Amplify your music at FOH performances with the Turbosound TBV118L-AN 18″ 3000W Powered Subwoofer. This active subwoofer is designed to deliver 3000W power featuring KLARK TEKNIK Class-D technology. It features an 18″ LF driver and uses ULTRANET digital audio networking to connect to compatible mixers and other sources. Designed to work individually without a controller, this subwoofer can be used for applications in a wide range of venues including nightclubs, concert halls, houses of worship, and more.
On the rear panel of the amplifier module, you’ll find the interface’s LCD display and single rotary encoder that provide intuitive access to: position compensation, user EQ control, subwoofer integration, and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy chaining more active subwoofers or for use with active loudspeakers.
Features
- Dual-voice coil design for high-power capacity and extended low-frequency output
- Low-distortion, bass-reflex port design
- Hard wearing semi-matt black paint finish
- Rugged powder-coated perforated steel mesh grille
- Integral suspension hardware for efficient array configuration and aiming
- Multiple M10 mount points allow eyebolt suspension in any orientation
- M20 threaded pole mount to support satellite speaker
- Mains input and link output on Neutrik powerCON connectors
- Fully featured user interface with LCD display for easy navigation
- EASE GLL files provided for EASE Focus Acoustic Simulation Software, which is available for free download
- PC remote control software downloadable at turbosound.com
- ULTRANET connectivity provided by two locking etherCON connectors
- Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single Cat 5 cable
- Durable handles for easy carrying
- Integral suspension system
Specifications
| Configuration | Active Subwoofer |
| Enclosure Type | Bass-Reflex Subwoofer |
| Total Power Capacity | 3000 W |
| Amplifier Class | LF: Class-D |
| LF Driver | 1 x 18″ / 45.72 cm Carbon Fiber Woofer |
| LF Voice Coil | Dual |
| Magnet | Neodymium |
| Frequency Response | 45 Hz to 200 Hz ±3 dB 31 Hz to 300 Hz -10 dB |
| Maximum SPL | 133 dB (Continuous, Peak) |
| Input Sensitivity | Line Input: +1 dBu |
| Max Input Level | +18 dBu (Balanced) |
| I/O Impedance | XLR Line Input: 40 Kilohms (Balanced, Mono) |
| Protections | Short Circuit, Thermal |
| Audio I/O | 1 x Combo XLR-1/4″ TRS Female Balanced/Unbalanced Line Input (Lockable) 1 x XLR 3-Pin Male Balanced Link Thru/Output (Lockable) |
| Network I/O | 2 x RJ45 (Proprietary) In/Out |
| USB | 1 x USB Type-B (Service) |
| Crossover | Active |
| EQ | Yes |
| Parametric EQ | Yes |
| Dynamic Processing | Peak Limiter |
| Alignment Delay | 0 to 300 ms |
| Digital Signal Processing | 24-Bit DSP: User Settings |
| Maximum Sampling Rate | 48 kHz / 24-Bit |
| AC Input Power | Factory Selectable: 100 to 120 VAC, 50 / 60 Hz |
| AC Power Connector | 2 x powerCON Input (Locking) |
| Current Consumption | 20 A (Max) 15 A (Max) |
| Power Consumption | 180 W (Max, 1/8 Power) |
| Mounting | 4 x M100.79″ / 20 mm Fly Point 1 x M20 Pole Socket (Top) |
| Handles | 1 x Each Side |
| Construction Material | Perforated Metal Grille, Plywood |
| Dimensions | to 20.223.5 x 29.6″ / to 59.7 x 75.2 cm |
| Weight | 84.9 lb / 38.5 kg |
No products in the cart. 
Reviews
There are no reviews yet.