-
The 1200W Crown Audio CDi 4|1200 4-Channel DriveCore Series Power Amplifier utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 4|1200 offers streamlined functionality for most large-sized installation such as cinema, houses of worship, hotels, cruise lines, and more. The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 4-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface. The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 4|1200 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.Sku: NCDI4X12-U-EU
Crown Audio CDi 4|1200 4-Channel DriveCore Series Power Amplifier (1200W)
AED 12,723.90 inc. VAT -
The 1200W Crown Audio CDi 4|1200 4-Channel DriveCore Series Power Amplifier utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 4|1200 offers streamlined functionality for most large-sized installation such as cinema, houses of worship, hotels, cruise lines, and more.
The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 4-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface.
The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 4|1200 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.
Sku: NCDI4X12-U-UKCrown Audio CDi 4|1200 4-Channel DriveCore Series Power Amplifier (1200W)
AED 14,057.75 inc. VAT -
The 1200W Crown Audio CDi 4|1200 4-Channel DriveCore Series Power Amplifier with BLU Link utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 4|1200 offers streamlined functionality for most large-sized installation such as cinema, houses of worship, hotels, cruise lines, and more. The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 4-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface. The amplifier is equipped with two BLU Link RJ45 connectors, which can receive and send 256 fault-tolerant audio channels. The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 4|1200 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.Sku: NCDI4X12BL-U-EU
Crown Audio CDi 4|1200BL 4-Channel DriveCore Series Power Amplifier with BLU Link (1200W)
AED 15,948.45 inc. VAT -
The 300W Crown Audio CDi 4|300 4-Channel DriveCore Series Power Amplifier utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 4|300 offers streamlined functionality for most small- to medium-sized installation such as restaurants, retail stores, and more. The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 4-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface. The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 4|300 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.Sku: NCDI4X300-U-EU
Crown Audio CDi 4|300 4-Channel DriveCore Series Power Amplifier (300W)
AED 7,599.90 inc. VAT -
The 300W Crown Audio CDi 4|300 4-Channel DriveCore Series Power Amplifier utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 4|300 offers streamlined functionality for most small- to medium-sized installation such as restaurants, retail stores, and more.
The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 4-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface.
The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 4|300 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs
Sku: NCDI4X300-U-UKCrown Audio CDi 4|300 4-Channel DriveCore Series Power Amplifier (300W)
AED 7,953.16 inc. VAT -
The 300W Crown Audio CDi 4|300 4-Channel DriveCore Series Power Amplifier with BLU Link utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 4|300 offers streamlined functionality for most small- to medium-sized installation such as restaurants, retail stores, and more. The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 4-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface. The amplifier is equipped with two BLU Link RJ45 connectors, which can receive and send 256 fault-tolerant audio channels. The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 4|300 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.Sku: NCDI4X300BL-U-EU
Crown Audio CDi 4|300BL 4-Channel DriveCore Series Power Amplifier with BLU Link (300W)
AED 7,700.70 inc. VAT -
The 300W Crown Audio CDi 4|300 4-Channel DriveCore Series Power Amplifier with BLU Link utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 4|300 offers streamlined functionality for most small- to medium-sized installation such as restaurants, retail stores, and more.
The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 4-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface. The amplifier is equipped with two BLU Link RJ45 connectors, which can receive and send 256 fault-tolerant audio channels.
The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 4|300 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.
Sku: NCDI4X300BL-U-UKCrown Audio CDi 4|300BL 4-Channel DriveCore Series Power Amplifier with BLU Link (300W)
AED 9,242.86 inc. VAT -
The 600W Crown Audio CDi 4|600 4-Channel DriveCore Series Power Amplifier utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 4|600 offers streamlined functionality for most medium-sized installation such as cinema, houses of worship, bars, lounges, and more. The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 4-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface. The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 4|600 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.Sku: NCDI4X600-U-EU
Crown Audio CDi 4|600 4-Channel DriveCore Series Power Amplifier (600W)
AED 10,978.80 inc. VAT -
The 600W Crown Audio CDi 4|600 4-Channel DriveCore Series Power Amplifier utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 4|600 offers streamlined functionality for most medium-sized installation such as cinema, houses of worship, bars, lounges, and more.
The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 4-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface.
The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 4|600 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.
Sku: NCDI4X600-U-UKCrown Audio CDi 4|600 4-Channel DriveCore Series Power Amplifier (600W)
AED 10,994.73 inc. VAT -
The 600W Crown Audio CDi 4|600 4-Channel DriveCore Series Power Amplifier with BLU Link utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 4|600 offers streamlined functionality for most medium-sized installation such as cinema, houses of worship, bars, lounges, and more.
The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 4-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface. The amplifier is equipped with two BLU Link RJ45 connectors, which can receive and send 256 fault-tolerant audio channels.
The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 4|600 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.
Sku: NCDI4X600BL-U-UKCrown Audio CDi 4|600BL 4-Channel DriveCore Series Power Amplifier with BLU Link (600W)
AED 12,286.56 inc. VAT -
 It delivers 2100W per channel at 4 Ohms, and supports multiple low-impedance configurations, as well as 70V and 140V constant-voltage systems. The switch-mode universal power supply enables safe operation across the globe. Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. The CDi 6000 also has integrated DSP presets for adjustable crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. A backlit LCD displays relevant information. The removable Euroblock inputs and barrier strip outputs accommodate a variety of system setups.Sku: NCDI6000E60
Crown Audio CDi 6000 Two-Channel Commercial Amplifier
AED 14,469.00 inc. VAT -
The CT4150, part of the ComTech DriveCore series from Crown Audio, is a 4-channel power amplifier that offers professional audio quality in a slim design. The amplifier has a 1 RU chassis, allowing you to install it in any standard equipment rack. It provides 125W per channel into 8 ohms for strong, clear audio with low distortion. DriveCore technology provides excellent efficiency of over 90% for a fantastic performance to power ratio. It does not require a cooling fan, providing silent operation. The amplifier offers flexible input routing, allowing you to send an input signal to any of the 4 outputs. Integrated Life-Safety features and patented feedback and protection circuitry protect the amplifier from damage to ensure a lifetime of reliable operation. A universal power supply lets you use the amplifier internationally, ideal for touring applications.Sku: NCT4150A-U-UK
Crown Audio CT | 4150 4-Channel Rackmount Power Amplifier (125W/Channel at 8 Ohms)
AED 5,705.00 inc. VAT -
Powering this remarkable amplifier is the pioneering technology of DriveCore™, which integrates the amplifier drive stage into the power output stage fusing everything into a chip the size of a dime. DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics. The end result is an audio amplifier circuit that exhibits the exemplary audio quality of a highly evolved Class AB design.Sku: NCT475A-U-UK
Crown Audio CT | 475A-U 4-Channel, 75W Power Amplifier
AED 4,297.72 inc. VAT -
Powering this remarkable amplifier is the pioneering technology of DriveCore™, which integrates the amplifier drive stage into the power output stage fusing everything into a chip the size of a dime. DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics. The end result is an audio amplifier circuit that exhibits the exemplary audio quality of a highly evolved Class AB design.Sku: NCT8150A-U-EU
Crown Audio CT | 8150A-U 8-Channel, 125W Power Amplifier
AED 9,775.18 inc. VAT -
Powering this remarkable amplifier is the pioneering technology of DriveCore™, which integrates the amplifier drive stage into the power output stage fusing everything into a chip the size of a dime. DriveCore's front-end drive circuits leverage the inherent efficiency of Class D output stages while also maintaining superb sonic characteristics. The end result is an audio amplifier circuit that exhibits the exemplary audio quality of a highly evolved Class AB design.
Sku: NCT875A-U-EUCrown Audio CT | 875A-U-US Com Tech DriveCore 8-channel, 75W Power Amplifier
AED 6,842.61 inc. VAT -
The DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.
Sku: DCI2X1250-U-EKFXCrown Audio DCi 2|1250 Two-channel, 1250W Analog Power Amplifier
AED 12,888.42 inc. VAT -
The DriveCore Install Series Amplifier is based on the proprietary DriveCore technology.It is designed as per industry standards and provides system integrators with features and flexibility required for challenging various sound applications. The amplifier can be easily integrated into a control system.Its internal cooling fans provide airflow to various heat-generating parts. Incorporating the fans into the amplifier brick design maximizes cooling.
Sku: DCI4X1250-U-EKFXCrown Audio DCI2 | 1250-U-EKFX 4-Channel, 1250W Power Amplifier
AED 19,981.78 inc. VAT -
The 2RU DCi 2|1250N Two-Channel Power Amplifier with BLU link from Crown Audio is a two-channel high-performance power amplifier with BLU link from the DriveCore Install Network Series which delivers 1250W of power at 4 Ohms. It is rack-mountable and is recommended for installed sound, cinema, and recording broadcast.
Sku: DCI2X1250N-U-EKFXCrown Audio DCI2 | 1250N-U-EKFX 2-Channel 1250W Power Amplifier
AED 16,155.67 inc. VAT -
The Crown Audio DriveCore Install 2|2400N is a 2400W, 2-channel, BLU Link network amplifier with advanced features and flexibility that's required by system integrators for challenging 21st century installed sound applications.
The 2/2400N can produce up to 2400W of output per channel at 2, 4, 8 or 16 ohms or 70 or 100 volts rms. It is compatible with Harman's BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ-45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The 2|2400N also has built-in DSP capabilities including limiting, input/output EQs, delay, and a matrix mixer.
Its two channels can be bridged for powering higher power applications such as a subwoofer. The 2|2400N also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 2 channels additionally features independent attenuators, ranging from 0 to -80 dB.
The front panel of the 2|2400N provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use. The 2|2400N is rack-mountable and requires 2 RU of space. A 20A IEC power cord is included.Sku: DCI2X2400N-U-EKFXCrown Audio DCI2 | 2400N-U-EKFX 2-Channel 2400W Power Amplifier
AED 25,569.96 inc. VAT -
SaleThe DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications.Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.TRUE RACK DENSITY – Power points of 300W or 600Win 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.Sku: DCI2X300-U-EKFX
Crown Audio DCI2 | 300-U-EKFX 2-Channel 300W Analog Power Amplifier
AED 5,803.66Original price was: AED 5,803.66.AED 5,554.50Current price is: AED 5,554.50. inc. VATAED 5,803.66Original price was: AED 5,803.66.AED 5,554.50Current price is: AED 5,554.50. inc. VAT Add to cart -
The Crown Audio DCI 2|300N is a 300W DriveCore Install 2-channel BLU Link network amplifier with advanced features and flexibility that's required by system integrators for challenging 21st century installed sound applications.
The 2/300N can produce up to 300W of output per channel at 2, 4, 8 or 16 ohms or 70 or 100 Vrms. It is compatible with Harman's BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The 2|300N also has built-in DSP capabilities including limiting, input/output EQs, delay, and a matrix mixer.
Its two channels can be bridged for powering higher power applications such as a subwoofer. The 2|300N also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 2 channels additionally features independent attenuators with an attenuation range from 0 to -80 dB.
The front panel of the 2|300N provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use. The 2|300N is rack-mountable and requires 2 RU of space.Sku: DCI2X300N-U-EKFXCrown Audio DCI2 | 300N-U-EKFX 2-Channel 200W Power Amplifier
AED 8,589.42 inc. VAT -
The 600W Crown Audio CDi 2|600 2-Channel DriveCore Series Power Amplifier utilizes technology derived from the flagship Crown DriveCore Install series amplifiers, providing an impressive mix of high-performance, rich feature set, and competitive cost. The CDi DriveCore 2|600 offers streamlined functionality for most medium-sized installation such as cinema, houses of worship, bars, lounges, and more.
The DriveCore integrated circuit eliminates hundreds of components within the amplifier, reducing the variability of component values and increasing reliability, resulting in remarkable audio fidelity from an efficient design. The 2-channel amplifier is simple to use and includes a network control & monitoring, an advanced DSP circuit, and an easy-to-use, front-panel interface.
The amplifier is capable of driving up to 100Vrms speaker loads without requiring a transformer and comes pre-loaded with JBL speaker tunings to help make installations quicker and easier. The CDi 2|600 features an Ethernet port for using HARMAN's HiQnet Audio Architect software for configuration and operation over a standard TCP/IQ network. The rear panel includes terminal block inputs and barrier strip outputs.
Sku: DCI2X600-U-EKFXCrown Audio DCI2 | 600-U-EKFX 2-Channel, 600W Analog Power Amplifier
AED 8,589.42 inc. VAT -
The Crown Audio DCI 2|600N is a 600W, DriveCore Install 2-channel BLU Link network amplifier with advanced features and flexibility that's required by system integrators for challenging 21st century installed sound applications.
The 2/600N can produce up to 600W of output per channel at 2, 4, 8 or 16 ohms or 70 or 100 Vrms. It is compatible with Harman's BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The 2|600N also has built-in DSP capabilities including limiting, input/output EQs, delay, and a matrix mixer.
Its two channels can be bridged for powering higher power applications such as a subwoofer. The 2|600N also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 2 channels additionally features independent attenuators with an attenuation range from 0 to -80 dB.
The front panel of the 2|600N provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use. The 2|600N is rack-mountable and requires 2 RU of space.Sku: DCI2X600N-U-EKFXCrown Audio DCI2 | 600N-U-EKFX 2-Channel 600W Power Amplifier
AED 11,160.22 inc. VAT -
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport. This amplifier is EN 54-16 Compliant for life safety applications.
Sku: DCI4X1250DA-U-EKFXCrown Audio DCI4 | 1250DA-U-EKFX Dante-enabled With Four Channel DSP Amplifier
AED 24,065.84 inc. VAT -
System integrators working on challenging 21st century installed sound applications require equipment that is versatile, compact, and highly efficient. Look no further than the 4-channel Crown Audio DCI 4|1250N, a 1250W DriveCore Install BLU Link network amplifier with advanced features and flexibility. The amplifier provides analog and digital inputs, network monitoring and control, programmable General Purpose Input/Output (GPIO) ports, and on-board Digital Signal Processing (DSP). The amplifier also meets EN 54-16 compliance for life safety systems to serve the needs of hospitality, large venues, and other markets.
The 2 RU 4/1250N can produce up to 1250W of output per channel at 2, 4, 8, or 16 ohms or 70 or 100 Vrms. It is compatible with Harman's BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ-45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The built-in DSP capabilities include limiting, input/output EQs, delay, and a matrix mixer.
Each channel pair can be bridged for powering higher power applications such as a subwoofer. The 4|1250N also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 4 channels additionally features independent attenuators with a range from 0 to -80 dB.
The front panel of the 4|1250N provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use.Sku: DCI4X1250N-U-EKFXCrown Audio DCI4 | 1250N-U-EKFX 4-Channel 1250W Power Amplifier
AED 24,065.84 inc. VAT -
System integrators working on challenging 21st century installed sound applications require equipment that is versatile, compact, and highly efficient. Look no further than the 4-channel Crown Audio DCI 4|1250ND, a 1250W DriveCore Install AVB network display amplifier with advanced features and flexibility. The amplifier provides analog and digital inputs, network monitoring and control, programmable General Purpose Input/Output (GPIO) ports, and on-board Digital Signal Processing (DSP).
The 2 RU 4/1250ND can produce up to 1250W of output per channel at 2, 4, 8, or 16 ohms or 70 or 100 Vrms. It is equipped with AVB technology, which provides consistent audio and information delivery and is certified by the AVnu Alliance. This digital control allows for networked monitoring, recallable presets. The built-in DSP capabilities include limiting, input/output EQs, delay, and a matrix mixer.
Each channel pair can be bridged for powering higher power applications such as a subwoofer. The 4|1250ND also has channel-independent high- or low-impedance output that is selectable from onboard LCD screen. This allows you to integrate the amplifier into a variety of different setups.
The front panel of the 4|1250ND provides a series of system indicators, including signal and fault alerts for quick visual monitoring of the system. The LCD screen with the font-panel control knob allows you to enable and select presets and DSP functions in addition to level clip and thermal information. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use.Sku: DCI4X1250ND-U-EKFXCrown Audio DCI4 | 1250ND-U-EKFX 4-Channel 1250W Power Amplifier
AED 26,472.43 inc. VAT -
System integrators working on challenging 21st century installed sound applications require equipment that is versatile, compact, and highly efficient. Look no further than the 4-channel Crown Audio DCI 4|2400N, a 2400W DriveCore Install BLU Link network amplifier with advanced features and flexibility. The amplifier provides analog and digital inputs, network monitoring and control, programmable General Purpose Input/Output (GPIO) ports, and on-board Digital Signal Processing (DSP). The amplifier also meets EN 54-16 compliance for life safety systems to serve the needs of hospitality, large venues, and other markets.
The 2 RU 4/2400N can produce up to 2400W of output per channel at 2, 4, 8 or 16 ohms or 70 or 100 Vrms. It is compatible with Harman's BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ-45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The built-in DSP capabilities include limiting, input/output EQs, delay, and a matrix mixer.
Each channel pair can be bridged for powering higher power applications such as a subwoofer. The 4|2400N also has channel-independent, high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 4 channels additionally features independent attenuators with a range from 0 to -80 dB.Sku: DCI4X2400N-U-EKFXCrown Audio DCI4 | 2400N-U-EKFX 4-Channel 2400W Power Amplifier
AED 38,680.32 inc. VAT -
The Drive Core™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.TRUE RACK DENSITY – Power points of 300W or 600Win 2-/4-/8-channel configurations – all in a 2 Rack Unit form factor. More channels in one box allow smaller infrastructure rooms that can reduce operational costs while giving you the utmost in installation flexibility.
Sku: DCI4X300-U-EKFXCrown Audio DCI4 | 300-U-EKFX 4-Channel, 300W Power Amplifier
AED 9,450.18 inc. VAT -
The Crown DCi 4/300DA DriveCore Install DA Series is a 4-channel power amplifier with Dante / AES67 networked audio and integrated DSP. The amplifier is capable of producing 300W of output per channel and works with 2-, 4-, 8-, and 16-Ohm speakers or with 70/100Vrms systems. Channels can be bridged for powering higher power applications such as a subwoofer.
The amp's advanced capabilities and support for Dante Domain Manager makes it well suited for installations that are standardized on Dante for networked audio transport. The Dante / AES67 ports provide primary and secondary connections for redundancy and will accept 48 and 96 kHz digital audio. Analog audio can be sent via Dante / AES67 pre/post processing (at 48 kHz). Network configuration, monitoring, and control are provided with HiQnet protocols over standard TCP/IP network connections. The HiQnet Audio Architect software allows for remote configuration, monitoring, and control of all aspects of the DCi-DA Series amplifiers. Additionally, a programmable General Purpose Input/Output (GPIO) port can be configured to control volume, recall presets, report errors to a third-party control system, and more.
The integrated DSP provides a comprehensive set of tools and features including LevelMAX limiting for inputs and outputs with thermal limiting, input compression, input & output delay (up to 2 seconds), input & output EQ, crossover settings, and a signal generator. The Crown DCi 4/300DA DriveCore Install DA Series 4-Channel Amplifier ships with four input connectors and a power cord.
Sku: DCI4X300DA-U-EKFXCrown Audio DCI4 | 300DA-U-EKFX Dante-AES67 With 4-Channel DSP Amplifier
AED 13,103.37 inc. VAT -
System integrators working on challenging 21st century installed sound applications require equipment that is versatile, compact, and highly efficient. Look no further than the Crown Audio DCI 4|300N , a 300W DriveCore Install 4-channel BLU Link network amplifier with advanced features and flexibility. The amplifier provides analog and digital inputs, network monitoring and control, programmable General Purpose Input/Output (GPIO) ports, and on-board Digital Signal Processing (DSP). The amplifier also meets EN 54-16 compliance for life safety systems to serve the needs of hospitality, large venues, and other markets.
The 2 RU 4/300N can produce up to 300W of output per channel at 2, 4, 8 or 16 ohms or 70 or 100 Vrms. It is compatible with Harman's BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ-45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The built-in DSP capabilities include limiting, input/output EQs, delay, and a matrix mixer.Sku: DCI4X300N-U-EKFXCrown Audio DCI4 | 300N-U-EKFX 4-Channel 300W Power Amplifier
AED 13,103.37 inc. VAT -
The DCI 4/600 DriveCore Install Analog Series from Crown Audio is a 4-channel amplifier capable of producing 600 watts of output per channel and works with 2, 4, 8, and 16 Ohms or 70 or 100 Vrms. Channels can be bridged for powering higher power applications such as a subwoofer. The 4/600 also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 4 channels additionally features independent attenuators with an attenuation range from 0 to -80 dB.
The front panel of the 4/600 provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use. The 4/600 is 2U rackmountable and ships with 4 male connectors for wiring and an IEC power cord.
Sku: DCI4X600-U-EKFXCrown Audio DCI4 | 600-U-EKFX DriveCore Install Analog Series 4-Channel Amplifier
AED 14,178.12 inc. VAT -
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport.
Sku: DCI4X600DA-U-EKFXCrown Audio DCI4 | 600DA-U-EKFX 600W With 4-Channel Amplifier
AED 18,262.17 inc. VAT -
System integrators working on challenging 21st century installed sound applications require equipment that is versatile, compact, and highly efficient. Look no further than the 4-channel Crown Audio DCI 4|600N, a 600W DriveCore Install BLU Link network amplifier with advanced features and flexibility. The amplifier provides analog and digital inputs, network monitoring and control, programmable General Purpose Input/Output (GPIO) ports, and on-board Digital Signal Processing (DSP). The amplifier also meets EN 54-16 compliance for life safety systems to serve the needs of hospitality, large venues, and other markets.
The 2 RU 4/600N can produce up to 600W of output per channel at 2, 4, 8 or 16 ohms or 70 or 100 Vrms. It is compatible with Harman's BLU Link digital audio transport and accepts digital inputs via its rear-panel RJ-45 connectors. This digital control allows for networked monitoring, recallable presets, and the setup of secondary inputs that engage if the primary inputs fail. The built-in DSP capabilities include limiting, input/output EQs, delay, and a matrix mixer.
Each channel pair can be bridged for powering higher power applications such as a subwoofer. The 4|600N also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 4 channels additionally features independent attenuators with a range from 0 to -80 dB.Sku: DCI4X600N-U-EKFXCrown Audio DCI4 | 600N-U-EKFX 4-Channel 300W Power Amplifier
AED 18,262.17 inc. VAT -
The Crown Audio DCi 8|300 DriveCore Install Analog Series is an 8-channel amplifier capable of producing 300 watts of output per channel and works with 2, 4, 8, and 16 Ohms or 70 or 100 Vrms. Channels can be bridged for powering higher-power applications such as a subwoofer. The DCi 8|300 also has channel-independent high- or low-impedance output that is selectable from the rear-panel DIP switches. This allows you to integrate the amplifier into a variety of different setups. Each of its 8 channels additionally features independent attenuators with an attenuation range from 0 to -95 dB.
The front panel of the DCi 8|300 provides a series of system indicators, including level and signal, ready, clip, thermal, and fault alerts for quick visual monitoring of the system. The unit can be integrated into a control system for powering on and off as well as engaging its sleep mode for saving energy when not in use. The DCi 8|300 is 2 RU rackmountable and ships an IEC power cord.
Sku: DCI8X300-U-EKFXCrown Audio DCI8 | 300-U-EKFX 8-Channel, 300W Analog Power Amplifier
AED 18,907.02 inc. VAT -
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport. This amplifier is EN 54-16 Compliant for life safety applications.
Sku: DCI8X300DA-U-EKFXCrown Audio DCI8 | 300DA-U-EKFX 300W 8-Channel Power Amplifier
AED 23,644.53 inc. VAT -
The 300W, high-performance Crown Audio DCI8300N 8-Channel DriveCore Install Series Network Amplifier is designed for system integrators looking for 21st century advanced features for installed sound applications. The amplifier utilizes Harman DriveCore technology, featuring a patented integrated circuit that combines hundreds of discrete circuits into a single chip for lower power, better performance, and improved reliability. The Class-D amplifier works with impedance loads from 2 to 16 ohms plus 70/100V speakers. The rear panel sports two BLU link connectors capable of delivering 256 channels of digital audio over a standard Cat 5e cable. Additionally, a standard Ethernet connector provides HiQnet Audio Architect control via a Cat 5e port, while the programmable GPIO control port allows for control from analog components such as volume dials. The onboard digital signal processor provides input/output EQ filters, crossovers, time-alignment delay, and LevelMAX limiters for outstanding protection. Additional protection circuits include shorted outputs, DC, mismatched loads, overheating, over- or under-voltage, and high-frequency overload. The DCI8300N ships with a power cord.Sku: DCI8X300N-U-EKFX
Crown Audio DCI8 | 300N 8-Channel DriveCore Install Series Network Amplifier (300W)
AED 25,980.05 inc. VAT -
The new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore™ technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.Sku: DCI8X600-U-EKFX
Crown Audio DCI8 | 600-U-EKFX 8-Channel 600W Analog Power Amplifier
AED 29,414.84 inc. VAT -
For applications that require Dante or AES67 networked audio, the Crown DriveCore Install DA Series provides a balanced combination of output power, channel count and speaker load flexibility along with proprietary DriveCore® technology for superb efficiency and exemplary audio quality. The DCi DA Series includes a high-powered DSP with JBL speaker tunings, network control/monitoring, and the ability to drive 2/4/8/16 ohm, 70V and 100V speaker loads. The amp’s advanced capabilities and support for Dante Domain Manager makes it perfect for installations that have standardized on Dante for networked audio transport. This amplifier is EN 54-16 Compliant for life safety applications.
Sku: DCI8X600DA-U-EKFXCrown Audio DCI8 | 600DA-U-EKFX 600W 8-Channel Power Amplifier
AED 35,243.25 inc. VAT -
The DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications. Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.
Sku: DCI8X600N-U-EKFXCrown Audio DCI8 | 600N-U-EKFX 8-Channel 600W Analog Power Amplifier
AED 35,243.25 inc. VAT -
The new DriveCore™ Install series amplifiers is a complete line of high performance installation amplifiers based on the proprietary DriveCore™ technology. DCi Series amplifiers are designed, engineered and manufactured to the industry’s highest quality standards, and provide system integrators with the advanced features and flexibility required for challenging 21st century installed sound applications.Versatile, compact and highly energy-efficient, DCi Series amplifiers continue the unbroken Crown tradition of leadership in professional and commercial power amplifier technology.
Sku: DCI8X600ND-U-EKFXCrown Audio DCI8 | 600ND-U-EKFX 8-Channel 600W Power Amplifier
AED 38,767.59 inc. VAT -
Cinema managers and integrators looking to maximize their power investment and future-proof their systems will be thrilled with the DSi-Series MA4, a 700W 4-channel power amplifier that's designed for JBL cinema loudspeakers offering outstanding quality and performance in a rack-mountable enclosure. The amplifier features a remarkable 96 kHz/32-bit digital signal processing with delay, 8-band parametric EQ, crossovers, FIR processing, LevelMAX limiting, and more. The integrated DriveCore technology incorporates hundreds of amplifier components into a single chip for superior efficiency and reliability. With its updated design, the MA4 allows for high power output at 2 ohms, enabling up to four surround speakers to be powered by a single channel. There are built-in cinema speaker tuning presets that match all JBL cinema loudspeakers for optimal performance, protection, and easy deployment. The font panel features an LCD and encoder to configure amplifier settings and mute channels at the touch of a button. The rear panel provides four analog inputs via two Euroblock connectors and two terminal strip speaker outputs to connect up to four speakers. A HiQnet (RJ45) port allows the amplifier to connect with HARMON Audio Architect control software over a standard TCP/IP network. A GPIO/AUX port allows you to externally recall presets, mute channels, monitor amplifier health and power the amplifier on or off.in AmplifiersSku: MA4-EK
Crown Audio DSi 2.0 Series MA4 700W 4-Channel Amplifier for JBL Cinema Loudspeakers
AED 16,538.81 inc. VAT -
Cinema managers and integrators looking to maximize their power investment and future-proof their systems will be thrilled with the DSi-Series MA4-D, a 700W 4-channel power amplifier that's designed for JBL cinema loudspeakers offering outstanding quality and performance in a rack-mountable enclosure. The amplifier features a remarkable 96 kHz/32-bit digital signal processing with delay, 8-band parametric EQ, crossovers, FIR processing, LevelMAX limiting, and more. The integrated DriveCore technology incorporates hundreds of amplifier components into a single chip for superior efficiency and reliability. With its updated design, the MA4-D allows for high power output at 2 ohms, enabling up to four surround speakers to be powered by a single channel. There are built-in cinema speaker tuning presets that match all JBL cinema loudspeakers for optimal performance, protection, and easy deployment. The font panel features an LCD and encoder to configure amplifier settings and mute channels at the touch of a button. The rear panel provides four analog inputs via two Euroblock connectors and two terminal strip speaker outputs to connect up to four speakers. A HiQnet (RJ45) port allows the amplifier to connect with HARMON Audio Architect control software over a standard TCP/IP network. A GPIO/AUX port allows you to externally recall presets, mute channels, monitor amplifier health and power the amplifier on or off. The MA4-D includes DANTE/AES67 support for seamless integration with Dolby Atomos Connect and other interfacesin AmplifiersSku: MA4-D-EK
Crown Audio DSi 2.0 Series MA4-D 700W 4-Channel Amplifier for JBL Cinema Loudspeakers (Dante)
AED 18,406.01 inc. VAT -
Cinema managers and integrators looking to maximize their power investment and future-proof their systems will be thrilled with the DSi-Series SA4-D, a 350W 4-channel power amplifier that's designed for JBL cinema loudspeakers offering outstanding quality and performance in a rack-mountable enclosure. The amplifier features a remarkable 96 kHz/32-bit digital signal processing with delay, 8-band parametric EQ, crossovers, FIR processing, LevelMAX limiting, and more. The integrated DriveCore technology incorporates hundreds of amplifier components into a single chip for superior efficiency and reliability. With its updated design, the SA4-D allows for high power output at 2 ohms, enabling up to four surround speakers to be powered by a single channel. There are built-in cinema speaker tuning presets that match all JBL cinema loudspeakers for optimal performance, protection, and easy deployment. The font panel features an LCD and encoder to configure amplifier settings and mute channels at the touch of a button. The rear panel provides four analog inputs via two Euroblock connectors and two terminal strip speaker outputs to connect up to four speakers. A HiQnet (RJ45) port allows the amplifier to connect with HARMON Audio Architect control software over a standard TCP/IP network. A GPIO/AUX port allows you to externally recall presets, mute channels, monitor amplifier health and power the amplifier on or off. The LA4-D includes DANTE/AES67 support for seamless integration with Dolby Atomos Connect and other interfaces.in AmplifiersSku: SA4-D-EK
Crown Audio DSi 2.0 Series SA4-D 350W 4-Channel Amplifier for JBL Cinema Loudspeakers Dante
AED 12,996.10 inc. VAT -
The Crown DSi 8Mn is a projection booth monitor designed to work with digital cinema systems using the Crown DSi Series amplifiers. The unit is designed to meet remote-level and remote-audio monitoring requirements and expands upon the standard booth monitor to allow network monitoring of cinema audio for quality control purposes.
Network monitoring of a large network operations center allows the manager to monitor auditorium audio from the office. The DSi 8Mn also serves the standard booth monitor purpose of allowing listening to various audio channels through the front-panel speaker or headphones.
The front panel and a web browser provide all the controls necessary for the daily operation of the DSi 8Mn. Controls are easily accessible from the front panel or from a web browser interface. Eight-channel monitoring allows you to monitor either the inputs from the cinema processor or the power amplifier’s outputs: L,C, R, Ls, Rs, Lrs, Rrs, and LFEs in any combination.
The rear panel provides Phoenix and HD-15 connectors for quick connection to power amplifiers. All inputs and outputs are balanced, and the unit features a universal power supply. There are no special tools required for installation. The built-in VU meter test jack provides the technician with immediate information about the status of the DSi 8Mn and all power amplifiers. The DSi 8Mn includes a power cord.
Sku: NDSI8MNCrown Audio DSi 8Mn Projection Booth Monitor for Network Digital Cinema Systems
AED 11,797.14 inc. VAT -
Crown Audio DSi-6000 2-Channel Solid-State Power Amplifier has presets for industry-standard JBL loudspeaker systems, which are set up quickly and easily thanks to an intuitive backlit LCD. Also switch to our store Sound Town Electronics for more affordable products at amazing price that you are actually looking for. A USB connection allows you to connect to a computer to configure HiQnet System Architect software. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. A rear-panel HD-15 connector provides connectivity between DSi amplifiers and the DSi-8M System Monitor. The switch-mode universal power supply gives the DSi-6000 terrific power flexibility.Sku: NDSI6000E60
Crown Audio DSi6000 2-Channel Solid-State Power Amplifier
AED 14,707.34 inc. VAT -
he 135MA from Crown Audio is a professional-quality mixer/amplifier designed for commercial applications, such as paging, background music, and music-on-hold systems. It has 3 inputs, each with a volume control, and a 35W amplifier output. Signals can be input via the balanced Phoenix or stereo RCA inputs. Output can be via 8 Ohm or 70/100V constant voltage outputs. A telephone output is also provided. The mixer/amplifier features priority muting, which can be achieved by VOX or an external switch. The master output has a front-panel level control knob, as well as individual bass and treble controls. All of these terrific features are packed into a compact housing with a weight under 10 pounds.Sku: G135MAE60
Crown Audio G135MAE60 3×1 35W Commercial Mixer/Amplifier
AED 1,123.50 inc. VAT -
Each channel features a complete compliment of OMNIDRIVEHD™ Processing, including the acclaimed LevelMAX™ Limiter Suite, and support for linear phase FIR filters as used in the latest JBL V5 loudspeaker tunings. Combine that with Crown’s patented Class-I technology delivering uncompromising power output across all four channels, and it’s easy to see why the I-Tech 4x3500HD is the flagship tour sound amplifier from Crown.
Sku: 4X3500HDB-U-EKFXCrown Audio I-Tech 43500HD 4-Channel, 4000W Power Amplifier
AED 40,772.26 inc. VAT -
Power your stage in style with the technologically advanced Crown I-Tech 4x3500HD power amplifier. The I-Tech 4x3500HD is a professional-level touring amplifier designed for the rigors of the road. This amp is so groundbreaking that its technology features five new patents, three of which are on the power supply. Crown's new BSS OMNIDRIVEHD processing engine is at the heart of the I-Tech HD amps. With four times the processing power, the I-Tech 4x3500HD features Linear Phase FIR filters and LevelMAX limiters for precise and crystal-clear sound. A color LCD screen rounds out the I-Tech 4x3500HD’s cutting-edge feature set.
Sku: 4X3500HDS-U-EKFXCrown Audio I-Tech 4x3500HDs Power Amplifier with Binding Posts
AED 40,772.26 inc. VAT