The BERLIN TBV123-AN 2-Way 12″ Constant Curvature Loudspeaker from Turbosound is an arrayable 2500W 12″ powered loudspeaker system that is suitable for touring, portable, and installed sound reinforcement applications. Designed to work individually without a controller, the TBV123-AN provides optimal performance for FOH, offstage fill, stereo in-fill, or distributed fill applications in a wide range of venues including nightclubs, concert halls, houses of worship, and more.
The TBV123-AN loudspeaker features a carbon fiber loaded 12″ neodymium low-frequency driver and dual aluminum dome 1″ neodymium motor compression drivers mounted on a 100° horizontal by 15° vertical dispersion constant curvature Dendritic waveguide, which maximizes the direct sound field while reducing reverberant energy.
Features
- Two-way, full-range loudspeaker for touring, portable, and installation applications
- Constant curvature Dendritic waveguide with 100 x 15° (H x V) dispersion for seamless array coverage
- KLARK TEKNIK Class-D technology
- Up to 2500W output power
- KLARK TEKNIK DSP for total system control
- ULTRANET digital audio networking connects to mixers and other sources
- Carbon fiber-loaded 12″ neodymium low-frequency driver with inside/outside wound voice coils
- Dual aluminum dome 1″ neodymium motor compression drivers
- Fully featured user interface with LCD display for ease of navigation
- PC remote control software downloadable at turbosound.com
- 3/4″ plywood enclosure with semi-matte black paint finish
- Integral suspension hardware for efficient array configuration and aiming
- Multiple M10 mount points allow for eyebolt suspension in any orientation
- Dual-angle pole mount for accurate audience coverage
- Rugged powder-coated perforated steel mesh grille
- Mains input and link output on Neutrik powerCON connectors
Specifications
| Frequency Response | 65 Hz to 20 kHz ±3 dB 53 Hz to 20 kHz -10 dB |
| Nominal Dispersion | H x V: 100 x 15° at -6 dB points |
| Maximum SPL | 131 dB peak |
| Crossover Type | Active |
| Transducers | 1 x 12″ / 316 mm LF driver 2 x 1″ / 25.4 mm HF compression drivers |
| Limiter | Independent HF, LF, peak, and rms |
| Maximum Output Power | 2500 W |
| Type | Class-D |
| Protection | Short-circuit, thermal |
| Input | A / B: 1 x combo jack/XLR, 1 x XLR |
| Sensitivity | -2 dBu |
| Input Impedance | 40 kOhms balanced |
| Maximum Input Level | +18 dBu |
| Ultranet Input/Link | 2 x RJ45 / Neutrik etherCON |
| Mains Supply | Neutrik powerCON, 20 A and Link: 15 A |
| DSP | Rotary push-encoder and level control Buttons for process, setup, exit, enter |
| EQ Presets | Factory EQ Presets: Positioning, Array mode, FBQ |
| Display | LCD 128 x 32, blue, backlit |
| Delay | 0 to 300 ms |
| Equalization | High- and low-shelving EQ 2 x parametric EQ |
| Limiter | Zero attack input limiter |
| Presets | 20 total presets, 19 user-definable |
| Crossover | High pass L-R 24 dB/oct |
| Protection | Lock-out function for all settings |
| A/D Conversion | 24-bit, 44.1 / 48 kHz sample rate |
| System | Signal: 16 channels Latency < 0.9 ms |
| Cabling | Cables: Shielded Cat 5 Maximum 246′ / 75 m recommended |
| Current Consumption | Input: 20 maximum Link Output: 15 A maximum |
| Power Consumption | 200 W at 1/8 maximum power for individual product |
| Voltage | USA / Canada/ Japan: 100 to 120 VAC, 50/60 Hz |
| Construction | 3/4″ / 18 mm plywood |
| Grille | Powder-coated perforated steel |
| Suspension / Mounting | Integral Suspension System and 4 x M10 points |
| Dimensions | 13.6 x 23.5 x 15.7″ / 344 x 598 x 398 mm |
| Weight | 50.7 lb / 23 kg |
No products in the cart. 
Reviews
There are no reviews yet.