The CMS 803DC BM is a full bandwidth 360-Watt high sensitivity loudspeaker that utilises our third generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 8″ Dual Concentric pointsource driver with Omnimagnet technology on a Torus Ogive Waveguide, the UL certifi ed CMS 803DC BM delivers wide and consistent broadband directivity with enhanced intelligibility – plus highly accurate and linear response.
Features
- Full range ceiling loudspeaker for installation applications
- 90 Watts continuous, 360 Watts peak power
- Next generation 8″ Dual Concentric driver featuring Omnimagnet technology
- Torus Ogive waveguide for improved high frequency response and directivity
- Blind Mount version supplied with acoustically enhanced zinc plated steel back can
- Integrated single unit construction for ease of installation
- UL 1480 certified for general signalling systems
- UL 2043 certified for air-handling spaces
- Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
- Low insertion loss 60 W line transformer with easily accessible tapping switch
- Optimised for Lab Gruppen low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
- Semi matt white finish fits unobtrusively in any environment
- Powder coated UV resistant perforated steel mesh grille with dust protection
- Removable magnetic grille for custom painting
- Optional ARCO designer grilles available for minimal architectural impact
- Self-aligning 5 way clamp mounting system
- Mounting C-ring and ceiling tile rails included
Specifications
Performance
Frequency response (-3 dB) (1) |
47 Hz – 30 kHz BM Backcan |
Frequency range (-10 dB) (1) |
40 Hz – 35 kHz BM Backcan |
Frequency range (-10 dB) (1) |
41 Hz – 35 kHz PI Backcan |
System sensitivity (1 W @ 1 m) (2) |
92 dB (1 W = 4 V for 16 Ohms) |
Nominal coverage angle |
90 degrees conical |
Power handling (3) | |
Average |
90 W |
Programme |
180 W |
Peak |
360 W |
Recommended amplifier power |
180 W @ 16 Ohms |
Nominal impedance (Lo, Z) |
16 Ohms |
Rated maximum SPL | |
Average |
112 dB |
Peak |
118 dB |
With THP60 – average |
110 dB |
Transformer taps (via front rotary switch) | |
70 V |
60 W (83 Ω) / 30 W (165 Ω) /15 W (330 Ω) / 7.5 W (660 Ω) /OFF & low impedance operation |
100 V |
60 W (165 Ω) / 30 W (330 Ω) /15 W (660 Ω) / OFF & lowimpedance operation |
Transducers
Dual concentric point source driver |
1 x 200 mm (8.0″) Dual Concentricdriver, using Omnimagnet technology |
Low frequency |
44 mm (1.75″) voice coil, treated multifiber paper pulp cone |
High frequency |
25 mm (1.00″) PEI dome |
Physical
Enclosure | |
Backcan |
Zinc plated steel |
Baffle |
Reflex loaded UL 94V-0 rated ABS |
Grille |
Steel, with weather resistant coating |
Safety features |
Safety ring located at rear of enclosurefor load bearing safety bond |
Clamping design |
Security toggle clamp Min / Maxclamping range 9.5 mm (0.37″) /60 mm (2.36″) Recommendedclamp torque: 1.5 Nm |
Backcan options | |
Blind mount (BM) |
Complete with fi xed backcan |
Pre install (PI) |
Separate backcan for pre-installation |
Cable entry options |
Cable clamp & squeeze connector forconduit up to 22 mm |
Conduit knockouts on PI Backcan |
3 Sets of horizontal positions19 / 22 / 28 mm (0.75″ / 0.87″ / 1.10″) |
Connectors |
Removable locking connectorwith screw terminals with“loop through” facility |
Compliance |
UL-1480, UL-2043, CE |
Physical
Dimensions | |
Bezel diameter |
319.0 mm (12.56″) |
Front of ceiling to rear of backcan |
– |
Front of ceiling to top of safety loop |
– |
BM model: Front of ceiling to rear of backcan |
310.5 mm (12.22″) |
BM model: Front of ceiling to top of safety loop |
327.7 mm (12.90″) |
PI model: Front of ceiling surface to rear of speaker unit |
125.6 mm (4.94″) |
PI model: Front of accessory backcan bezel to top of safety loop |
168.5 mm (6.63″) |
Hole cutout diameter (all models) |
295 mm (11.61″) |
Net weight (ea) | |
CMS 803DC BM |
8.5 kg (18.74 lbs) |
CMS 803DC PI |
5.0 kg (11.02 lbs) |
PI Backcan |
3.7 kg (8.1 lbs) |
Included accessories |
C-Ring, tile-bridge kit, paint mask,cut-out template, grille |
Optional accessories |
Plaster (mud) ring, Arco grille |
Reviews
There are no reviews yet.