AV

Building on KLARK TEKNIK’s storied legacy of highest-quality direct injection devices, the DI 10P PRO DI offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 10P is ideal for interfacing MP3, CD players, keyboard or drum submixers, and a variety of other stereo sources to mixing consoles. A passive device, the DI 10P does not require any form of external power to complete its mission. Equipped with a custom-built MIDAS transformer, fully adjustable independent level controls for the stereo input channels, DI 10P is the perfect stereo to mono XLR solution for professional audio and multimedia applications.

Building on KLARK TEKNIK’s storied legacy of highest-quality direct injection devices, the DI 20P PRO DI 2 offers the same high headroom, dynamic response and sonic clarity you have come to expect. DI 20P is ideal for interfacing stereo keyboards, samplers and other electronic musical instruments to mixing consoles, and faithfully reproduces the character of electric and acoustic instruments, allowing far more of the detail of musical performances to be captured. A passive device, the DI 20P does not require any form of external power to complete its mission. Equipped with a custom-built MIDAS transformer and switchable input Pad, DI 20P easily accommodates instruments, line, and even loudspeaker level signals – making it the perfect choice for professional audio and multimedia applications.

Modern installed audio applications require a configurable control panel. DM TCE can be easily installed and fits a standard single gang EU (DM TCE-EU) or US (DM TCE-UL) sized wall box. A single Cat5e cable provides POE power and network control data to each device. Each device ships with both black and white trim plates and control knobs to match the venue decor easily.

The DM80-DANTE is a multichannel audio interface expansion card that enables the Klark Teknik DM8000 Digital Audio Processor to connect to external devices using the Dante highperformance digital media protocol to deliver audio over a standard Ethernet IP network. Dual RJ-45 connections share 16 x 16 channel networking of 24-bit / 48 kHz low-latency audio over Cat5e cable (max. 100 m / 330 ft.), while DM80-DANTE's Ethernet connection provides comprehensive PC remote control and configuration. Additionally, a proprietary digital audio networking ULTRANET connection simultaneously outputs up to 16 channels of audio. The DM80-DANTE lets you harness all of the processing benefits of the DM8000, even when it is used in third-party system applications.

Modern installed audio applications require a flexible digital audio processor with user-friendly features, such as user-configurable DSP and routing options, multiple inputs and outputs – and built in audio networking. Designed for installed use in corporate environments, hospitality venues and more, the DM8500 provides 128 channels of Dante digital audio networking for easy integration with other equipment. The highly versatile DM8500 seamlessly integrates with computer based conferencing systems using embedded USB, and can control and monitor external devices using built-in Ethernet and RS232 ports.

The Klark Teknik DN 30R Dante Audio Receiver is a simple and convenient way for connecting active loudspeakers, amplifiers or mixers to a Dante network. It’s compact size as well as the flexibility of its features and mounting options make it the perfect networking solution for hospitality and event spaces, performance and installed audio and so much more. The DN 30R can receive signals from any Dante transmitter via a standard CAT5e or CAT6 cable. This same connection can be used to power the device through Power over Ethernet or via a 24-volt DC input.

The DN200 has become an established favorite amongst both engineers and musicians alike. With its high headroom, dynamic response and sonic clarity, DN200 faithfully reproduces the character of electric and acoustic instruments and allows far more of the detail of musical performances to be captured. DN200 is intended for professional applications where +48 V phantom power is a standard feature on all mixing consoles, and its innovative design results in a significantly higher clipping point than many other active DI Boxes, providing +10 dBu output into a 2 KΩ load. This increased headroom means that much higher-level input signals can be accommodated without the need for an attenuating pad. Combined with a very low noise input circuit topology, DN200 offers a very wide dynamic range, and only requires the -20 dB pad when connecting directly to instrument amplifier outputs or other very high-level signal sources.

The DN32-ADAT card allows you to seamlessly integrate your Midas M32 or Behringer X32 digital mixing console with any ADAT I/O compatible device. This includes stand-alone recorders, digital audio workstations, or other similarly equipped digital mixers and signal processors.

MADI devices are widely used in a broad range of pro audio applications including permanent installation, touring sound, live/studio recording, and broadcasting. The DN32-MADI expansion card enables your Midas M32 or Behringer X32 digital console to exchange 24-bit multichannel audio streams at 44.1 or 48 kHz with any other MADI compatible devices. Protocols supported by the DN32-MADI include AES10-1991 with up to 56 x 56 channels, and AES10-2003 with up to 64 x 64 channels.

The Klark Teknik DN32-USB is a 32 x 32-channel USB audio interface card that instantly expands your Midas M32 or Behringer X32 mixer’s recording and playback capabilities. With the DN32-USB installed in your console’s expansion slot, you can effortlessly multitrack and play back up to 32 channels of high-quality 24-Bit, 48 kHz audio directly to your Mac* or Windows* computer, perform “virtual sound checks”, and remotely control your DAW software – all from the comfort of your favorite chair.

The DN9610 provides a very cost-effective solution to the 100 metre limitation that Ethernet and CAT5 cabling imposes on the physical size of AES50 networks. Its compact form factor allows DN9610 to be placed where required to increase the length of a network connection, all that is needed is a source of mains power.

The DN9620 provides a high channel count solution to the 100 metre limitation that Ethernet and CAT5 cabling imposes on the physical size of AES50 networks. A pair of DN9620 units allow up to two AES50 connections (48 or 96 bidirectional channels channels at 96 kHz or 48 kHz sample rates respectively) to be extended by up to 500 metres via multimode optical fibre or 100 metres via CAT5 copper cable, simplifying long haul cable connections due to the use of a single bidirectional snake cable.

The DN9680 provides a high channel count solution to the 100 metre limitation that Ethernet and CAT5 cabling imposes on the physical size of AES50 networks. A pair of DN9680 units allow up to eight AES50 connections (192 bidirectional channels) to be extended by up to 1,000 metres via single mode optical fibre or 100 metres via CAT5 copper cable, greatly simplifying long haul cable connections due to the use of a single bidirectional snake cable.

The DN9680-MM multi-mode optical fibre transceiver module kit is a retrofit replacement to convert two KLARK TEKNIK DN9680 8 Port AES50 Extender and Multiplexer units from single mode fibre to multi-mode fibre operation. A pair of DN9680 units fitted with DN9680-MM modules enables a bidirectional optical link on one multi-mode dual fibre cable and supports the transmission of 192 bidirectional channels of 24 bit digital audio at 96 kHz sample rate over a 500 metre range. 

The AIR LINK DW 20BR Bluetooth Wireless Stereo Receiver brings the convenience of high-performance audio-streaming to any installed or portable sound system, making it ideal for hospitality and event spaces, as well as retail, home audio, and much more. Featuring a maximum wireless range of 100 feet (30 m), DW 20BR is easy to use and utilises premium-grade Neutrik balanced XLR and unbalanced 1/4" TRS connectors to cover a wide range of audio applications.

When used in conjunction with the DW 20T Wireless Transmitter, the AIR LINK DW 20R Wireless Stereo Receiver brings the convenience of high-performance audio-streaming to any installed or portable sound system, making it ideal for hospitality and event spaces, as well as retail, home audio, and much more. Featuring a maximum wireless range of 100 feet (30 m), DW 20R is easy to use and utilises premium-grade Neutrik balanced XLR and unbalanced 1/4" TRS connectors to cover a wide range of audio applications.

The KT-AES50 network module provides a dual port AES50 digital audio interface, compatible with both the Klark Teknik DN9650 and DN9652 Network Bridges and the Midas NEUTRON-NB Dual Network Bridge Expansion Module for the industry-leading NEUTRON High Performance Audio System Engine.

The KT-DANTE64 network module provides Audinate Dante compatibility for the Klark Teknik DN9650 and DN9652 Network Bridges, and features up to 64 or 32 bidirectional channels at 48 kHz or 96 kHz respectively. KT-DANTE64 offers high performance direct-to-computer audio recording, flexible routing and true Plug and Play technology with low latency, low jitter and sub-microsecond synchronisation. Dante is Internet Protocol (IP) compliant which allows operation over conventional Ethernet networks running on off -the-shelf computer networking hardware, and does not require dedicated network infrastructure.

Whenever you need more headroom for any microphone in your podcast, recording studio or stage setup, the MIC BOOSTER CM-1 is exactly the tool you need to get a crisp and clean microphone signal in a robust and simple to use package.

Whenever you need more headroom for any microphone in your podcast, recording studio or stage setup, the MIC BOOSTER CM-2 is exactly the tool you need to get a crisp and clean microphone signal in a robust and simple to use package.

The QFLEX ISOLATOR has been designed to resolve issues that often arise when large VNET systems are put into operation. It is specifically advised in situations where: the possibility that mains earth potentials exceeding +/-15V may exist between network nodes; electrical noise and interference may be present on the network cables, or wiring faults may exist on the network cable; the installer wishes to create networks that have a large “star” topology; or the network utilises screw terminal terminations.

SENTINEL SM1 System Monitor provides a complete, system wide fault monitoring and reporting solution for mission-critical QFLEX loudspeaker systems, especially in PA/VA and Life Safety applications. Built on a tried and trusted processing engine, the SM1 keeps a watchful eye on the audio system, and if required, any controlling PCs. Issues are reported both via relay contacts to the main monitoring panel in your system, on the front panel display, or through an external audible alarm (not included). Multiple SM1 devices can even monitor each other on the same network simultaneously in systems requiring dual redundancy operation.

For VNET accessories requiring external power; USB & RS232 interface when RS232 control is required, and for Dante and Ethernet interfaces when Power Over Ethernet (POE) is unavailable. The VNET INTERFACE POWER SUPPLY is the ideal freestanding or rack-mountable solution for up to two VNET accessories. Connectivity to a Windows PC or laptop is simple and cost-effective using standard Ethernet cabling, with interconnections between VNET devices via Cat5 cables and RJ45 connectors. The rugged steel enclosure and Ethercon connectors ensure the VNET INTERFACE POWER SUPPLY will provide a long lifetime of reliable service.

The VNET INTERFACE RACK MOUNT is the ideal way to securely install up to 3 of your VNET interface devices into a single 1 U 19" space, in an equipment rack. Installation of devices is fast and easy using the included hardware,plus blanking plates are provided to cover any unused slots.