reinforcement applications. It features a 2.5" voice coil and a 1" compression driver, as well as a frequency response of 59 Hz to 13 kHz. Its high-frequency driver is protected by a SonicGuard system, while the speaker's overall MDF construction allows for both durability and a suitable low-frequency response. With its non-resonant steel handles, the speaker is portable, even at a weight of 60.5 lb. For connections, this loudspeaker sports 1/4" TS and Neutrik SpeakON terminations.JBL JRX215 15″ Two-Way Sound Reinforcement Loudspeaker System
AED1,791.00 inc. VAT -
The JBL JRX218SD passive PA subwoofer gives you reliable operation, rugged construction, and thoroughly professional performance, all at an amazingly affordable price. JBL engineers reexamined every element of the speaker system design, kept everything that makes a speaker perform and sound its best, and redesigned things that don't. The JRX218S sports a massive JBL 18" woofer with a cast frame and 3" voice coil. Power handling is rated at a robust 350 watts continuous and 1400 peak. For serious low end performance without breaking the bank, take the stage with JBL's JRX218S.JBL JRX218SD 18″ Compact Subwoofer Woofer with a Cast Frame and 3″ Voice-Coil – Black
AED2,204.00 inc. VAT -
JBL-LCT 81C/TM is a full-range ceiling speaker designed to lay into a 600 mm x 600 mm metric suspended grid ceiling, with no cutting of ceiling tiles required, making for an easy and cost-effective installation with a minimum of mess. The low profile depth of only 103 mm (4.1 in) allows the speaker to fit in locations where deeper loudspeakers do not. This loudspeaker is designed to provide excellent performance for voice reinforcement and light-to-medium music in a wide variety of applications, including education classrooms, business music systems, retail stores, music/paging systems, airports, reception/waiting rooms, lounges, courtrooms, meeting rooms, and more. The very high sensitivity of 96 dB provides maximum sound level, even at low tap settings. JBL-LCT 81C/TM includes a 200 mm (8 in) dual-cone driver with a very high 96 dB sensitivity. The driver features a 25 mm (1 in) diameter voice coil with a Kapton coil-former and high-temperature wire for better power dissipation and long-term reliability. The speaker's built-in 10 Watt transformer provides versatility by allowing use on 100V or 70V distributed loudspeaker lines, as well as at 8 ohms (low impedance) for driving directly from a low impedance power amplifier. Adjusting is convenient via a rotary switch on the side of the rear enclosure. Two safety seismic attachment tabs are provided for securing to ceiling deck, plus 4 holes are provided -- one in each corner. The color of the perforated grille is white.JBL LCT 81C/TM Low-Profile Lay-In 2 x 2′ Ceiling Tile Loudspeaker (White) – 1Pcs Single
AED635.25 inc. VAT -
Features
GeneralColor Black AV FurnitureType Mounting kit Mounting Components Top bracket, bottom bracket Recommended Use Speaker(s) JBL MTC-CBT-SUS3-WH Suspension Bracket Kit for CBT Speakers (White)
AED215.25 inc. VAT -
The JBL® CSMA series of Mixer-Amplifiers are a professional tool with a sleek industrial look that is designed and built for commercial sound applications. Utilizing Crown’s DriveCore technology enables significantly reduced size and weight – all mixer/amps are highly efficient, fanless and just 1U rack space high. There are both single channel and two channel models with four or eight mixer channels, respectively.
The CSMA mixer/amps offer unmatched ease of use, with a clean, front panel featuring only volume controls for each channel, master volume adjustment, adjustable bass and treble controls and a power switch. All the volume controls are surrounded by an illuminated ring, making them easy to see and operate in darkened environments. The amplifier can drive 8 ohm and 4 ohm loads and can be used with 70V and 100V distributed audio systems without the need for a separate transformer. In addition to balanced mic/line inputs, unbalanced RCA inputs and speaker connections, all units include RJ45 connectors for use with JBL CSR-V in-wall volume controls. All models feature a universal power supply which enables the ability to accept AC voltages from 100 to 240 VAC, 50/60Hz.
JBL Commercial mixer/amps are manufactured under HARMAN’s GreenEdge™ environmental initiative, conforming to lead-free RoHS standards and utilizing recycled copper, aluminum and steel, an energy-saving powder coat finishing process and other environmentally-conscious manufacturing processes. Their highly efficient DriveCore design reduces power consumption and yields much more efficient operation – up to 80 percent more efficient than previous designs. All models carry a 3-year no-fault transferable warranty.
Features
- 8 inputs with 2 outputs of 40,80, 120-watts of power
- Ideal for commercial and industrial use
- Fanless, space-saving 1U design
- Sleek industrial look with illuminated rings, making them easy to see and operate
- Euro-block type mic/line input connectors and output connectors
- Independent Bass and Treble controls for each output channel
- Supports 70V and 100V distributed audio systems without the need for a separate transformer
- Remote volume control capability using JBL CSR-V module and standard Ethernet cable
- Priority muting
- Configurable output routing
- Utilizes Crown’s DriveCoreTM technology providing excellent audio performance with high efficiency
- Manufactured to lead-free ROHS standards, utilizing recycled metals, and using an energy-saving powder coat process
- Includes rack mounting kit
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment
- Energy Star® Certified
Specifications
Output 120W @ 4/8 Ohms (1kHz Power, THD+N<0.5%) Frequency Response +/- 1dB (@1W into 4 or 8 Ohms) Load Impedance Stable from 2 – 16 Ohms Sensitivity 1.4Vrms Signal to Noise Ratio -weighted Input Impedance Balanced 20K Ohms/Unbalanced 10K Ohms Max Input +20dBu Typical Dimensions 1.7″ x 17.2″ x 11.9″ (43.3 mm x 436.9 mm x 303.4 mm) Shipping Weight 240: 13.9 lbs (6.3 kg); 280: 15.2 lbs (6.9 kg); 2120: 15.5 lbs (7.0 kg) JBL NCSMA240-U-EU 8 input 1 x 40W DriveCore Mixer-Amp
AED3,438.75 inc. VAT -
The splashproof Party Box 710 transforms your next event into a real party, concert or nightclub. With its unique and colorful light show synced to JBL Original Pro Sound. Minimalistic and intuitive top panel controls and the PartyBox App let you create next-level musical and visual experiences. Customizing both the flashing, strobe lights and the amazing sound from the dual set of tweeters and bass-rich woofers. One button True Wireless Sound instantly pairs two Party Box 710s for an even bigger crowd. And with an easy-to-grip handle and robust wheels, you can keep the good times rolling wherever the party goesJBL Partybox 710 Party Speaker with 800W RMS Powerful Sound, Built In Lights and Splash proof Design
AED2,844.00 inc. VAT -
The black JBL AWC129 is a single all-weather passive coaxial loudspeaker designed for high-output, full-range sound reinforcement in various indoor and outdoor applications such as sports facilities, stadiums, fairgrounds, cruise ships, and background music/paging systems.Capable of up to 400W long-term power handling, it incorporates a 12" Kevlar-reinforced woofer and a 1" fluid-cooled high-frequency driver to produce a high maximum peak SPL of 128 dB and a wide frequency response of 55 Hz to 20 kHz (-10 dB). The coaxial speaker configuration yields a 90 by 90° dispersion pattern for consistent coverage. The paintable ABS enclosure boasts an IP56 rating for effective weather resistance and a sturdy steel grille backed with open-cell foam for additional protection. An integrated multi-tap transformer—configurable via a rear-panel tap selector—allows operation in 70/100V systems or 8-ohm low-impedance setups. A color-matched U-bracket is included for ease of installation.JBL Professional AWC129 All-Weather 12″ 2-Way 400W Passive Coaxial Loudspeaker (Single, Black)
AED5,693.99 inc. VAT -
The black JBL AWC129 is a single all-weather passive coaxial loudspeaker designed for high-output, full-range sound reinforcement in various indoor and outdoor applications such as sports facilities, stadiums, fairgrounds, cruise ships, and background music/paging systems.Capable of up to 400W long-term power handling, it incorporates a 12" Kevlar-reinforced woofer and a 1" fluid-cooled high-frequency driver to produce a high maximum peak SPL of 128 dB and a wide frequency response of 55 Hz to 20 kHz (-10 dB). The coaxial speaker configuration yields a 90 by 90° dispersion pattern for consistent coverage. The paintable ABS enclosure boasts an IP56 rating for effective weather resistance and a sturdy steel grille backed with open-cell foam for additional protection. An integrated multi-tap transformer—configurable via a rear-panel tap selector—allows operation in 70/100V systems or 8-ohm low-impedance setups. A color-matched U-bracket is included for ease of installation.JBL Professional AWC129 All-Weather 12″ 2-Way 400W Passive Coaxial Loudspeaker (Single, Gray)
AED5,693.99 inc. VAT -
The Control® 25-1 is a two-way 5” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.JBL Professional Control 25-1 Compact Indoor/Outdoor Background/Foreground Speaker, Black – Single
AED1,107.00 inc. VAT -
The Control® 28-1 is a two-way 8” speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors, This makes Control 28-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.JBL Professional Control 28-1 High Output Indoor/Outdoor Background/Foreground Speaker, Black – Single
AED1,774.00 inc. VAT -
The JBL Gas Assist Speaker Tripod (3'8" to 6'7") is designed for supporting JBL JRX200, PRX400, STX800, EONH, PRX700, and VRX900 speaker models. The stand uses an internal air-powered shock to assist in lifting the PA speaker to an adjustable height between 3'8" and 6'7" off the ground.JBL Professional JBLTRIPOD-GA Speaker Tripod Featuring Gas Assist Adjustment from 3′ 8′ to 6′ 7′ – Black
AED1,148.00 inc. VAT -
A 2000W peak Class-D amplifier drives the 12" woofer and 1.5" compression driver, which combine to offer a frequency range of 65 Hz to 17 kHz (-3 dB) with a 132 dB maximum SPL output. The built-in Bluetooth offers wireless control of the system from anywhere in the venue, using the free Pro Connect app for iOS and Android devices. The app controls levels, parametric EQ, user presets, and up to 180ms of user-defined delay to fine-tune your setup.JBL Professional PRX912 Two-Way 12″ 2000W Powered PA System / Floor Monitor with Bluetooth Control
AED5,712.00 inc. VAT -
The JBL SRX815P 15" Two-Way Bass Reflex Self Powered System is suitable for live performance, mobile and fixed DJ, sound system rental, touring, and permanent installation applications. Using JBL Premium Transducers, 2000W peak of Crown Class-D Drivecore Amplification, and a full user configurable DSP system with HiQnet network control (via Ethercon connection to third party router) and 50 JBL engineered application presets, the system can deliver a frequency response of 44 to 20,000 Hz (-3 dB) (-3 dB) and a maximum SPL of 137 dB.
The rear panel of the speaker features a power button with LED indicator, a pair of balanced XLR/TRS combo input connectors, an LCD display screen with master encoder knob and back button for accessing presets, a pair of XLR-3M output connectors for sending to additional speakers, an XLR-3M mix output connector for sending audio out to an external source, and an Ethercon connector with LINK and DATA for network control via standard Ethernet cable to a third party router for iOS and Android mobile remote control.
JBL Professional SRX815P 15″ Two-Way Bass Reflex Self Powered System
AED9,152.82 inc. VAT -
Audio professionals looking to ground-stack a SRX900 Series line array will need the JBL Base Plate for SRX906LA Arrays. The base plate is a universal adapter frame that allows up to six SRX906LA arrays to be ground stacked atop of compatible subwoofers or support structures such as scaffolding, stages, or carts.JBL Professional SRX906LA BP Base Plate for SRX906LA
AED3,453.33 inc. VAT -
The SRX900 Series embodies the advanced performance principles that drive JBL's development of audio products that make a real difference in the world of professional audio. This next-generation family of powered line arrays and subwoofers addresses the growing need for scalable small and medium-format professional sound-reinforcement solutions for rental companies, fixed installations and musicians seeking the ultimate combination of performance and portability. The SRX906LA is a compact, two-way, active line array element that can cover a variety of small- to mid-sized applications, including rental houses, touring artists, DJs, and installations. Built-in DSP and amplification offer a plug and play experience while providing consisten¬cy and optimum performance anywhere in the world.JBL Professional SRX906LA Dual 6.5-inch Powered Line Array Loudspeaker
AED12,355.00 inc. VAT -
The SRX900 Series embodies the advanced performance principles that drive JBL's development of audio products that make a real difference in the world of professional audio. This next-generation family of powered line arrays and subwoofers addresses the growing need for scalable small and medium-format professional sound-reinforcement solutions for rental companies, fixed installations and musicians seeking the ultimate combination of performance and portability. The SRX910LA is a two-way active line array element that can cover a variety of mid to large-sized applications, including rental houses, touring artists, DJs, and installations. Built-in DSP and amplification offer a plug and play experience while providing consistency and optimum performance anywhere in the world.JBL Professional SRX910LA Dual 10-inch Powered Line Array Loudspeaker
AED18,419.99 inc. VAT -
The SRX918S is a single 18-inch active subwoofer designed to complement SRX900 Series full-range sound reinforcement systems. The subwoofer houses a JBL 2279-1 18-inch woofer featuring Differential Drive® – JBL’s dual voice coil, dual gap technology – to deliver better heat dissipation, lower power compression, and wider dynamic range than conventional single-coil designs.JBL Professional SRX918S 18-inch Powered Subwoofer
AED15,108.33 inc. VAT -
Protect your subwoofer from on-the-road wear and tear with the JBL Cover for SRX918S, a heavy-duty soft cover that's custom designed to fit the SRX918S subwoofer. The front panel has been internally reinforced for maximum protection of the speaker grilles. When not in use, the cover folds into a compact footprint for easy storage.JBL Professional SRX918S CVR Cover for SRX918S
AED863.33 inc. VAT -
The SRX928S is a dual 18-inch active subwoofer designed to complement SRX900 full-range sound reinforcement systems. The sub¬woofer houses two JBL 2279-1 18-inch woofers, featuring Differential Drive® – JBL’s dual voice coil, dual gap technology – to deliver better heat dissipation, lower power compression, and wider dynamic range than conventional single-coil designs.JBL Professional SRX928S Dual 18-inch Powered Subwoofer
AED19,970.00 inc. VAT -
The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.JBL Professional VRX918SP 18 inches High Power Powered Flying Subwoofer
AED11,006.92 inc. VAT -
While intended for smaller venues than the VerTec series, the VRX932LAP Active Constant Curvature Line Array is designed and built to the same high standards and uses the same advanced, concert-proven drivers. The VRX932LAP delivers extraordinary clarity, flexibility and, of course, stunning JBL sound in an attractive, easy to handle, and affordable package. The VRX932LAP is a perfect fit for medium-sized venues that don't want to sacrifice sound quality just because they're not as big as other professional facilities. For compact power, it's the VRX932LAP.JBL Professional VRX932LAP 1750W 12 inch Powered Line Array Speaker
AED15,732.70 inc. VAT -
The PRX425 Two-Way Dual 15" Passive Speaker by JBL is a powerful option for touring or installed FOH mains. The PRX425 houses dual 15" woofers and a 1" polymer diaphragm compression driver for 600W of continuous power capacity. The compression driver is mounted to a 90 x 50° horn, providing even coverage. The 90° coverage angle is wide enough to provide coverage of an audience when used one-per-side, yet narrow enough to allow splaying of multiple enclosures without excessive coverage overlap.
JBL PRX425 Two-Way Dual 15″ Passive Speaker
AED3,660.00 inc. VAT -
Audio professionals looking for a compact, versatile powered PA system and floor monitor will be impressed by the JBL PRX915 a 2-way, active loudspeaker designed for main PA and monitor applications with extensive Bluetooth control over the onboard DSP. Well suited for event halls, bands, DJ systems, clubs, bars, schools, and churches, the speaker is optimized for full-range sound reinforcement or floor monitor applications. With its dual-socket pole mount, the PRX915 is designed to match the PRX915XLF and PRX918XLF subwoofers (separately sold), offering a high-performance, self-powered sub/satellite system. A 2000W peak Class-D amplifier drives the 15" woofer and 1.5" compression driver, which combine to offer a frequency range of 60 Hz to 16 kHz (-3 dB) with a 133 dB maximum SPL output. The built-in Bluetooth offers wireless control of the system from anywhere in the venue using the free Pro Connect app for iOS and Android devices. The app controls levels, parametric EQ, user presets, and up to 180ms of user-defined delay to fine-tune your setup.JBL PRX915 Two-Way 15″ 2000W Powered PA System / Floor Monitor with Bluetooth Control
AED6,859.00 inc. VAT -
The passive JBL SCS 12 is a two-way spatially cued cinema ceiling surround speaker designed for ceiling surround applications in immersive systems. The speaker requires a 400W peak amplifier to drive the coaxial 12" woofer and 1" compression driver, which combine to provide a frequency range of 55 Hz to 20 kHz (±3) with a peak SPL of 128 dB at 3.3'.
Component features include a Kevlar-reinforced low-frequency cone for reliability, a well-damped surround edge for smooth frequency response, a high-temperature 3" voice coil, and reduced distortion through saturated-gap magnet geometry. The high-frequency compression driver features a patented, high-temperature polymer diaphragm with fluid cooling for high output levels and low distortion. The thick ABS and fiberglass enclosure are heavily braced to maximize low-frequency performance. The JBL SCS 12 includes a heavy-duty U-type mounting bracket.JBL SCS 12 Two-Way Spatially Cued Cinema Ceiling Passive Surround Loudspeaker
AED4,925.45 inc. VAT -
The SCS 8 is a coaxial-driver, 2-way, full-range cinema surround loudspeaker, ideal for multi-channel surround formats and is designed for overhead installation as well as for standard on-wall installations.
JBL SCS8 Spatially-Cued Surround 2-Way Coaxial Loudspeaker with 8″ Woofer
AED3,370.43 inc. VAT -
The JBL Professional SRX812 - 12" Two-Way Bass Reflex Passive System is designed for use as a light-duty main PA, monitor, or rear or side fill. Featuring M10 suspension points and feet for both floor-standing and monitor use, the speaker is suitable for musicians, bands, and DJs, concert use, public speaking, or installations such as performance venues, corporate spaces, educational facilities or houses of worship. Tunings and presets are available for Crown ITech HD and XTI 2 amps as well as the dbx VENU360 signal processor.
JBL SRX812 – 12″ Two-Way Bass Reflex Passive System
AED4,525.00 inc. VAT -
SRX818S is a single 18” subwoofer for concert, touring, or installed use. Featuring a standard M20 pole cup for use with top boxes, indexing feet for stacking in both the standard and cardioid position, and a 136dB max SPL, the SRX818S is an ideal solution for musicians, bands, and DJs, concert use, public speaking, or installations such as performance venues, corporate spaces, educational facilities or houses of worship. Tunings and presets are available for Crown ITech HD.JBL SRX818S 18″ Passive Subwoofer System
AED6,277.00 inc. VAT -
The JBL Professional SRX828S - Dual-18" Passive Subwoofer System is designed for concert, touring, or installed applications. With indexed feet for stacking in both standard and cardioid positions, 4800W peak-power handling, and a maximum SPL of 141 dB, the subwoofer is suitable for musicians, bands, DJs, PA, performance venues, corporate spaces, houses of worship, and more. The wide stance of the subwoofer is suitable for splaying top boxes. A variety of tunings and presets is available for Crown ITech HD and XTI 2 amps as well as the dbx VENU360 signal processor.
JBL SRX828S – Dual-18″ Passive Subwoofer System
AED8,475.00 inc. VAT -
The SRX900 RC1 is a universal rain cover used for protecting SRX900 amplifier modules from moisture. The rain cover attaches to the amplifier module using the five included M3.5 fasteners and covers the LCD, XLR and etherrCON® connectors. A Velcro feature allows easy access to the LCD and connectors, while cover’s flexible material allows it to drape around the connected cables. Once attached, the RC1 is designed to remain on the product; it does not need to be removed for indoor applications. The RC1 should always be used when SRX900 products are used outdoors. Note that the Neutrik powerCON® TRUE1®TOP power connectors are IP65 rated, and do not need to be covered for outdoors use. For more information on how to attach the RC1, refer to the SRX900 Series Rigging and User
JBL SRX900 RC1 Rain Cover, compatible with all SRX900 models
AED259.00 inc. VAT -
Owners of the SRX900 Series line array speaker elements who require more down-tilt when flying their systems will need the JBL Pull-Back Accessory, a steel bracket and 1/2" shackle that can support up to 16 SRX906LA or 16 SRX910LA enclosures. The bracket and shackle attach to the bottom cabinet and connects to a rear center suspension point.
JBL SRX900LA PB Pull-Back Accessory for SRX900 Line Arrays
AED647.50 inc. VAT -
Audio professionals in need of a lightweight and compact rigging system for the SRX900 Series line array will need the JBL Array Frame for SRX906LA. The frame is designed to work with single-point and front-back suspensions methods. For single-point applications, the array frame can be used in conjunction with the VTX RC500 rotating clamp, which allows smaller SRX906LA arrays to be suspended from standard size trusses or pipes.
JBL SRX906LA AF Array Frame for SRX906LA
AED5,180.00 inc. VAT -
Audio professionals in need of a lightweight and compact rigging system for the SRX900 Series line array will need the JBL Array Frame for SRX906LA. The frame is designed to work with single-point and front-back suspensions methods. For single-point applications, the array frame can be used in conjunction with the VTX RC500 rotating clamp, which allows smaller SRX906LA arrays to be suspended from standard size trusses or pipes.
JBL SRX906LA AF Array Frame for SRX906LA
AED5,180.00 inc. VAT -
Audio professionals looking for an easy way to protect and transport up to four SRX906LA line array elements will need the JBL Flight Case. The truck-pack-friendly case features a base unit with four heavy-duty casters and a hard cover that slides over the top. The built-in stacking features keep the four speaker elements in place and allows for quick deployment and breakdown. The flight case features a rugged, impact-resistant DuraFlex finish.
JBL SRX906LA CASE Flight Case for (4) SRX906LA
AED6,043.34 inc. VAT -
Audio professionals looking for an easy way to protect and transport up to four SRX906LA line array elements will need the JBL Flight Case. The truck-pack-friendly case features a base unit with four heavy-duty casters and a hard cover that slides over the top. The built-in stacking features keep the four speaker elements in place and allows for quick deployment and breakdown. The flight case features a rugged, impact-resistant DuraFlex finish.
JBL SRX906LA CASE Flight Case for (4) SRX906LA
AED6,043.34 inc. VAT -
Audio professionals looking for an easy way to protect and transport up to four SRX910LA line array elements will need the JBL Vertical Transporter. The truck-pack-friendly transport cart features a base unit with four heavy-duty casters and a hard top (VT TOP) attachment that connects to the top cabinet of a stack to create a robust and defined footprint for stabilization during transport. Additionally, the VT TOP allows other gear to be stacked on top for maximum truck-pack efficiency. The integrated wheel cups at the top of the VT allow stacking for storage. For additional protection, the SRX910LA VT CVR reinforced cover is available separately.
JBL SRX906LA VT Vertical Transporter for SRX910LA
AED5,611.66 inc. VAT -
Audio professionals looking for an easy way to protect and transport up to four SRX910LA line array elements will need the JBL Vertical Transporter. The truck-pack-friendly transport cart features a base unit with four heavy-duty casters and a hard top (VT TOP) attachment that connects to the top cabinet of a stack to create a robust and defined footprint for stabilization during transport. Additionally, the VT TOP allows other gear to be stacked on top for maximum truck-pack efficiency. The integrated wheel cups at the top of the VT allow stacking for storage. For additional protection, the SRX910LA VT CVR reinforced cover is available separately.
JBL SRX906LA VT Vertical Transporter for SRX910LA
AED5,611.66 inc. VAT -
Audio professionals in need of a lightweight and compact rigging system for the SRX900 Series line array will need the JBL Array Frame for SRX910LA. The frame is designed to work with single-point and front-back suspensions methods. For single-point applications, the array frame can be used in conjunction with the VTX RC500 rotating clamp, which allows smaller SRX906LA arrays to be suspended from standard size trusses or pipes.
JBL SRX910LA AF Array Frame for SRX910LA
AED6,906.67 inc. VAT -
Audio professionals looking to ground-stack a SRX900 Series line array will need the JBL Base Plate for SRX910LA Arrays. The base plate is a universal adapter frame that allows up to four SRX910LA arrays to be ground stacked atop of compatible subwoofers or support structures such as scaffolding, stages, or carts. The rear angle selection bar allows for angles ranging from -15 to +5°. Additionally, the three included M10 through-holes can be used to permanently attach an SRX910LA array to other support structures.
JBL SRX910LA BP Base Plate for SRX910LA
AED4,316.67 inc. VAT -
The SRX900 Series embodies the advanced performance principles that drive JBL's development of audio products that make a real difference in the world of professional audio. This next-generation family of powered line arrays and subwoofers addresses the growing need for scalable small and medium-format professional sound-reinforcement solutions for rental companies, fixed installations and musicians seeking the ultimate combination of performance and portability. The SRX910LA is a two-way active line array element that can cover a variety of mid to large-sized applications, including rental houses, touring artists, DJs, and installations. Built-in DSP and amplification offer a plug and play experience while providing consistency and optimum performance anywhere in the world.
JBL SRX910LA Dual 10-inch Powered Line Array Loudspeaker
AED23,741.67 inc. VAT -
Audio professionals utilizing the vertical transporter for the SRX910LA line array speakers who need additional protection from the elements will want the JBL Cover for SRX910LA Vertical Transporter. The heavy-duty soft cover is sized to cover four SRX910LA array elements and includes two industrial-rated zippers for fast and reliable deployment. The cover includes input panel flaps, which allow the SRX enclosures to be tested without removing the cover. The front section of the cover has reinforced panels for maximum protection of the speaker grilles. The cover folds up for compact storage.
JBL SRX910LA VT CVR Vertical Transporter Cover for (4) SRX910LA
AED1,726.66 inc. VAT -
Audio professionals utilizing the vertical transporter for the SRX910LA line array speakers who need additional protection from the elements will want the JBL Cover for SRX910LA Vertical Transporter. The heavy-duty soft cover is sized to cover four SRX910LA array elements and includes two industrial-rated zippers for fast and reliable deployment. The cover includes input panel flaps, which allow the SRX enclosures to be tested without removing the cover. The front section of the cover has reinforced panels for maximum protection of the speaker grilles. The cover folds up for compact storage.
JBL SRX910LA VT CVR Vertical Transporter Cover for (4) SRX910LA
AED1,726.66 inc. VAT -
Protect your subwoofer from on-the-road wear and tear with the JBL Cover for SRX928S, a heavy-duty soft cover that's custom designed to fit the SRX928S subwoofer. The front panel has been internally reinforced for maximum protection of the speaker grilles. When not in use, the cover folds into a compact footprint for easy storage.
JBL SRX928S CVR Cover for SRX928S Subwoofer
AED1,510.83 inc. VAT -
The JBL VMA1120 is a Commercial Series Bluetooth-enabled mixer/amplifier designed to provide flexible multi-source mixing and amplification for installation in restaurants, educational institutions, fitness centers, and retail stores. It features a 5-in/1-out mixer and 120W of output power. It can be installed in a standard 19” equipment rack with the supplied rackmount kit or set on a surface such as a desk or ledge. Stream music wirelessly via Bluetooth or connect a USB drive to the front-panel USB Type-A port. Route other sources via Euroblock, RCA, and 1/4" input jacks. The integrated mixer offers level controls as well as bass and treble for each channel. Routing to the Euroblock outputs is configurable. The VMA1120 supports voice-activated ducking and priority muting. The front-panel controls and display make operation easy, and remote volume control is possible via a JBL CSR-V module and a standard Ethernet cable (both available separately).JBL VMA1120 Commercial Series 120W Bluetooth-Enabled Mixer/Amplifier (5-In/1-Out)
AED2,445.00 inc. VAT -
The JBL VMA1240 is a Commercial Series Bluetooth-enabled mixer/amplifier designed to provide flexible multi-source mixing and amplification for installation in restaurants, educational institutions, fitness centers, and retail stores. It features a 5-in/1-out mixer and 240W of output power. It can be installed in a standard 19” equipment rack with the supplied rackmount kit or set on a surface such as a desk or ledge.
Stream music wirelessly via Bluetooth or connect a USB drive to the front-panel USB Type-A port. Route other sources via Euroblock, RCA, and 1/4" input jacks. The integrated mixer offers level controls as well as bass and treble for each channel. Routing to the Euroblock outputs is configurable. The VMA1240 supports voice-activated ducking and priority muting. The front-panel controls and display make operation easy, and remote volume control is possible via a JBL CSR-V module and a standard Ethernet cable (both available separately).
JBL VMA1240 Commercial Series 240W Bluetooth-Enabled Mixer/Amplifier (5-In/1-Out)
AED3,104.00 inc. VAT -
The JBL VMA160 is a Commercial Series Bluetooth-enabled mixer/amplifier designed to provide flexible multi-source mixing and amplification for installation in restaurants, educational institutions, fitness centers, and retail stores. It features a 5-in/1-out mixer and 60W of output power. It can be installed in a standard 19” equipment rack with the supplied rackmount kit or set on a surface such as a desk or ledge.
Stream music wirelessly via Bluetooth or connect a USB drive to the front-panel USB Type-A port. Route other sources via Euroblock, RCA, and 1/4" input jacks. The integrated mixer offers level controls as well as bass and treble for each channel. Routing to the Euroblock outputs is configurable. The VMA160 supports voice-activated ducking and priority muting. The front-panel controls and display make operation easy, and remote volume control is possible via a JBL CSR-V module and a standard Ethernet cable (both available separately).
JBL VMA160 Commercial Series 60W Bluetooth-Enabled Mixer/Amplifier (5-In/1-Out)
AED1,939.99 inc. VAT