• Yamaha M-5000 Yamaha Pre-Amplifier for the ultimate in sound BLACK/PIANO

    With over 130 years of experience, Yamaha has grown to be the leading global audio company. The M-5000 embodies this spirit with professional ingenuity and market-leading innovation and serves as the embodiment of high-fidelity audio production.

  • Yamaha C-5000 Yamaha Pre-Amplifier for the ultimate in sound SILVER/PIANO BLACK

    In pursuit of the musical quality that brings to life High-Resolution Audio, the world’s largest audio company introduces the C-5000. From concert theater to home, Yamaha has used its extensive musical history to create an instrument capable of safely reproducing every nuance and emotion of a performance.

  • Yamaha C-5000 Yamaha Pre-Amplifier for the ultimate in sound BLACK/PIANO

    In pursuit of the intangible musical quality that breathes life into high-fidelity audio, the world””s largest sound company presents the C-5000 pre-amplifier. From the concert stage to the home, Yamaha has drawn on its vast musical history to create an instrument capable of faithfully reproducing every nuance and emotion in the performance.

  • Yamaha XDA-QS5400RK Yamaha Multi Zone Amplifier Black

    Specially designed for custom integration of whole home audio systems, the “QS” (Quad Streamer) provides four zones of audio streaming and eight channels of high-performance audio amplification in an ultra-slim, 1U-high, rack-mountable enclosure. Expandable and extremely flexible, the QS works with the MusicCast multi-room audio system, allowing it to be linked with home theater AV receivers, sound bars and Hi-Fi gear in a wide variety of configurations.

  • Laney L50H 50W Class A Lionheart Tube Head with Rev. Footswitch and Cover

    The Lionheart L50H’s BITE control tightens up the bottom end giving a clean and clear punchy sound, whilst the tone control works in a similar fashion to the Tone controls on your guitar except that it works uniquely on the other end of the amplification chain. Giving you the ability to control not only the overall top end response but also reduce the upper end harmonics on the output stage and preamplifier overdrive sounds.
    The Dynamics control allows you to control the Lionhearts low frequency response dialling clockwise gives a more extended low-end response. Dialling the Dynamics control counterclockwise tightens up the low-end response.

    The L50H rear panel features an FX loop with Bypass/Insert/Side Chain operation modes with a level control, the footswitch socket as well as housing the Preamp Out/Power amp in sockets along with the speaker connections for 8 & 16 Ohm cabinets.
    Each Lionheart L50H features a hand stamped “build number” in the order they came of the production line. Designed and manufactured in the UK.

  • Laney NEXUSTUBE Nexus 400W Bass Guitar Head-UK

    This is before you get to the back panel and you realise you also have a powerful D.I Out, USB out, Headphone Out, Aux In, FX Loop, Tuner out, Remote footswitch control and a single speakon out to go to your cab of choice. All of these IO options are extremely useful at one time or another so having them all in one small amp is like a dream come true for a lot of players.

  • Laney TI100 TonnyIommi 100WRMS 2Ch Guitar Head-UK

    The TI100 was born out of an exhaustive period of product development, hand in hand with Iommi at every stage, assessing and refining his sonic needs. The TI100 amp represents a significant advance in Ionni’s sonic identity whilst still retaining the aggressive tone that he is renowned for.The TI100 delivers 100 Watts RMS of full on metal guitar tone in a twin channel format. Each of the TI100s channels features a footswitchable Pre Boost which sits right at the front of the pre amp and functions in the same way as your favorite boost pedal on your pedal board works it does not increase the gain but boosts the signal hitting the first pre amp tube.The two channels on the TI100 are basically the same channels with no sonic difference between them. They have been labelled up as Rhythm and Lead purely for convenience. You can decide on the configuration of each channel.Each channel has independent Pre -Boost and Drive controls along with dedicated 3 band EQ a channel volume, an Enhance co.

  • Laney L412 4X12″ Lionheart Cabinet

    Designed and engineered to compliment the L50H’s sonic output each L412 is manufactured from high-grade premium marine plywood and loaded with 4 12” Celestion G12 Heritage drivers which together deliver 120 RMS of great vintage tone.

    Finished in the same Marine Blue/Beige livery as the L50H and the rest of the Lionheart range the L412 comes with castors as standard and a protective embroidered slipcover.

    Quality speaker cabs from 1×12 to 2×12 to 4×12 quad boxes. Loaded with everything from greenback Celestions® to high quality Fane® speakers. Ibanez, Engl, Hiwatt, and Hughes and Kettner produce professional speaker cabs for all musicians.

     

  • Laney L20T112 Lionheart 1×12 20W Combo 2Input-UK

    The L20T-112 combo features the same highly respected preamp design as the rest of the Lionheart range and consists of a clean and drive section with shared 3 band EQ, global reverb and an overall tone control.

    The L20T-112’s all valve power amp houses a road tested 20 Watt Class A parallel single ended EL84 equipped output section, not previously seen in a Lionheart 1 x 12 combo. This offers the player an increased headroom option in a combo whilst still giving masses of vintage valve tone in a compact stylish package.

    The rear panel of the L20T-112 features a footswitch socket for switching channel and reverb with the FS2 provided, an FX loop for connecting external FX devices and finally an external speaker socket for adding an additional speaker enclosure such as the LT212. The L20T-112 also features the innovative folding tilt mechanism that has proved popular on the rest of the Lionheart range.

    The L20T-112 can sound either vintage or modern depending on how you use the preamp controls – back off the gain, wind up the master and you’re cooking up serious retro tone. Digging in hard produces extra bite, or backing off cleans it all up.

    The Lionheart range is a significant amplifier in todays market offering serious tone that’s often difficult to find even in products costing twice the price. Lionhearts are easy to use and most players will get a great tone out of them within seconds.

  • QSC Gxd4 Light Weight, Class-D Professional Power Amplifier With Dsp, 2 Channels, 400 Watts

    The GXD 4 from QSC is a power amplifier designed for professional PA systems utilizing speakers with 4 and 8 ohm loads and a maximum output of 1600W. The GXD 4 employs a class D output stage with a universal power supply for high performance and efficiency, while keeping the unit lightweight at 11.3 lbs. The integrated DSP section includes High and Low-Pass filters (24dB LR), 4-band parametric equalizer, signal alignment delay, and RMS/Peak speaker protection limiting.

    The parallel XLR and 1/4″ TRS input connectors offer broad compatibility with convenient loop-through capabilities, while the professional binding posts and NL4 connector provide mono and bi-amped speaker connections. In addition to the limiting offered on inputs and outputs, the GXD employs smart speaker protection by providing settings for the loudspeaker’s continuous output and impedance (4 ohm or 8 ohm). The GXD 4 ships with a standard IEC power cord.

  • Laney IRT60212 60W 2×12″ Elec. Guitar Combo

    The new IRONHEART  2 x 12″ combo – the IRT60-212 bangs out 60 watts RMS of all ECC83 & 6L6 valve tone with masses of gain and like its metal relatives – such as the Laney KLIPP and the Laney AOR hits you hard between the eyes like a power hammer from hell!

    The Combo houses three sonically distinct channels: – Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone. 

    The IRT60-212’s Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.

    The Pre Boost feature makes the need to carry additional boost pedals redundant! Something any gigging player will admit is a great feature.  On the IRT60-212 the footswitchable Pre Boost works just like kicking in your favourite boost pedal right before your amp.  It’s available where ever you are on the preamp and can be switched in or out via the supplied footswitch.

    A standout feature of the IRT60-212 range is the WATTS control in the master section.  This allows you to really screw down the output of the IRT60-212’s 2 x 6L6 output section, down to less than 1 watt!  Great for getting the sound of a full -blown metal head at bedroom levels.

    Combine this with a Dynamics control which tightens up you low end when you’re playing a full power and you have a great metal tone at whatever level you decide to play at.

    The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.

     

  • Laney NEXUSSL 2X500W Nexus Studio Live Bass Head – Class D

    The NEXUS-SL was designed and conceived with the simple goal of making the best bass amplifier on the market. Hear it and believe! The nexus-sl’s power amplifier section combines the power and portability of cutting-edge class D Technology with the natural warmth, compression and dynamic range that only a tube can give: a high voltage ECC83 tube sits between the preamplifier and the 1000W RMS power section. The ergonomic front panel design allows great bass tone to be found easily. The bottom row of control knobs houses tone shaping, the top row houses bass-sympathetic digital effects: space (reverb or chorus) and interval (octaves or 5ths). Laney developed two unique functions to control the NEXUS-SL power stage. ‘Tilt’ is an instant ‘EQ seesaw’ and ‘touch’ adjusts the feel of the output response.

  • Laney IRT120H 120W 4Ch. Elec. Guitar Head

    The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.

    One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.

  • Laney IRT-GSSE IRT Studio SE with GS112V Bundle

    The IRT-Studio-SE offers the same classic tones as the big Ironheart amps, but in a low-power, compact, and lightweight design. Equipped with ECC83 Preamp valves and EL84 output valves, the IRT-Studio amp delivers 15W of pure tonal power, with the option to switch to less than 1W via the second input for times when loud volumes aren’t permitted. Even with is compact design, the amp head still offers 3 channels and a wide range of control to dial in the perfect tone for any situation. Its 3 band EQ features push/pull EQ shift functions, extended the frequency ranges for further tone shaping, while the dynamics, tone, and reverb controls allow players to give their sound a personal touch.

    Along with its incredible tonal capabilities, the Ironheart Studio features a variety of ins/outs to seamlessly integrate into existing rigs. Its D.I. output is perfect for directly connecting the amp head to DAWs, PAs, and mixing consoles, and features a high-quality speaker emulator to deliver all valve tones to your DAW or PA, or even both at the same time. The amp is also equipped with an internal dummy load, removing the need to connect an external speaker and deliver a truly silent recording. The FX loop is idea for connecting your favourite stompboxes, and the Aux in is perfect for playing along to backing tracks and songs.

  • Laney GH30R-112 30W 1×12″ Class A/BReverb GHR Tube Combo

    The GH30R-112 combo gives something back to the modern guitar player that for too many years has been overlooked. In a world obsessed by pre-amp distortion, the dark art of power amp distortion has been lost – until now. The GH30R-112 delivers transparent, versatile classic rock tones with the ability to blend in the dynamic characteristic of pre-amp distortion and power amp distortion right there at your fingertips.

    Loaded with a specially chosen Celestion V-Type driver the GH30R-112 delivers an impressive stage presence for such a compact combo. Both channels on the GH30R-112 produce the same tonal characteristic but how you set them up gives you the subtle difference that tone hounds dream about.

  • Laney N410 4X10″ Nexus Bass Enclosure

    The Nexus N410 Cabinet is an ultra-light, high performance bass enclosure, loaded with neodymium drivers and finished in Laney Tuffstuff coating, The Nexus N410 has been designed to be used in conjunction with the nexus-sl and SLS bass head. The N410 is loaded with 4 x lavoce neodymium 10” drivers Plus a La Voce 1″ Exit compression driver which is switchable to on/off and half power settings. Selected exclusively for the Nexus range, These Italian-designed speaker components are truly outstanding for bass. The lightweight, heavy duty, plywood cabinet is then finished in Laney Tuffstuff: an incredibly tough, ultra-durable and resilient polyurethane coating designed to deal with the rigors of life on the road.

  • Laney L5T112 Lionheart 1×12 5W Combo 2Input-UK

    The L5T-112 is a 5 watt Single-Ended, Class ‘A’ tube combo loaded with a 12″ Celestion G12H 70th Anniversary driver to give the ultimate boutique guitar tone. Play through a Lionheart – it reacts to your touch. From the moment you strike a note you’re connected. Let the music flow through you – from your fingers to the guitar, through the amplifier to the beating heart of the speaker. You are one. You are Lionheart.

    The L5T-112 features a chrome twin channel pre amp with a Bright switch, shared 3-band EQ, global Tone and Studio-quality Digital Reverb. Constructed from Marine Grade Plywood with retro banding strip and leather strap handle, the L5T-112 looks as good as it sounds.

    Designed and engineered with pride in Great Britain, The Lionheart L5T-112 is a 5 watt, Single-Ended, Class ‘A’ guitar combo loaded with a 1 × 12 Celestion G12H 70th Anniversary driver, all designed to give the ultimate guitar tone.

    With less of a emphasis on preamp distortion, with the L5T-112 you can hear and feel the power tubes clipping to breakup, giving a much richer harmonic content and a larger dynamic range. With the L5T-112 you can really feel and hear the differences in tone based on your picking technique.

  • Laney IRT60H 60W 4Ch. Elec. Guitar Head

    The Laney Ironheart IRT60H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It’s loaded with a pair of premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.

    One of the coolest features of the IRT60H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You’ll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.

  • Peavey KB5 150-Watt 2×10 Keyboard Amplifier

    The KB 5 was designed as a personal PA system in a keyboard amp. The KB 5 features separate inputs on each channel and can easily handle voice, microphones and other instruments, including acoustic and electric guitars, drum machines and backing machines, such as CD and DAT players. Other essential features include stereo effects loop, ground lift, master level, XLR balanced stereo line out, DDT™ defeat switch and the capability to drive an external speaker.

  • Laney VC30212 30W 2×12″ Elec Guitar Tube Guitar Combo

    Delivering what feels like a living, breathing tone, the VC30 is 12″custom designed dynamic amp. The single channel has Hi and Lo inputs, footswitchable gain stages with own level control, 3-band EQ, and a bright switch. Also includes reverb, effects loop, and a footswitch.

    The VC30-212 is a very dynamic amp and can be easily controlled by the pressure of your pick on the strings and many tones can be found between one and ten on your guitar’s volume knob. From a chiming bright clean sound to the vintage caress of the creamy overdrive, whether it is single coils or hum buckers, the VC30 delivers.

    The VC’s clean channel is immediately impressive and lives up to its name remaining clean almost all the way to the maximum volume, when it begins to break up in the perfect pleasant way you only get from pushing an EL84 hard. Drive-wise the VC range has its roots in the bluesy side of things, but push the front end of the amp a little harder with a pedal and the gain really sings.

     

  • Yamaha THR10IIWIRELESS Guitar Amplifier

    The Yamaha THR10II Wireless guitar amp brings realistic tube-amp tones and feel to your desktop — and beyond. Yamaha originated the “desktop amplifier” category and the THR10II Wireless takes the concept to new heights. New amp models for electric guitar and bass, mic models for acoustic-electrics, and flat voicings for everything else let you cover any genre. And it’s fully wireless. Play wherever your music takes you with Bluetooth support, a Line 6 wireless receiver, and built-in rechargeable battery. A redesigned enclosure with increased bass response and a refreshed look that complements any décor complete the package.

  • Laney L20H Lionheart 20W 2Ch Guitar Head-UK

    Lionheart represents everything we’ve learned through forty years of Laney tube heritage, distilled into a single ampilfier range. Designed to deliver the ultimate tone of a tube being pushed hard – warm and expressive, at an output level which can be used in everyday environments.

    This twin channel, all tube amplifier features ‘Parallel single-ended’ Class A output from 4x EL84 matched tubes, providing 20 watts of rich tube power.

    The L20H also features gold plated PCB’s and jack sockets. Sealed gold contact relays are used in all signal paths for minimum sound coloration, and the amp comes fitted with the renowned “Type 4” large spring line reverb for the classic guitar reverb sound.

    Each L20H features a hand stamped ‘build number’ in the order they come off the Laney production line, and comes with a custom made ‘Lionheart’ dust cover.

  • Laney NX410 Nexus 4×10″ 800W Bass Cabinet-UK

    With all the power and punch you would expect from a Laney cab but now without the weight to go with it! Packed with Celestion Neodymium drivers you still get an amazing performance with plenty of low end “oomph” but without the traditional mass of the magnet! The perfect candidate for taking on the road, use its impressive 800 watts to create a huge sound from clubs to festivals around the world!

    Nexus cabinets are loaded with cutting edge Celestion Neodymium drivers, which use ultra powerful magnet material in order to allow the mass of the magnet to be reduced without compromising the performance of the driver. Result: same great performance but with a greatly reduced cabinet weight which makes life on the road with a Nexus stack much more manageable.

    The NX410 is fitted with the exceptionally impressive 10” Celestion Neodymium which gives amazing performance which reducing the weight of the cabinet dramatically. A mighty 800 -watts power handling can be accessed via Neutrik combination sockets that accept Speakon or ¼-inch jack cables mounted on the rear panel.

     

  • Laney IRTSTUDIO 15W1W 3Ch. Elec.Guitar.Head

    The Laney Ironheart is a rack mountable Guitar amp that delivers 15w of tube driven tone but thats just half the story.

    The real strength of this amp is when you start recording with it. It features a dummy load option which means you do not need to connect to a speaker cab to record you can silently record directly. It also features a built in USB interface that records the processed guitar and the clean direct signal which can then be re-recorded via the built in reamping feature.

    This gives you great creative options and really makes this product stand out from others.

    Check out our exclusive video below where Lee and Rob show and explain how reamping works with this amp.

  • Laney NEXUSSLS 1X500W Nexus Studio Live Bass Head Class D

    While a lot of Class D amps are smaller and some even have a bit more power, none have the same feature set as this amplifier. On the front panel you not only have your standard 3 band EQ with parametric Mid sweep but also a 4 way shape control, tilt, touch, space, interval and focus controls that all give you an extra level of flexibility that very few Class D amps can offer.

  • Behringer V55INFINIUM Guitar Combo Electric 1×12″ 55W RMS 2CH Tube Modeling

    The Vintage V55 Infinium 55W 2-Channel Guitar Combo Amplifier from Bugera is a hand-built 2-channel, 55-watt guitar tube combo amplifier that is designed to provide you tonal options ranging from blues to crunch. The combo amp has a Turbosound-designed 12-inch speaker that is powered by its dual 6L6 tube power section. Its 2-channel preamplifer features three 12AX7 tubes. The V55 Infinium has normal and bright inputs to cater to your instruments tone. Its built-in reverb and channel selection can be switched with the included footswitch.

  • Behringer BXD15 Guitar Combo Bass 1×15″ 1000W 2 Ch. Turbo Spkr

    The Ultrabass BXD15 700W 1×15″ Bass Combo Amplifier from Bugera is a Class D combo bass amplifier capable of up to 700 watts of output power. It features A 15-inch speaker and employs Bugera’s Dynamizer technology to provide parallel-style compression to your playing to help control your dynamics. The BXD15 has an FX loop that allows you to integrate stompbox or rack effects into the rig. Additionally, the amp has a switchable tuner output that can also serve as a live monitor feed. The amp can be used both live and in the studio, thanks to its balanced DI XLR output.

  • Laney AH300 300W 15″ 5Ch. Multi Combo W/DSP

    The principle behind the Audio hub range is simple: Audio hub products are designed to give musicians the optimum performance, flexibility and sound quality for any given audio equals flexibility true to their name Audio hubs perform with ease in any amplification application keyboards, electronic drums, vocals, acoustic and electric string instruments as well as playback are all handled with ease; The AH300’s 5 Channels means that this unit is ideal as a small portable trio’s PA; It handles vocals, guitars, keys and electronic drums without any problem at all, with every input you could want catered for; Each channel has independent gain, two band EQ and an independent effects send to the on board DSP; With a line in and record out option, the AH150’s master section allows you complete control over the unit’s performance; Rated at 300 Watts RMS and housing a 1 x 15″ Custom Designed Driver and HF Horn the AH300 gives you plenty of power and headroom; Audio hubs sound great they are powerful and true what you put in you get out but louder much louder; They sound clean and clear and should you wish to, the onboard EQ’s are powerful enough to dial out difference from venue to venue, meaning you get the best sound every time, all the time.

  • Laney LT212 Lionheart 2×12″ 60WRMS Cabinet-UK

    If you have the Laney L20H, you won’t want to compromise that great Class A tone by using any old cabinet. Instead, why not get the matching Laney LT212 cabinet. Featuring 2x 12″ Celestion Heritage G12H Drivers and closed back construction, this cab gives thick, deep tones with growling bottom end power. This stylish and great sounding cab also features a folding tilt mechanism for optimum sound projection. Each LT212 features a hand stamped ‘build number’ in the order they come off the Laney production line, and comes with a custom made ‘Lionheart’ dust cover. At 19kg this cab will easily fit into your regular gigging rig.

  • Behringer BXD15A Guitar Combo Bass 1×15″ 1000W 2 Ch. Alum Cone Turbo Spkr

    The Ultrabass BXD15A 700W 1×15″ Bass Combo Amplifier from Bugera is a Class D combo bass amplifier capable of up to 700 watts of output power. It features a 15-inch aluminum-cone speaker, and employs Bugera’s Dynamizer technology to provide parallel-style compression to your playing to help control your dynamics. The BXD15A has an FX loop that allows you to integrate stompbox or rack effects into the rig. Additionally, the amp has a switchable tuner output that can also serve as a live monitor feed. The amp can be used both live and in the studio, thanks to its balanced DI XLR output.

  • Laney R500-115 500W 1X15″ Richer Bass Combo

    The Laney R500-115 is a solid-state combo packing an impressive 500W RMS into a sealed cabinet providing versatility, portability and reliability to all levels of bass player from rehearsal room to a large stage. The front panel houses Normal or High jack inputs a balanced XLR D.I. provides direct, mic-free mixer connection when recording or performing live. An Aux input allows play-along to a backing track and a headphone socket allows for late night playing. The R500-115 lets any bass player own their tone. Compressor Tuner out Speakon Connectors Single Channel 1 x 15” custom driver + HF Horn 10 band Graphic EQ Item dimensions: 563mm x 523mm x 365mm (HWD) Carton dimensions: 650mm x 585mm x 430mm (HWD) Item weight: 23.30kg.

     

     

  • Laney N210 2X10″ Nexus Bass Enclosure

    The NEXUS N210 cabinet is an ultra-light, high performance bass enclosure, loaded with neodymium drivers and finished in Laney’s Tuffstuff coating, the NEXUS N210 has been designed to be used in conjunction with the NEXUS-SL and SLS bass head.

    The N210 is loaded with a LaVoce neodymium 15” driver plus a La Voce 1″ exit compression driver which is switchable to on/off and half power settings. Selected exclusively for the NEXUS range, these Italian-designed speaker components are truly outstanding for bass.

    The lightweight, heavy duty, plywood cabinet is then finished in Laney’s Tuffstuff: An incredibly tough, ultra-durable and resilient polyurethane coating designed to deal with the rigours of life on the road.

  • Laney N115 1X15″ Nexus Bass Enclosure

    The NEXUS N115 cabinet is an ultra-light, high performance bass enclosure, loaded with neodymium drivers and finished in Laney’s Tuffstuff coating, the NEXUS N115 has been designed to be used in conjunction with the NEXUS-SL and SLS bass head.

    The N115 is loaded with a LaVoce neodymium 15” driver plus a La Voce 1″ exit compression driver which is switchable to on/off and half power settings. Selected exclusively for the NEXUS range, these Italian-designed speaker components are truly outstanding for bass.

    The lightweight, heavy duty, plywood cabinet is then finished in Laney’s Tuffstuff: An incredibly tough, ultra-durable and resilient polyurethane coating designed to deal with the rigours of life on the road.

  • Behringer V55HD Guitar Amplifier Head Electric 55W 2CH w/ Reverb

    The Vintage V55HD Infinium 55W 2-Channel Tube Guitar Amplifier Head from Bugera is a hand-built 2-channel, 55-watt guitar tube amplifier that is designed to provide you tonal options ranging from blues to crunch. It has a three 12AX7 tube preamp section and is driven by a dual 6L6 output tube section. The V55HD Infinium has normal and bright inputs to cater to your instruments tone. Its built-in reverb and channel selection can be switched with the included footswitch.

  • Laney RB8 300W15″ Bass Combo W/7 Band Eq

    A serious bass players combo: The Richter RB8 offers a 300 watt output stage, 15″ custom Celestion speaker, switchable HF horn, bass, treble and 7 band graphic mid, switchable compressor and switchable limiter in a road-ready cabinet with top and side handles. Laney – Power To The Music

  • Behringer BXL3000 Guitar Combo Bass 1×15″ 300W RMS w/ Equalizer

    Behringer’s Ultrabass BXL3000 300 Watt 2-Channel Bass Workstation comes with a 15″ Classic Tone Series BUGERA speaker and a Compressor function that helps smooth out volume peaks. The 7-band EQ with a frequency indicator helps you shape your sound. You can clarify or distort your sound with dedicated channel Gain, Shape and Level controllers. On board is Behringer’s unique technology, the Dynamizer that helps give you the ultimate punch. A switchable Ultrabass subharmonics processor creates stunning low-end power.

    In addition, the BXL3000 allows you to expand your sound with FX inserts for external effects devices. There is also a balanced stereo XLR line out with a ground/lift switch, which enables a direct connection to your mixing console. Included is a dual footswitch that lets you select Ultrabass and Shape functions.

     
  • Laney TI15112 15W1W 12″ 1ch Iommi Sig Amp

    Tony’s backstage amp, the Laney TI15-112 takes all the raw power and tone of the TI100’s high gain channel and crams it into a compact single channel all tube amp. Utilizing Laney’s unique dual wattage input option means you can push the EL84 output section hard and get 15 watts rms of full on tone or plug into the less than 1 watt and get exactly that — your same great tone but at less than 1 watt.
    The TI15-112 also features the cool flexibility of being able to record both silently, for late night recording sessions or in live situations via the SPEAKER EMULATED RECORD OUT feature on the rear panel.
  • Laney RB4 165W 15″ Bass Combo

    Flexibility is key for the modern day bass player and the Richter range is perfect at adapting to your every genre or style. Suitable for seasoned professionals or new beginners, the Richter bass range offers premium quality bass tones that resonate beautifully. Whatever your requirements you can be sure that the Richter range will consistently deliver fantastic results.

    The RB4 is a well-established, highly-acclaimed solid-state bass amplifier with something to suit every bass player. Ideal for the bass player looking for a conventional style but compact bass combo.

    The RB4 can be played at home, in the recording studio or live on stage. Full of bass friendly features and a bass tone much bigger than its appearance the RB4 is a serious player choice.

     

    Laney RB4 165W 15″ Bass Combo

    AED1,642.20 inc. VAT
  • Laney CUB212R 15W 2X12″ Elec. Guitar Tube Combo with Reverb

    2 x EL84 power tubes combine with 3 x ECC83/12AX7 pre-amp tubes to deliver 15W RMS power with natural drive and warmth. Opt for either the full 15 watts RMS power or <1W power. <1W is ideal for recording and practice without sacrificing tone; 15W allows for stage-ready volume levels. HH custom-designed 12” drivers with open-back cabinet speakers for dynamic, responsive interaction with tube amplifier; integrated tilt stand under the cabinet enhances projection and tonal variation. Independent Gain and Volume control allows preamp drive to be balanced with the output level, progressing from warm cleans to rich overdrives. 3-band tone stack with Bass, Middle and Treble controls; ‘Tone’ control the overall top-end response, reduce upper-end harmonics on the output and pre-amplifier overdrive.

  • Yamaha THR10II Guitar Amplifier

    The Yamaha THR10II amp brings realistic tube-amp tones and feel to your desktop. Yamaha originated the “desktop amplifier” category and the THR10II takes the concept to new heights. New amp models for electric guitar and bass, mic models for acoustic-electrics, and flat voicings for everything else let you cover any genre. Bluetooth support lets you wirelessly play your music through the hi-fi speakers, sculpt your perfect tone with the mobile editor app, and more. A redesigned enclosure with increased bass response and a refreshed look that complements any décor complete the package.

    Yamaha THR10II Guitar Amplifier

    AED1,564.50 inc. VAT
  • Laney LV300 120W 12″ 3Ch. Elec. Guitar Combo

    The LV300 features a pre-amp valve – housing Tube Fusion Technology in its hybrid design. Giving you that legendary Valve Mojo to the pre-amp drive tones! Plus another benefit of a hybrid design is a lack of weight – any model in the LV range can be loaded in and out of a car boot or van without fear of injury but is as tough as it needs to be to withstand the rigours of gigging!

    V is more to these amps than just being in the word LiVe – each drive channel features a V switch. The V switch gives you an instantly scooped tone. The nice thing is that there is one per channel – giving you flexibility to scoop the rhythm tone whilst leaving the solo tone unaffected. Next comes the VTS switch – this feature globally boosts certain bass and upper mid frequencies whilst cutting some of the lower mid.

    Finally, the digital reverb section with individual controls for the clean and the drive channels, a really nice user-friendly feature.

    The rear panel of the LV300 features everything you need – simple series effects loops an extension speaker socket and a footswitch socket. Each model in the LV range comes supplied with a sturdy metal FS3 custom three way footswitch!

    The LV300 is geared towards live performance. Loud. Stage worthy and refreshingly user friendly. Finished in a tough black tolex with large protective corners the LV300 will look as good as it first did gig after gig.

  • Laney IRT15H 15W1W 1ch ElecGuitarHead

    The Laney IRT15H-2 15W tube guitar amp head delivers a single Ironheart channel that’s flavored with 12AX7 (preamp) and EL84 (power amp) tubes. For when 15W is too much, there’s also a 1W guitar input. Other features include high-quality digital reverb, an FX loop with variable level control and a DI output.

  • Laney IRT412A 230W 4×12″ Elec. Guitar Cabinet Angled

    The IRT412A has many design features to survive a life of gigging and touring. The solid plywood chassis is built to last, and finished in a rugged black tolex with metal corner protectors. Recessed side handles with comfortable bars enable easier transportation, whilst steel castors assist with moving this large cabinet to and from the stage. Everything about the design ensures longevity and reliability, and you can be sure the IRT412A will deliver its powerful tones night after night.

    Hearing the guitar played through a 4 x 12 cabinet is a truly awe-inspiring experience; nothing quite matches it in terms of volume, spread of sound, and depth of tone. The IRT412A features 4 custom HH drivers to send your tone to the far side of the room and back again, and ensures you’ll cover your stage with a wall of sound. This cabinet is designed to work with the Ironheart range of amplifiers but will work equally well when paired with your favourite amp, giving you both punch and clarity in a durable, road-ready package.

  • Laney IRT412 230W 4×12″ Elec. Guitar Cabinet Straight

    The IRT412 custom-designed straight guitar cabinet is constructed from rugged plywood and loaded with 4 Custom 12” HH drivers handling 320 watts. Laney Amplification began in 1967 when Lyndon Laney, whilst playing in a local band, ‘The Band of Joy’ with John Bonham on drums and Robert Plant on vocals, turned his musical interest into amplifier construction. Initially working in his father’s garage. Lyndon Laney sought to design and build amplifiers with key ‘tonal’ characteristics that were unheard of at the time. Formed in 1967 by Lyndon Laney, Laney Amplification is a West Midlands based guitar and musical instrument amplifier manufacturer who were closely involved with Tony Iommi of Black Sabbath in the birth of the ‘Heavy Metal’ music genre. Since 1967, Laney Amplification has gone on from strength to strength and is now a multinational.

    Designed and engineered in the Black Country, Great Britain, the Ironheart IRT412 is a standard-sized, straight guitar cabinet loaded with 4 x 12” HH drivers designed to deliver punch and clarity when used with any amplifier.

    Constructed from rugged plywood the IRT412 is finished with black metal corners, black textured front fret, black basket weave Tolex, steel castors and comfortable side mounted bar handles the IRT412 cabinet is designed to survive a life on the road for years to come.

  • Laney AH4X4 40W 4×4″ 6Ch. Audiohub Combo

    The AH4X4 is designed to be used for everything! Gigs, parties, conferences, at home, work, indoor events, outdoor events, the list is endless. You’ll never have a dull moment, connect your music via Bluetooth! Enjoy up to 24 HOURS of continuous battery power use. The Intelligent Power Management can switch between Regular and ECO power modes to get the upmost performance usage from the batteries: 3 x Lithium ION cells or 8 x AA batteries can be used. Alternatively, the AH4X4 can be used direct from a power supply where mains power is available. The AH4X4 is the perfect solution, meticulously designed for the ease of use you need, just plug in and go, wherever you may be, you will know that the AH4X4 will meet your demands.Anti-Feedback control can be engaged and adjusted to eliminate the body resonance feedback often associated with amplified acoustic guitars at high volume levels. To eliminate body resonance feedback, switch the filter in and adjust the anti-feedback control until the body resonation reduces. You should find a “sweet spot on” the control where any feedback present disappears.

  • Behringer BVT5500H Guitar Amplifier Head Bass 550W w/ VTC Tube Voice Selector

    The Behringer Ultrabass BVT5500H Bass Amplifier Head is a powerhouse bass head that’s built to take on gigs large and small. Its rich feature set includes 550 watts of stage-shaking power, a nine-band grahic EQ, built-in limiter and overdrive, Behringer’s exclusive Virtual Tube Circuitry, and the extensive connectivity pros demand. Additionally, the Voicing selector lets you quickly choose one of five frequency-biased settings that change the overall timbre of the amp from mid-scooped (for pop-n-slap definiton) to bass emphasis (for a warm and tubby tone).

    Additional value-adding details include a ground lift switch, a dedicated tuner output, an effects loop (with front-panel mix knob), and dual inputs (one for full gain input, one for a -15dB padded input). The BVT5500H has the flexibility and power to take on your next performance, wherever it is.

     
  • Laney AH150 120W 12″ 5Ch Multi Combo W/Dig

    150 watts RMS – Carpet covered, dual position kickback cabinet. 5 channels: channel 1: balanced XLR/unbalanced line, channel 2: balanced XLR/Hi-Z instrument, channel 3 and 4: stereo unbalanced line and channel 5: RCA line input. 1 x 12″ custom designed loudspeaker and HF horn – Level, treble (channel 1 and 2), bass (channel 1 and 2), FX level (channel 1-4) Master 5 band graphic EQ (+- 12 dB) – On-board digital delay with feedback, time and level controls – Jack inputs on all channel – XLR input on channel 1. Headphone socket with level control – Line out – jack – Aux/CD input 3.5 mm stereo jack – FX Loop.

  • Laney RB6 165W 15″ Bass Combo

    Flexibility is key for the modern day bass player and the Richter range is perfect at adapting to your every genre or style. Suitable for seasoned professionals or new beginners, the Richter bass range offers premium quality bass tones that resonate beautifully. Whatever your requirements you can be sure that the Richter range will consistently deliver fantastic results.

    The RB6 offers 165 watts RMS of deep bass tone into a 15” Custom designed driver plus a switchable horn and features a smart Metallic grey control panels, clearly laid out allowing quick understanding and easy access to sounds, housing ‘chrome’ knobs with white pointers to assist the user during darker moments on stage.

    Laney RB6 165W 15″ Bass Combo

    AED1,392.30 inc. VAT

Main Menu