The black NuQ152-AN 2500W 2-Way 15″ Full Range Powered Loudspeaker from Turbosound is ideally suited for a wide range of portable and fixed-installation speech and music sound-reinforcement applications. Designed to work individually without a controller, the NuQ152-AN Loudspeaker provides optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge-monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.
The NuQ152-AN Loudspeaker features a 15″ low-frequency driver with a low-mass voice coil for improved transient response and an aluminum dome with 1″ neodymium high-frequency compression driver, which is mounted on a rotatable 70 x 70° (horizontal x vertical) dispersion-converging elliptical waveguide. Output power for the NuQ152-AN Loudspeaker is provided by means of an efficient and lightweight KLARK TEKNIK 2500W Class-D power amplifier. An easy-to-use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive full-range response at low volume levels and transparent limiting for clarity at high output levels as well as for long-term reliability.
Features
- 2-way full-range powered loudspeaker for portable PA applications
- 2500W power featuring KLARK TEKNIK Class-D technology for total system control
- ULTRANET digital audio networking connects to mixers and other sources
- Carbon fiber-loaded 15″ low-frequency driver with inside/outside coil
- Aluminum dome with 1″ neodymium motor compression driver
- Low-distortion waveguide provides 70 x 70° (H x V) dispersion
- Fully featured user interface with LCD display for ease of navigation
- Windows computer remote control software downloadable
- 15mm birch-plywood enclosure with hard-wearing semi-matte black paint finish
- Rugged powder-coated perforated-steel mesh grille
- Integral 35mm pole mount and handles
- Multiple internal rigging points allow bracket mount and suspension in any orientation
- Mains input on Neutrik powerCON connector
Specifications
| Frequency Response | 55 Hz to 18 kHz ±3 dB 50 Hz to 20 kHz -10 dB |
| Nominal Dispersion | 70 x 70° (H x V) @ -6 dB points |
| Maximum SPL | 133 dB peak |
| Crossover Type | Active |
| Transducer | 1 x 15″ (393.5 mm) LF driver 1 x 1″ (25.4 mm) HF compression driver |
| Limiter | Independent HF, LF, peak, and rms |
| Maximum Output Power | 2500 W |
| Type | Class-D |
| Protection | Short circuit, thermal |
| Input/Output | 1 x Combo Jack / XLR 1 x XLR |
| Sensitivity | +4 dBu or +14 dBu software switchable |
| Input Impedance | 40 kOhms balanced |
| Maximum Input Level | +22 dBu |
| Connectivity (RJ-45) | 2 x RJ45 |
| Mains Supply | Neutrik powerCON 20 A |
| DSP | Rotary push-encoder and level control Buttons for Process, Setup, Exit, Enter |
| Display | LCD 128 x 32, blue, backlit |
| Delay | 0 to 300 ms |
| Equalization | High- and low-shelving EQ 2 x parametric EQ Presets: Positioning, Sound mode, FBQ |
| Limiter | Zero-attack input limiter |
| Presets | 20 total presets, 19 user-definable |
| Crossover | High-Pass L-R 24 dB/oct |
| Protection | Lock-out function for all settings |
| Processing | 24-bit, 44.1/48 kHz sample rate (digital) |
| Converter Type | 24-bit, delta-sigma |
| System | Signal 16 channels Latency < 0.9 ms Frequency response 20 Hz to 20 kHz (+0 / -3 dB) Dynamic range typical 92 dB |
| Cabling | Shielded Cat5 Maximum 246′ (75 m) (recommended) |
| Power Consumption | 90 W @ 1/8 max power |
| Voltage | 120 V, 60 Hz (T 15 A H 250 V) |
| Construction | 0.6″ (15 mm) birch plywood |
| Grille | Powder-coated perforated steel |
| Dimensions | 28.0 x 16.9 x 15.2″ (71.2 x 43.0 x 38.5 cm) |
| Weight | 52.0 lb (23.6 kg) |
| Package Weight | 62 lb |
| Box Dimensions (LxWxH) | 29.7 x 21 x 19″ |
No products in the cart. 
Reviews
There are no reviews yet.