Shop

The CUB12R houses a 12" driver, giving it an increased volume and full rich valve tone. Looking at the preamp it's clear that the CUB12R packs more into the amp than it's smaller siblings. It features Gain, Treble, Middle, Bass, Volume, Tone and Reverb controls. The output section of the CUB12R is based around a pair of EL84 tubes giving it a more scooped tone than it's smaller counterparts. Think smooth rich overdrive with bags of gain.

The CUB12R features two input sockets one-labeled 15W the other labeled less than one watt. Plug into the "less than one watt" and you get your great tube tone at a whisper. The less-than-one-watt option allows you to drive the power amp section really hard allowing you to really access the "dark art" tone of power amp distortion.

The CUB12R is a member of the CUB range which offers everyone the opportunity to experience the sound and feel of a good quality tube amp at what is an amazing price.

2 x EL84 power tubes combine with 3 x ECC83/12AX7 pre-amp tubes to deliver 15W RMS power with natural drive and warmth. Opt for either the full 15 watts RMS power or <1W power. <1W is ideal for recording and practice without sacrificing tone; 15W allows for stage-ready volume levels. HH custom-designed 12” drivers with open-back cabinet speakers for dynamic, responsive interaction with tube amplifier; integrated tilt stand under the cabinet enhances projection and tonal variation. Independent Gain and Volume control allows preamp drive to be balanced with the output level, progressing from warm cleans to rich overdrives. 3-band tone stack with Bass, Middle and Treble controls; ‘Tone’ control the overall top-end response, reduce upper-end harmonics on the output and pre-amplifier overdrive.

High quality construction and a 1x12-inch HH Custom Driver make this the ultimate cab for your low to mid-powered amp! Laney designed the IRT112 cab to compliment the IRT models sonic output. Fitted with ergonomic side grab handles and light enough to be carried from gig to gig with no strain. The 12 inch Custom HH-designed speaker provides 80W Power handling.

The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It's loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.

One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You'll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.

The IRT412A has many design features to survive a life of gigging and touring. The solid plywood chassis is built to last, and finished in a rugged black tolex with metal corner protectors. Recessed side handles with comfortable bars enable easier transportation, whilst steel castors assist with moving this large cabinet to and from the stage. Everything about the design ensures longevity and reliability, and you can be sure the IRT412A will deliver its powerful tones night after night.

Hearing the guitar played through a 4 x 12 cabinet is a truly awe-inspiring experience; nothing quite matches it in terms of volume, spread of sound, and depth of tone. The IRT412A features 4 custom HH drivers to send your tone to the far side of the room and back again, and ensures you'll cover your stage with a wall of sound. This cabinet is designed to work with the Ironheart range of amplifiers but will work equally well when paired with your favourite amp, giving you both punch and clarity in a durable, road-ready package.

The new IRONHEART  2 x 12" combo - the IRT60-212 bangs out 60 watts RMS of all ECC83 & 6L6 valve tone with masses of gain and like its metal relatives - such as the Laney KLIPP and the Laney AOR hits you hard between the eyes like a power hammer from hell!

The Combo houses three sonically distinct channels: - Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone. 

The IRT60-212's Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.

The Pre Boost feature makes the need to carry additional boost pedals redundant! Something any gigging player will admit is a great feature.  On the IRT60-212 the footswitchable Pre Boost works just like kicking in your favourite boost pedal right before your amp.  It's available where ever you are on the preamp and can be switched in or out via the supplied footswitch.

A standout feature of the IRT60-212 range is the WATTS control in the master section.  This allows you to really screw down the output of the IRT60-212's 2 x 6L6 output section, down to less than 1 watt!  Great for getting the sound of a full -blown metal head at bedroom levels.

Combine this with a Dynamics control which tightens up you low end when you're playing a full power and you have a great metal tone at whatever level you decide to play at.

The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.

Lionheart represents everything we've learned through forty years of Laney tube heritage, distilled into a single ampilfier range. Designed to deliver the ultimate tone of a tube being pushed hard - warm and expressive, at an output level which can be used in everyday environments.

This twin channel, all tube amplifier features 'Parallel single-ended' Class A output from 4x EL84 matched tubes, providing 20 watts of rich tube power.

The L20H also features gold plated PCB's and jack sockets. Sealed gold contact relays are used in all signal paths for minimum sound coloration, and the amp comes fitted with the renowned "Type 4" large spring line reverb for the classic guitar reverb sound.

Each L20H features a hand stamped 'build number' in the order they come off the Laney production line, and comes with a custom made 'Lionheart' dust cover.

The L20T-112 combo features the same highly respected preamp design as the rest of the Lionheart range and consists of a clean and drive section with shared 3 band EQ, global reverb and an overall tone control.

The L20T-112's all valve power amp houses a road tested 20 Watt Class A parallel single ended EL84 equipped output section, not previously seen in a Lionheart 1 x 12 combo. This offers the player an increased headroom option in a combo whilst still giving masses of vintage valve tone in a compact stylish package.

The rear panel of the L20T-112 features a footswitch socket for switching channel and reverb with the FS2 provided, an FX loop for connecting external FX devices and finally an external speaker socket for adding an additional speaker enclosure such as the LT212. The L20T-112 also features the innovative folding tilt mechanism that has proved popular on the rest of the Lionheart range.

The L20T-112 can sound either vintage or modern depending on how you use the preamp controls - back off the gain, wind up the master and you're cooking up serious retro tone. Digging in hard produces extra bite, or backing off cleans it all up.

The Lionheart range is a significant amplifier in todays market offering serious tone that's often difficult to find even in products costing twice the price. Lionhearts are easy to use and most players will get a great tone out of them within seconds.