Dynacord

The PowerMate compact power mixers incorporate profound know-how, based on our research, development, and inter-communication with our customers in the professional audio market, for decades. It incorporates not less than six dedicated audio devices into one compact frame: mixing console, two effects units, graphic equalizer, USB audio interface, and power amplifier. Each of them is on the highest quality level as you would expect from a stand-alone device. The PowerMate is a real all-rounder for almost all applications with a maximum feature set at minimum size. The mixing section starts with 16 lowest noise, discrete microphone preamps. 6 auxiliary busses, two of them switchable pre/post fader, allow high flexibility for monitoring. The two effects processors offer 100 factory presets, including the already legendary PowerMate-reverbs. Further, each preset can be edited and stored to 20 User memories. The built-in USB audio interface shares 4 playback and four recording channels simultaneously with a PC or Mac, following studio standard 24-bit / 96 kHz. An additional MIDI interface allows the integration of instruments, such as keyboards. A license for Steinberg Cubase software is part of the package. The 11 bands stereo graphic equalizer can be routed flexible to master or monitor channels. The amplifier is extremely powerful with 2 x 1000 W / 4 Ohms (RMS). Due to modern switching mode power supply technology and a class-D output stage, it's very efficient and lightweight, too. Optional speaker protection allows the limitation of long-term power without giving up dynamics.

Professional CLASS "D" power mix for the most demanding users, 22 microphone inputs (13-14, 15-16, 17-18 and 19-20 inputs are shared), 4 stereo inputs (8x 6.3mm jack, USB or RCA), 6x AUX, two 24-bit effect processors (each with 100 effects) with OLED display, RMS power 2x 450W to 8 Ohms, three-band equalizer with parametric centers on the first six inputs, three-band equalizer on stereo inputs, eleven-band graphic equalizer on output (low-pass notch) filter, allowing efficient use of low frequencies depending on the physical capabilities of the speakers and the acoustics of the room. Powermate is equipped with all available protections (thermal, current, load, reverse power on output connectors). USB (2.0 to 4 channels simultaneously) and MIDI interface are also included. It can be equipped with a unique lid LID-2200 (not included) for easy transport and high protection. Made in Germany.

With the DSP 260 digital 2-in-6 sound system manager, DYNACORD is continuing its proud tradition in the fi eld of innovative digital signal processors. Based on the most modern hardware, this system manager offers tried-and-tested as well as new algorithms for the simple and swift construction of active multi-way systems. As much importance has been attached here by the developers to high user-friendliness as to the realization of an extremely favorable price. 24-bit sigma-delta AD/DA converters and a 32-bit floating-point signal processor make possible a dynamic range of 111 dB. In addition to the two analog inputs, a digital stereo input in AES/EBU format is available. A -6 dB pad switch in front of the AD converters offers additional security against overload when the device is connected to mixing desks with very high output levels. The 6 individually mutable outputs are electronically balanced and available on XLR sockets. For all inputs and outputs, easily read LED level meters are provided on the front panel.

Professional CLASS "D" powermix for the most demanding users, 10 microphone inputs (7-8, 9-10, 11-12 and 13-14 inputs shared), 4 stereo inputs (8x 6.3mm jack, USB or RCA), 6x AUX, two 24-bit effect processors (each with 100 effects) with OLED display, RMS power 2x 450W to 8 Ohms, three-band equalizer with parametric centers on the first six inputs, three-band equalizer on stereo inputs, eleven-band graphic equalizer on output (low-pass notch) filter, allowing efficient use of low frequencies depending on the physical capabilities of the speakers and the acoustics of the room. Powermate is equipped with all available protections (thermal, current, load, reverse power on output connectors). USB (2.0 to 4 channels simultaneously) and MIDI interface are also included. The package includes a unique lid, which allows easy transport and high protection. Rack-mountable (RMK-1000 not included). Made in Germany.

High-quality mixer for medium-sized events for use in sound, computer DJing or in a small home studio. Features: 12 combination microphone/line channels and 4 microphones/ stereo-line channels, 6 x fader-controlled AUX busses, two separate master outputs, built-in Dual 24 bit Stereo dual-effect processor, built-in 4-channel USB-Audio for PC connection, power for a lamp, 3-way semi-parametric EQ with additional voice filter and "break brake". Eavesdropping paths are equipped with notch FEEDBACK filter to cancel the feedback, graphic EQ can be used on the main output or on tap. Effect processors can be controlled using the classic footswitch pedal or MIDI commands. All four inputs from the CD can be sent to the stereo channels of the mixer (13/14 and 15/16), similar to the four outputs of the internal sound card (18 / a 19/20). Like other mixes of the CMS and PowerMate series, it is equipped with high-quality components, ALPS faders, Neutrik connectors, and tested several times during the manufacturing process, ensuring unusually high reliability. Made in Germany.