Experience thunderous bass impact from movie and music soundtracks with the Yamaha NS-SW1000PN 10″ 1000W Subwoofer in piano black.. This dynamic subwoofer features a front-firing 12″ cone woofer and is powered by a capable 1000W amplifier. With a frequency response of 18 to 160 Hz, this subwoofer is designed to handle a wide variety of listening material. Advanced YST II technology is onboard for enhanced sonic accuracy.

The Yamaha NS-SW1000PN offers multiple connection options including direct LFE and line-level inputs. The rear-mounted system control interface allows you to connect the subwoofer to compatible amplifiers for automatic power on and off; a system control cable is included. As an added convenience, this subwoofer features front panel controls, which allow you to easily adjust the subwoofer’s volume level, as well as a power button and LED indicator.



1000W Digital Power Amplifier with a High Current MOSFET Discrete Output Stage

The NS-SW1000 is powered with a 1000W digital amplifier featuring the Yamaha DP200 digital amplifier IC and a high current MOSFET discrete push-pull output stage. Meticulous sound tuning includes the use of a triple-wound Litz wire, high-capacity output coil, and capacitors designed for high performance audio.

12″ Woofer with Double Magnet and Double Damper

The NS-SW1000 uses a 12″ woofer unit with a strong, flexible drive system employing two stacked large diameter ferrite magnets and a double damper with an air vent. The frame is high strength aluminum die cast to suppress unwanted resonance even at high volume, making it possible to reproduce delicate tonal nuances.

Twisted Flare Port

Compared to conventional ports, the Twisted Flare Port is engineered for a greater reduction of air turbulence noise, contributing to clear and accurate low frequency reproduction. The flared and gently twisted shape evenly diffuses the air flow through the port.

Advanced YST II for Awesome Deep Bass

Developed by Yamaha, the Advanced YST II (Yamaha Active Servo Technology II) combines negative-impedance and constant-current principles to drive the speaker cone for tighter control than the previous version. Using advanced negative impedance converter (ANIC) circuits, this system dynamically optimizes effective speaker impedance to maintain linearity. This contributes to a stable and accurate low range response as well as high sound quality.

Auto Power Standby

If no signal is input from the amplifier for a fixed period of time, the subwoofer automatically switches to a standby state. When a signal from the amplifier is detected, power turns on automatically. This is designed to limit energy consumption.

Cabinet and Woofer Design

Yamaha designed the cabinet of the NS-SW1000 with three-way mitered construction joints. This technique ensures extremely tight joints so the entire cabinet behaves as a single unit in effort to provide tight, powerful, and accurate bass reproduction. The cabinet employs a heavy bass reflex enclosure constructed of thick 36mm MDF (medium-density fiberboard) on the baffle sides and 25mm MDF on the other sides. The strong anti-resonant structure with cast-iron legs and front-firing woofer are engineered to deliver impressive sound quality. The specially designed woofer diaphragm is semi-pressed paper incorporating Kevlar fibers for strength and optimal internal losses.

Other Features

  • Low standby power consumption of 0.3 W
  • Auto power standby switch (high, low, and off)
  • Phase control (normal or reverse)
  • High-cut adjustment knob
  • B.A.S.S. (Bass Action Selector System) switch



Subwoofer Type Active
Enclosure Type Bass-Reflex
Amplifier Power Rating 1000 W
Drivers 11.75″ / 30 cm Paper
Ports 1
Frequency Response 18 to 160 Hz
Magnetic Shielding None
Connectivity 1 x RCA Input (LFE)
1 x 1/8″ / 3.5 mm Input (12 V Trigger)
1 x Stereo RCA Input
2 x Binding Post Pair Input
2 x Binding Post Pair Output
Phase Adjustment Yes
AC Input Power 110 to 120 VAC, 60 Hz
Power Consumption 0.3 W (Standby)
170 W (Typical)
Placement & Mounting Options Floorstanding
Floor Contacts Rubber Feet
Cabinet Material MDF
Cable Length Control:
16.4′ / 5 m (1/8″ / 3.5 mm)
Dimensions 17.4 x 18.2 x 20.6″ / 443 x 463 x 522 mm
Weight 93.9 lb / 42.6 kg
Packaging Info
Package Weight 102 lb
Box Dimensions (LxWxH) 24.2 x 22.2 x 22″



Additional information


Reviews (0)


0 Product Ratings

Review this product

Share your thoughts with other customers

Write a review


There are no reviews yet.