Shop

2 x EL84 power tubes combine with 3 x ECC83/12AX7 pre-amp tubes to deliver 15W RMS power with natural drive and warmth. Opt for either the full 15 watts RMS power or <1W power. <1W is ideal for recording and practice without sacrificing tone; 15W allows for stage-ready volume levels. HH custom-designed 12” drivers with open-back cabinet speakers for dynamic, responsive interaction with tube amplifier; integrated tilt stand under the cabinet enhances projection and tonal variation. Independent Gain and Volume control allows preamp drive to be balanced with the output level, progressing from warm cleans to rich overdrives. 3-band tone stack with Bass, Middle and Treble controls; ‘Tone’ control the overall top-end response, reduce upper-end harmonics on the output and pre-amplifier overdrive.

The CUB 8 is a brand new, all tube guitar amp with its roots fairly and squarely back in the very beginning of tube amp production. The design ethos behind the CUB amps is 'Small is Beautiful!' There are plenty of situations when small is king and having an amplifier like the CUB 8 allows you to get 'THAT' vintage sound. The CUB 8 features a classic single-ended Class A design, and is loaded with a single ECC83 in the pre amp section and a single 6V6GT in the output section generating 5 watts RMS of vintage tube tone. The CUB 8's control panel is simplicity personified - a tone control, a volume control, Hi and LO input and that's your lot. The CUB 8 houses an 8" Celestion driver. Using a CUB 8 is straightforward, plug in, dial in your tone and wind the volume up a little and the 6V6GT's respond in a bright, bouncy and brilliant fashion. Drive the output section harder and the increased 2nd and 3rd order harmonics give the tone a pronounced bottom end and a lovely lower mid.

The IRT-Studio-SE offers the same classic tones as the big Ironheart amps, but in a low-power, compact, and lightweight design. Equipped with ECC83 Preamp valves and EL84 output valves, the IRT-Studio amp delivers 15W of pure tonal power, with the option to switch to less than 1W via the second input for times when loud volumes aren’t permitted. Even with is compact design, the amp head still offers 3 channels and a wide range of control to dial in the perfect tone for any situation. Its 3 band EQ features push/pull EQ shift functions, extended the frequency ranges for further tone shaping, while the dynamics, tone, and reverb controls allow players to give their sound a personal touch.

Along with its incredible tonal capabilities, the Ironheart Studio features a variety of ins/outs to seamlessly integrate into existing rigs. Its D.I. output is perfect for directly connecting the amp head to DAWs, PAs, and mixing consoles, and features a high-quality speaker emulator to deliver all valve tones to your DAW or PA, or even both at the same time. The amp is also equipped with an internal dummy load, removing the need to connect an external speaker and deliver a truly silent recording. The FX loop is idea for connecting your favourite stompboxes, and the Aux in is perfect for playing along to backing tracks and songs.

The Laney Ironheart IRT120H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It's loaded with four premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.

One of the coolest features of the IRT120H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You'll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.

The Laney IRT15H-2 15W tube guitar amp head delivers a single Ironheart channel that's flavored with 12AX7 (preamp) and EL84 (power amp) tubes. For when 15W is too much, there's also a 1W guitar input. Other features include high-quality digital reverb, an FX loop with variable level control and a DI output.

The new IRONHEART  2 x 12" combo - the IRT60-212 bangs out 60 watts RMS of all ECC83 & 6L6 valve tone with masses of gain and like its metal relatives - such as the Laney KLIPP and the Laney AOR hits you hard between the eyes like a power hammer from hell!

The Combo houses three sonically distinct channels: - Clean, Rhythm & Lead all with independent level controls. The Clean and the Rhythm channels share a 3- band EQ with pull-push shift features on each control that gives you total control over your sound allowing you to dial in that killer tone. 

The IRT60-212's Lead channel has an independent 3- band EQ with pull-push shift features on each control allowing for some radical lead tones.

The Pre Boost feature makes the need to carry additional boost pedals redundant! Something any gigging player will admit is a great feature.  On the IRT60-212 the footswitchable Pre Boost works just like kicking in your favourite boost pedal right before your amp.  It's available where ever you are on the preamp and can be switched in or out via the supplied footswitch.

A standout feature of the IRT60-212 range is the WATTS control in the master section.  This allows you to really screw down the output of the IRT60-212's 2 x 6L6 output section, down to less than 1 watt!  Great for getting the sound of a full -blown metal head at bedroom levels.

Combine this with a Dynamics control which tightens up you low end when you're playing a full power and you have a great metal tone at whatever level you decide to play at.

The Tone control works really effectively and allows you to make quick adjustments to your overall sound should you for example change guitars.

The Laney Ironheart IRT60H is a thoroughly modern tube head capable of full on metal tones but offers you far more than other metal oriented amps. It's loaded with a pair of premium TAD 6L6 loaded tubes. The feature packed preamp is laid out logically and features three distinct channels (Clean, Rhythm and Lead). Each channel features passive 3-band EQ with push pull options for Deep, mid shift and treble shift which allows you to dial in the exact tone you are after. The master section features an overall Dynamics control which allows you to vary the interaction of the amp the drivers. Depending on the volume, an overall Tone control, a Laney custom Digital Reverb and a Watts feature allow you to dial the out put of the amp back to a whisper without destroying your tone.

One of the coolest features of the IRT60H is a switchable Pre-Boost facility which functions just like kicking in your favorite boost pedal in front of your amp. This gives your playing more dynamics and feel. The rear panel of the unit features everything you need to connect your outboard gear, a variable level FX loop, a variety of extension speaker sockets and the supplied FS4-IRT footswitch connection socket. You'll also find the switch that gives you the ability to change the output tubes from the factory should you like. Finished in tough black basket weave Tolex with matching front fret and brooding red glow, it looks as good as it sounds.

The L20T-112 combo features the same highly respected preamp design as the rest of the Lionheart range and consists of a clean and drive section with shared 3 band EQ, global reverb and an overall tone control.

The L20T-112's all valve power amp houses a road tested 20 Watt Class A parallel single ended EL84 equipped output section, not previously seen in a Lionheart 1 x 12 combo. This offers the player an increased headroom option in a combo whilst still giving masses of vintage valve tone in a compact stylish package.

The rear panel of the L20T-112 features a footswitch socket for switching channel and reverb with the FS2 provided, an FX loop for connecting external FX devices and finally an external speaker socket for adding an additional speaker enclosure such as the LT212. The L20T-112 also features the innovative folding tilt mechanism that has proved popular on the rest of the Lionheart range.

The L20T-112 can sound either vintage or modern depending on how you use the preamp controls - back off the gain, wind up the master and you're cooking up serious retro tone. Digging in hard produces extra bite, or backing off cleans it all up.

The Lionheart range is a significant amplifier in todays market offering serious tone that's often difficult to find even in products costing twice the price. Lionhearts are easy to use and most players will get a great tone out of them within seconds.

Designed and engineered to compliment the L50H’s sonic output each L412 is manufactured from high-grade premium marine plywood and loaded with 4 12” Celestion G12 Heritage drivers which together deliver 120 RMS of great vintage tone.

Finished in the same Marine Blue/Beige livery as the L50H and the rest of the Lionheart range the L412 comes with castors as standard and a protective embroidered slipcover.

Quality speaker cabs from 1x12 to 2x12 to 4x12 quad boxes. Loaded with everything from greenback Celestions® to high quality Fane® speakers. Ibanez, Engl, Hiwatt, and Hughes and Kettner produce professional speaker cabs for all musicians.

If you are looking for an amplifier that can really handle your acoustic guitar and project it with a natural pure voice then look no further than the LA series. Whether you are playing a regular 6 string dreadnaught, a parlour or even a 12 string, you can be confident that every nuance and detail will shine through.

The compact and portable LA12C features 12 watts RMS output and features a single dedicated acoustic channel, full three band EQ and a switchable chorus and produces a full, warm rich acoustic tone that can be further enhanced by an on-board chorus. It also features an AUX socket that lets you connect an external sound source, making it ideal for solo performances with a backing track and finally a headphone socket.

The LA65D houses a twin channel pre-amp that’s packed with features – Channel 1 takes care of a mic input, additional guitar or keyboard. You then have a gain control, independent Lo & Hi EQ and an independent reverb control. Channel 2 takes a similar format to that of the LA35C adding a Pre shape option – for an instant natural mid cut plus bass & treble boost, a phase switch, along with digital chorus and reverb, plus a SHIMMER feature – allowing you to emphasise the sparkly bright sound of the onboard chorus.

The rear of the unit houses a headphone socket, XLR DI out with a ground lift switch to eliminate ground loop hum and FX loop send and return with switchable level/by-pass switch. Finally a footswitch socket allows remote controlling of the chorus and reverb.

The LA65D handles anything plugged into it with ease, be it a regular 6 string dreadnought or parlour, nylon or 12 string, more than anything else what really impressed me was the clarity and definition of the overall sound. Nothing was lost from the natural guitars tone – everything was there, present and correct.

The LA65D range is extremely accurate, detailed and produces an uncomplicated acoustic sound.