he black NuQ115B-AN 3000W 15″ Front-Loaded Subwoofer from Turbosound is a powered 15″ subwoofer system that is ideally suited for a wide range of music and live sound-reinforcement applications. Designed to work individually without a controller, this subwoofer provides optimal FOH performance, as well as remarkable drum- and side-fill monitoring applications.
With a bass-reflex port design enclosure, the NuQ115B-AN Subwoofer features a high-power, double-suspension 15″ low-frequency driver that utilizes a specialized inside/outside wound voice coil for higher magnetic density, heat dissipation, high power-handling capacity, and improved efficiency. The subwoofer provides fast and accurate transient response for virtually distortion-free operation.
Output power for the NuQ115B-AN Subwoofer is provided by means of an efficient and lightweight KLARK TEKNIK 3000W Class-D power amplifier. An easy-to-use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for low-frequency response at low volume levels and transparent limiting for clarity at high-output levels.
Features
- Front-loaded powered subwoofer for portable PA and installation applications
- 3000W power featuring KLARK TEKNIK Class-D technology
- KLARK TEKNIK Digital Signal Processing for total system control
- ULTRANET digital-audio networking connects to mixers and other sources
- Double-suspension 15″ low-frequency driver with inside/outside wound coil
- Fully featured user interface with LCD display for easy navigation
- Windows remote control software downloadable
- Low-distortion bass reflex port design
- 0.75″ birch-plywood enclosure with hard-wearing semi-matte black paint finish
- Integral M10 rigging points for ease of installation
- 35mm pole mount to support satellite speaker
- Mains input on Neutrik powerCON connector
Specifications
Frequency Response | 45 Hz to 150 Hz ±3 dB 38 Hz to 200 Hz -10 dB |
Nominal Dispersion | Half space |
Maximum SPL | 135 dB peak |
Crossover Type | Active |
Transducer | 1 x 15″ (39 cm) LF driver |
Limiter | Peak and rms |
Maximum Power Output | 3000 W |
Type | Class-D |
Protection | Short circuit, thermal |
Input | 1 x Combo jack/XLR 1 x XLR |
Sensitivity | +4 dBu or +14 dBu software switchable |
Input Impedance | 40 kOhms balanced |
Maximum Input Level | +22 dBu |
Ultranet Input/Link | 2 x RJ45 |
Mains Supply | Neutrik powerCON 20 A |
DSP | Rotary push-encoder and level control Buttons for process, setup, exit, enter |
EQ Presets | Positioning, Sound mode |
Display | LCD 128 x 32, blue, backlit |
Delay | 0 to 300 ms |
Equalization | High- and low-shelving EQ 2 x parametric EQ |
Limiter | Zero-attack input limiter |
Presets | 20 total presets, 19 user-definable |
Crossover | Low-pass L-R 24 dB/oct |
Protection | Lock-out function for all settings |
A/D Conversion | 24-bit, 44.1/48 kHz sample rate |
Converter | 24-bit, delta-sigma |
Signal System | 16 channels |
Latency | < 0.9 ms |
Frequency Response | 20 Hz to 20 kHz (+0 / -3 dB) |
Dynamic Range | Typical 92 dB |
Cabling | Shielded Cat5 Length Maximum: 246′ (75 m) recommended |
Power | 180 W @ 1/8 maximum |
Voltage | 120 V, 60 Hz (T 15 A, H 250 V) |
Construction | 0.6″ (1.8 cm) birch plywood |
Grille | Powder-coated perforated steel |
Hardware | M10 x 16 points |
Dimensions | 20 x 23 x 24″ (52 x 58 x 62 cm) |
Weight | 82 lb (37 kg) |
Package Weight | 90.4 lb |
Reviews
There are no reviews yet.