Shop

2 x EL84 power tubes combine with 3 x ECC83/12AX7 pre-amp tubes to deliver 15W RMS power with natural drive and warmth. Opt for either the full 15 watts RMS power or <1W power. <1W is ideal for recording and practice without sacrificing tone; 15W allows for stage-ready volume levels. HH custom-designed 12” drivers with open-back cabinet speakers for dynamic, responsive interaction with tube amplifier; integrated tilt stand under the cabinet enhances projection and tonal variation. Independent Gain and Volume control allows preamp drive to be balanced with the output level, progressing from warm cleans to rich overdrives. 3-band tone stack with Bass, Middle and Treble controls; ‘Tone’ control the overall top-end response, reduce upper-end harmonics on the output and pre-amplifier overdrive.

The CUB 8 is a brand new, all tube guitar amp with its roots fairly and squarely back in the very beginning of tube amp production. The design ethos behind the CUB amps is 'Small is Beautiful!' There are plenty of situations when small is king and having an amplifier like the CUB 8 allows you to get 'THAT' vintage sound. The CUB 8 features a classic single-ended Class A design, and is loaded with a single ECC83 in the pre amp section and a single 6V6GT in the output section generating 5 watts RMS of vintage tube tone. The CUB 8's control panel is simplicity personified - a tone control, a volume control, Hi and LO input and that's your lot. The CUB 8 houses an 8" Celestion driver. Using a CUB 8 is straightforward, plug in, dial in your tone and wind the volume up a little and the 6V6GT's respond in a bright, bouncy and brilliant fashion. Drive the output section harder and the increased 2nd and 3rd order harmonics give the tone a pronounced bottom end and a lovely lower mid.

The GH30R-112 combo gives something back to the modern guitar player that for too many years has been overlooked. In a world obsessed by pre-amp distortion, the dark art of power amp distortion has been lost – until now. The GH30R-112 delivers transparent, versatile classic rock tones with the ability to blend in the dynamic characteristic of pre-amp distortion and power amp distortion right there at your fingertips.

Loaded with a specially chosen Celestion V-Type driver the GH30R-112 delivers an impressive stage presence for such a compact combo. Both channels on the GH30R-112 produce the same tonal characteristic but how you set them up gives you the subtle difference that tone hounds dream about.

The IRT-Studio-SE offers the same classic tones as the big Ironheart amps, but in a low-power, compact, and lightweight design. Equipped with ECC83 Preamp valves and EL84 output valves, the IRT-Studio amp delivers 15W of pure tonal power, with the option to switch to less than 1W via the second input for times when loud volumes aren’t permitted. Even with is compact design, the amp head still offers 3 channels and a wide range of control to dial in the perfect tone for any situation. Its 3 band EQ features push/pull EQ shift functions, extended the frequency ranges for further tone shaping, while the dynamics, tone, and reverb controls allow players to give their sound a personal touch.

Along with its incredible tonal capabilities, the Ironheart Studio features a variety of ins/outs to seamlessly integrate into existing rigs. Its D.I. output is perfect for directly connecting the amp head to DAWs, PAs, and mixing consoles, and features a high-quality speaker emulator to deliver all valve tones to your DAW or PA, or even both at the same time. The amp is also equipped with an internal dummy load, removing the need to connect an external speaker and deliver a truly silent recording. The FX loop is idea for connecting your favourite stompboxes, and the Aux in is perfect for playing along to backing tracks and songs.

The Laney IRT15H-2 15W tube guitar amp head delivers a single Ironheart channel that's flavored with 12AX7 (preamp) and EL84 (power amp) tubes. For when 15W is too much, there's also a 1W guitar input. Other features include high-quality digital reverb, an FX loop with variable level control and a DI output.

The IRT412 custom-designed straight guitar cabinet is constructed from rugged plywood and loaded with 4 Custom 12” HH drivers handling 320 watts. Laney Amplification began in 1967 when Lyndon Laney, whilst playing in a local band, 'The Band of Joy' with John Bonham on drums and Robert Plant on vocals, turned his musical interest into amplifier construction. Initially working in his father’s garage. Lyndon Laney sought to design and build amplifiers with key 'tonal' characteristics that were unheard of at the time. Formed in 1967 by Lyndon Laney, Laney Amplification is a West Midlands based guitar and musical instrument amplifier manufacturer who were closely involved with Tony Iommi of Black Sabbath in the birth of the ‘Heavy Metal’ music genre. Since 1967, Laney Amplification has gone on from strength to strength and is now a multinational.

Designed and engineered in the Black Country, Great Britain, the Ironheart IRT412 is a standard-sized, straight guitar cabinet loaded with 4 x 12” HH drivers designed to deliver punch and clarity when used with any amplifier.

Constructed from rugged plywood the IRT412 is finished with black metal corners, black textured front fret, black basket weave Tolex, steel castors and comfortable side mounted bar handles the IRT412 cabinet is designed to survive a life on the road for years to come.

Lionheart represents everything we've learned through forty years of Laney tube heritage, distilled into a single ampilfier range. Designed to deliver the ultimate tone of a tube being pushed hard - warm and expressive, at an output level which can be used in everyday environments.

This twin channel, all tube amplifier features 'Parallel single-ended' Class A output from 4x EL84 matched tubes, providing 20 watts of rich tube power.

The L20H also features gold plated PCB's and jack sockets. Sealed gold contact relays are used in all signal paths for minimum sound coloration, and the amp comes fitted with the renowned "Type 4" large spring line reverb for the classic guitar reverb sound.

Each L20H features a hand stamped 'build number' in the order they come off the Laney production line, and comes with a custom made 'Lionheart' dust cover.